Aruba AP-114 Manual

Aruba Adgangspunkt AP-114

Læs gratis den danske manual til Aruba AP-114 (5 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 105 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 53 anmeldelser. Har du et spørgsmål om Aruba AP-114, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Aruba 110 Series Access Points Aruba Data Sheet

Multifunctional and affordable 110 series wireless access

points (APs) maximize mobile device performance in high-

density Wi-Fi environments while minimizing interference

from LTE cellular networks.

These high-performance 802.11n APs deliver wireless data rates

up to 450 Mbps per radio and employ three spatial streams to

support 50% more throughput and mobile devices than previous-

generation APs.

The AP-115 and IAP-115 APs feature a 2.4-GHz and a 5-GHz radio,

each with 3x3:3 MIMO and three integrated omni-directional downtilt

antennas. The AP-114 and IAP-114 models feature the same radios

with three combined and diplexed external antenna connectors.

AdvAnced cellulAr coexistence (Acc)

The 110 series Advanced Cellular Coexistence (ACC) feature enables

Aruba WLANs to perform at peak efciency by minimizing

interference from 3G/4G LTE networks, distributed antenna systems

and commercial small-cell/femtocell equipment.

Wi-Fi client oPtiMiZAtion

To eliminate sticky client behavior while users roam, the 110 series

features patented ClientMatch™ technology, which continuously

gathers session performance metrics from mobile devices.

If a mobile device moves out of range of an AP or if RF interference

impedes performance, ClientMatch automatically steers the device

to a better AP.

Best-in-clAss rF MAnAGeMent

All Aruba APs include Adaptive Radio Management™ technology,

which is essential to creating the most reliable, high-performance

WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to

optimize Wi-Fi client performance and ensures that Aps stay clear

of RF interference.

The 110 series can be congured to provide part-time or

dedicated air monitoring for spectrum analysis and wireless

intrusion protection, VPN tunnels to extend remote locations to

corporate resources, and wireless mesh connections where

Ethernet drops are not available.

cHoose Your oPerAtinG Mode

The 110 series of APs offers a choice of operating modes to meet

your unique management and deployment requirements.

• Controller-managed mode. When managed by Aruba Mobility

Controllers, 110 series APs offer centralized conguration, data

encryption, policy enforcement and network services, as well as

distributed and centralized trafc forwarding. Please refer to the

Aruba Mobility Controller data sheets for more details.

• Aruba Instant™ mode. In Aruba Instant mode, a single AP

automatically distributes the network conguration to other

Instant APs in the WLAN. Simply power-up one Instant AP,

congure it over the air, and plug in the other APs – the entire

process takes about ve minutes.

For large installations across multiple sites, the Aruba Activate™

service signicantly reduces deployment time by automating

device provisioning, rmware upgrades, and inventory

management. With Aruba Activate, Instant APs are factory-shipped

to any site and congure themselves when powered up.

If WLAN and network requirements change, a built-in migration

path allows 110 series Instant APs to become part of a WLAN that

is centrally managed by a Mobility Controller.

oPerAtinG Modes

• 802.11a/b/g/n controllerless Aruba Instant AP

• 802.11a/b/g/n Mobility Controller-managed AP

• Remote AP (RAP)

• Spectrum analysis identies sources of RF interference

• Air monitor provides wireless intrusion protection

• Hybrid AP serves Wi-Fi clients and provides wireless intrusion

protection and spectrum analysis

• Secure enterprise mesh

securitY

• With an service subscription, Aruba Instant RAPs OpenDNS

deliver integrated web ltering, malware and botnet protection to

every device connected to the WLAN

• Integrated Trusted Platform Module (TPM) for secure storage of

credentials and keys

• SecureJack-capable for secure tunneling of wired Ethernet trafc

AruBA 110 series Access Points

Optimize client performance in high-density Wi-Fi environments

Aruba 110 Series Access Points Aruba Data Sheet

Wireless rAdio sPeciFicAtions

• AP type: Indoor, dual radio, 5-GHz and 2.4-GHz 802.11n 3x3:3

• Software-congurable dual radio supports 5-GHz (Radio 0) and

2.4-GHz (Radio 1)

• 3x3 MIMO with three spatial streams and up to 450 Mbps

wireless data rate

• Supported frequency bands (country-specic restrictions apply):

-2.4000 to 2.4835 GHz

-5.150 to 5.250 GHz

-5.250 to 5.350 GHz

-5.470 to 5.725 GHz

-5.725 to 5.850 GHz

• Available channels: Dependent on congured regulatory domain

• Dynamic frequency selection (DFS) optimizes the use of

available RF spectrum

• Supported radio technologies:

-802.11b: Direct-sequence spread-spectrum (DSSS)

-802.11a/g/n: Orthogonal frequency-division multiplexing (OFDM)

• Supported modulation types:

-802.11b: BPSK, QPSK, CCK

-802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

• Transmit power: Congurable in increments of 0.5 dBm

• Maximum (aggregate, conducted total) transmit power (limited

by local regulatory requirements):

-2.4-GHz band: +28 dBm (23 dBm per chain)

-5-GHz band: +25 dBm (20 dBm per chain)

• Advanced Cellular Coexistence (ACC) minimizes interference

from LTE cellular networks

• Maximum ratio combining (MRC) for improved receiver performance

• Cyclic delay/shift diversity (CDD/CSD) for improved downlink

RF performance

• Short guard interval for 20-MHz and 40-MHz channels

• Space-time block coding (STBC) for increased range and

improved reception

• Low-density parity check (LDPC) for high-efciency error

correction and increased throughput

• Supported data rates (Mbps):

-802.11b: 1, 2, 5.5, 11

-802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

-802.11n: 6.5 to 450 (MCS0 to MCS23)

• 802.11n high-throughput (HT) support: HT 20/40

• 802.11n packet aggregation: A-MPDU, A-MSDU

PoWer

• Maximum power consumption: 13 watts, plus up to 2.5 watts

for attached USB device.

• Power sources sold separately

• Direct DC source: 12 Vdc nominal, +/- 5%

• Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af or

802.3at-compliant source

-USB host port is disabled when using an 802.3af PoE power

source; for unrestricted operation with PoE power, use an

802.3at compliant source

AntennAs

• AP-114: Three RP-SMA connectors for external dual-band

antennas. Internal loss between radio interface and external

antenna connectors (due to diplexing circuitry): 1.5 dB in

2.4-GHz and 2.5 dB in 5-GHz.

• AP-115: Six integrated down-tilt omni-directional antennas for

3x3 MIMO with maximum antenna gain of 4.5 dBi in 2.4-GHz

and 5.5 dBi in 5-GHz. Built-in antennas are optimized for

horizontal ceiling mounted orientation of AP-115.

otHer interFAces

• 10/100/1000BASE-T Ethernet network interface (RJ-45)

-Auto-sensing link speed and MDI/MDX

-802.3az Energy Efcient Ethernet (EEE)

-PoE-PD: 48 Vdc 802.3af PoE or 802.3at PoE+

• DC power interface, accepts 1.7/4.0-mm center-positive

circular plug with 9.5-mm length

• USB 2.0 host interface (Type A connector)

• Serial console interface (RJ-45, TTL levels)

• Visual indicators (LEDs):

-Power/system status

-Ethernet link status (ENET)

-Radio status (2x; RAD0, RAD1)

• Kensington security slot

• Reset button

MountinG

• Included with AP:

-Mounting brackets (2) for attaching to 9/16-inch or

15/16-inch T-bar drop-tile ceiling

• Optional mounting kits:

-AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-

grid rail adapters for Interlude and Silhouette style rails

-AP-220-MNT-W1: Aruba AP mount kit contains one at-

surface wall/ceiling mount bracket

-AP-220-MNT-W2: Aruba AP mount kit contains one at-

surface wall/ceiling secure mount cradle

MecHAnicAl

• Dimensions/weight (unit, excluding mount accessories):

-180 mm (W) x 180 mm (D) x 45 mm (H)

-7.09” (W) x 7.09” (D) x 1.77” (H)

-650 g (1.43 lbs)

• Dimensions/weight (shipping):

-220 mm (W) x 225 mm (D) x 55 mm (H)

-8.66” (W) x 8.86” (D) x 2.17” (H)

-880 g (1.94 lbs)

environMentAl

• Operating:

-Temperature: 0° C to +50° C (+32° F to +122° F)

-Humidity: 5% to 95% non-condensing

• Storage and transportation temperature range:

-Temperature: -40° C to +70° C (-40° F to +158° F)

Produkt Specifikationer

Mærke:	Aruba
Kategori:	Adgangspunkt
Model:	AP-114

Har du brug for hjælp?

Hvis du har brug for hjælp til Aruba AP-114 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Adgangspunkt Aruba Manualer

10 August 2025

19 September 2024

5 September 2024

28 August 2024

28 August 2024

Aruba Instant IAP-175 Manual

10 August 2024

Aruba AP-93H Manual

9 August 2024

Aruba AP-567 Manual

5 August 2024

Aruba Instant IAP-175P Manual

3 August 2024

Aruba Instant RAP-108 Manual

1 August 2024

Adgangspunkt Manualer

Nyeste Adgangspunkt Manualer

Devolo Magic 2 WiFi 6 next Manual

16 September 2025

AMX NXA-WAP-R500 Manual

15 September 2025

AirTies WOB-201 Manual

14 September 2025

AirTies Air 4820 Manual

14 September 2025

TP-Link Omada EAP772 Manual

7 September 2025

IP-COM W36AP Manual

3 September 2025

IP-COM PRO-6-MINI Manual

2 September 2025

IP-COM AP515 Manual

2 September 2025

Silex AP-500AC Manual

30 August 2025

Alcatel-Lucent AP1251 Manual

29 August 2025