Atdec TH-FM Manual


Læs gratis den danske manual til Atdec TH-FM (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Atdec TH-FM, eller vil du spørge andre brugere om produktet?

Side 1/3
FURNITURE
ROTATION
ADJUSTMENT
Check Clearance
Installation Instructions
TH-FM
Component Checklist
Furniture Mount
Pole Assembly
! IMPORTANT - Install Telehook Furniture Mount as per installation instruction.
! This product supports a maximum load of 35kg (77lbs.).
! This product has a universal mounting hole pattern that suits a broad range of TV’s:
From 100-600mm in width and 100-400mm in height.
! The manufacturer accepts no responsibility for incorrect installation.
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Step 2. Limit Rotation and Position
2mm Allen Key
UP
Step 3. Check Space
Before installing your TH-FM check your
proposed location has enough space for
the amount of rotation you are planning
to use.
M6x10 Security
Screw (x3)
4mm Security
Allen Key
M8x45mm/65mm
Coach Bolt (x4 each)
Security Nut (x5)
IMPORTANT INFORMATION:
The Limit of Rotation
is dependant on the
location of the Set
Screw.
M6 Washer (x7)
M8 Washer (x4)
M6 Spacer (x4)
M8 Spacer (x4)
HARDWARE
Display Mounting
Screws (x4 each)
M6x16mm/30mm
M8x16mm/30mm
2mm Allen Key
NOTE: Use 2mm Allen Key to remove and insert M4x8
Grub Screw to the desired hole position.
M4x8 Set
Screw
points forward
Option 2
90°
Option 3
180°
Option 1 (Factory Set:
Set Screw at 0°)
Option 4 - remove Set Screw
for free 360° rotation.
WALL
WALL
Check Clearance
Tools Required:
8mm Drill Bit
50mm Hole Saw
Adjustable Wrench
Mounting Bracket (x2) Top Cap
45mm or 65mm
Coach Bolt (x4)
Security Nut (x4)
8mm Drilled
Hole (x4)
Spare Security Nut
(use spare Security Nut to tighten other Security Nuts)
DESK
Furniture Mount
orientation
arrow
Step 5. Locate and Secure the Furniture Mount
OPTION 1
APPLY
ADHESIVE
GLASS STONE SURFACE or
OPTION 2
Step 6. Install the Horizontal Rail
Notch
Pin
1. Hook the notch on to the pin.
HOOK
2. Insert the two M6 Security Screw to secure the Horizontal Rail.
Leave untightened to allow Tilt Adjustment.
M6x10
Security Screw (x2)
Step 7. Tilt Adjustment
4mm Security
Allen Key
use the square holes
as template in drilling
holes to the desk.
NOTES:
1. Use 45mm Coach Bolt for 15-25mm surface
thickness and 65mm Coach Bolt for 25mm-
45mm surface thickness.
2. Remove the spare Security Nut after tightening
other Security Nuts. Keep it in a safe place for
future usage.
Step 4. Cable Management
SNAP OFF
SNAP OFF
OPTION 2
OPTION 3
NOTE: The cable needs to be in place BEFORE the
furniture mount is attached to the furniture top when
using this configuration.
OPTION 1
A 50mm cable access
hole will need to be
made on the desk top to
allow cable access from
below for Option 1.
DESK
Rear Cable Port
Base Cable Port
Atdec recommends a good quality
Brand Name contact adhesive. Please
follow directions on the product.
Adjustable
Wrench
NOTE: If Option 2 is preferred to secure
your Furniture Mount, all cables need to
be in place before the Furniture Mount is
attached to the surface.
M6 Washer (x2)
OPTION 2: 5° Incremental Tilt Adjustment from -5° to +20°
M6x10
Security Screw
20°
10°
-5°
15°
Tighten all screws to lock the
position after tilt adjustment.
4mm Security
Allen Key
M6 Washer
OPTION 1: -5° to +20° Free Tilt Adjustment
-5°
+20°
Loosen Security Screws
on both sides to adjust
and tighten to secure
the desired tilt.
The Security Nuts can only
be tightened or loosened in
conjunction with the spare
Security Nuts.


Produkt Specifikationer

Mærke: Atdec
Kategori: Ikke kategoriseret
Model: TH-FM
Produktfarve: Sort
Husmateriale: Stål
Monteringstype: Skrivebord
Hældningsvinkelområde: -5 - 20 °
Rotationsvinkel: 360 °
Maksimal vægtkapacitet: 35 kg
Maksimal skærmstørrelse kompatibilitet: - "
Antal understøttede skærme: 1
Minimal skærmstørrelse kompatibilitet: - "
Montering interface kompatibilitet (min.): 100 x 100 mm
Montering interface kompatibilitet (maks.): 600 x 400 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Atdec TH-FM stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Atdec Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025
Navman

Navman MiVue 745 Manual

1 August 2025
Hitachi

Hitachi WR22SE Manual

1 August 2025
Synology

Synology M2D20 Manual

1 August 2025
Buffalo

Buffalo GC882 Manual

1 August 2025