Atdec TH-2250-VF Manual

Atdec Ikke kategoriseret TH-2250-VF

Læs gratis den danske manual til Atdec TH-2250-VF (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Atdec TH-2250-VF, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Plastic Anchor (x4)

Self-Tapping Screw (x4)

Hardware

Dry Wall Anchor (x4)

M6 Washer

(x4)

M4x12/25/30mm

(x4 each)

M5x12/25/30mm

(x4 each)

M6x12/25/30mm

(x4 each)

Display Mounting

Screws

Self-Tapping Screw

M6 Washer

Wall Plate

Plastic Anchor

8mm (

") Hole

Dry Wall

Timber Stud

10mm (

") Hole

Dry Wall Anchor

Dry Wall Anchor Screw

Washer

Wall Plate

Self-Tapping Screw

M6 Washer

Wall Plate

4mm (

") Hole

Timber Stud

13mm Spacer

Bush (x4)

20mm Spacer

Bush (x4)

M5x10mm

Security Screw (x4)

Components Checklist

Wall Plate

Display Plate

IMPORTANT INFORMATION

! IMPORTANT - Install Wall Mount as per Installation Instructions.

! This product supports a maximum load of 50kg (110lbs).

! This products only supports VESA compliant displays with 50mmx50mm (2"x2"), 75mmx75mm (3"x3"),

100mmx100mm (4"x4"), 120mmx180mm (4¾"x7"), 200mmx100mm (8"x4") and 200mmx200mm

(8"x8") mounting hole patterns.

! The manufacturer does not accept responsibility for incorrect installation.

Step 1. Check Components

Check you have received all parts against the component checklist and Hardware above.

Step 2. Mounting the Wall Plate

Tip: Use a spirit level to ensure wall plate is horizontal

Masonry Wall

Tools Required:

Power Drill



4mm (

") drill bit



Phillips Head screwdriver 

8mm (

") masonry drill bit



10mm (

drill bit



Spirit Level



Installation Instructions

Flat Screen Wall Mount | Fixed

TH-2250-VF

Display

Wall Plate Slots

Display Plate Side Flange

Display

M5 Security

Screw

Mounting Screw

Back of Display

Display Plate

Recessed Mounting Holes

If the mounting holes are reccessed into the back of the

display, use the supplied Spacer Bushes to pack the

recessed holes. Ensure that the correct length mounting

screws are used to securely attach the plate to the display.

TOP

Mounting Screw

Back of Display

Display Plate

Spacer Bush

Recessed

Mounting Hole

Step 3. Mounting the Display Plate

With the Display Plate attached

to the Display, lift the Display,

slide into the Wall plate. Ensuring

that the side flanges engage into

wall plate slots.

Step 4. Attaching Display to Wall Plate

To properly secure the display

to the wall it is recommended

to used the four M5 security

screws to securely attach the

two plates together.

Step 5. Security Option

Installation Complete

No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 01.03.10 ©

Produkt Specifikationer

Mærke:	Atdec
Kategori:	Ikke kategoriseret
Model:	TH-2250-VF
Produktfarve:	Sølv
Pakkevægt:	1600 g
Monteringstype:	Væg
Pakkens dimensioner (BxDxH):	254 x 36 x 238 mm
Skærmstørrelse kompatibilitet:	20 - 47 "
Monteringsgrænseflade:	VESA 100mm x 100mm / 100mm x 200mm / 200mm x 200mm
Vægt (maks.):	50 kg