Aruba Instant On AP11 Manual

Aruba Adgangspunkt Instant On AP11

Læs gratis den danske manual til Aruba Instant On AP11 (33 sider) i kategorien Adgangspunkt. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Aruba Instant On AP11, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/33

Aruba Instant On AP11 Access Point

Installation Guide

Rev01 | June 2019 1

The Aruba Instant On AP11 dual-radio access point supports IEEE 802.11ac Wave 2, delivering high performance

with 2x2 MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /

n wireless services. The AP11 access point is designed for ceiling and wall mount.

Package Contents

1 x AP11 access point

1 x Ceiling mount bracket (suspended ceiling rail)

1 x Wall/ceiling mount bracket (solid surface)

1 x Ethernet cable

Hardware Overview

The following sections outline the hardware components of the AP11 access point.

Figure 1 AP11 (front view)

If you have ordered AP11 bundle, the package would also include a power adapter and cord to power the AP

through an electrical power outlet.

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

System

Radio

2Aruba Instant On AP11 Access Point | Installation Guide

LED

The AP11 access point has two LEDs that indicate the system and radio status of the device.

Figure 2 AP11 (rear view)

E0/POE Port

The AP11 access point is equipped with one 10/100/1000Base-T auto-sensing, MDI/MDX Ethernet port (E0) for

wired network connectivity. This port supports IEEE 802.3af Power over Ethernet (PoE), accepting 48Vdc

(nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE

midspan injector, or network infrastructure that supports PoE.

DC Power Socket

If PoE is not available, a proprietary Aruba 12V/30W power adapter can be used to power the AP11 access point.

This power adapter is available in the box if you buy the AP11 and power adapter bundle.

Additionally, a locally-sourced AC-to-DC adapter (or any DC source) can be used to power this device, as long as it

complies with all applicable local regulatory requirements and the DC interface meets the following

specifications:

12 Vdc (+/- 5%) and at least 12W

2.1/5.5 mm center-positive circular plug, 9.5 mm length

Table 1 AP11 Access Point LEDs Status

LED Color/State Meaning

System No Lights Device has no power

Blinking Green Device is starting

Alternating Green/Amber Device is ready for setup

Solid Green Device is ready

Solid Amber Device has detected a problem

Solid Red Device has an issue- immediate action required

Radio No Lights Wi-Fi is not ready, wireless clients cannot connect

Solid Green Wi-Fi is ready, wireless clients can connect

DC Power Socket E0/POE Reset

Produkt Specifikationer

Mærke:	Aruba
Kategori:	Adgangspunkt
Model:	Instant On AP11
Bredde:	152 mm
Dybde:	152 mm
Højde:	34 mm
Vægt:	193 g
Produktfarve:	Hvid
Relativ luftfugtighed ved drift (H-H):	5 - 93 %
Ethernet LAN-porte (RJ-45):	1
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Sikkerhedsalgoritmer:	WPA2
Placering:	Ceiling, Wall
Netværksstandarder:	IEEE 802.11ac, IEEE 802.11n, IEEE 802.3af
Udgangsspænding:	12 V
Slot til kabellås:	Ja
Maksimal dataoverførselshastighed:	1167 Mbit/s
Antenne type:	Intern
Kabellåseslids type:	Kensington
Strøm over Ethernet (PoE):	Ja
MIMO:	Ja
2.4 GHz:	Ja
5 GHz:	Ja
Antennefunktioner:	Integreret antenne
Niveau for antennestyrke (maks.):	5.8 dBi
Maksimal dataoverførselshastighed (5 GHz):	867 Mbit/s
Maksimal dataoverførselshastighed (2,4 GHz):	300 Mbit/s
MIMO type:	Multi User MIMO
Antenneretningstype:	Omniretningsbestemt