Audibax Ground 6T Manual

Audibax Højttaler Ground 6T

Læs gratis den danske manual til Audibax Ground 6T (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Audibax Ground 6T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

GROUND GROUND 4T / 5T

Please read the manual before using the product

USER´S

MANUAL

GROUND 4T

GROUND 5T

2. Attach the

landscape spike to the

speaker.

3. Connect the wire to the speaker and

attach the top cover to the speaker.

For the Ground 5T(from power amplifier to

next speaker)

5. Connections (For Speakers with

Transformer)

Ensure that the speaker is unplugged from

the mains before making any connections.

For the Ground 4T (From Power Amplifier to

Next Speaker)

Landscape Installation

SPECIFICATIONS

CARE AND MAINTENANCE

·Turn off the power to the speaker when unused for long periods of time.

·Ensure all equipment is turned OFF prior to cleaning.

·Surfaces and cabinet need only occasional dusting/cleaning. Never touch the speaker

drivers. Never use chemicals or solvents as they may damage the surface. Always clean using

a dry cloth.

1 2 3 4

+ + - -

1 2 3 4

+ + - -

1 2 3 4

+ + - -

1 2

+ -

1 2

+ -

1 2

+ -

Ground

Mounting

Model

Ground 4T

Ground 5T

Woofer

4" PP Cone

5.25" PP Cone

Tweeter

0.75"

Silk

Dome

Silk

Dome

Frequency Response

120Hz-20kHz

110Hz-20kHz

Sensitivity(1M/1W)

83dB

84dB

Nominal Impedance

8ƺ

RMS Power

20W

30W

Transformer

C70V: 1.25W-2.5W-5W-10W-N C & 8ƺ

C100V: 2.5W-5W- 10W-20W-NC & 8ƺ

C70V: 1.87W-3.75W-7.5W-15W-NC&8 ,ƺ

C100V: 3.75W-7.5W-15W-30W-NC&8ƺ

IP Level

IP 66 (W all/Floor Speaker Only)

Product Dimensions

138 x138 x190mm (5.4" x 5.4" x 7.5")

170 x170 x240mm (6.7" x 6.7" x 9.4")

GROUND GROUND 4T / 5T USER´S

MANUAL

1 2

SAFETY INSTRUCTIONS

1. Please read the instructions carefully before installation and use. Keep the manual safe for

future reference.

2. Prior to installing the speakers into any ceiling or wall, check the structure for weight

bearing ability and avoid contact with any wiring or plumbing that might be behind the

surface area. Installing on soft materials or in areas incapable of supporting the speakers’

weight may cause personal injury or damage to the speaker.

3. Make sure the speaker is properly secured to the ceiling/wall. Please use the proper

screws, bolts, or anchors (not included). Failure to do so may cause the speaker to become

unsecured and cause potential damages/injuries.

4. Use only approved and certified wiring in your installation, do not stretch or place the wire

in contact with sharp objects.

5. Damage to the woofer and tweeter may occur if the speaker is dropped or hit - resulting

in no sound or distorted sound.

6. Never overdrive your speakers to the point of distortion and always reduce volume prior to

switching input sources (e.g.: FM to CD).

7. When installing the speakers outside, choose areas such as the underside of eaves to

avoid strong direct sunlight which may affect the color and life of the speaker enclosure.

8. When placing the speakers on a wall or shelf, it is recommended that speakers be

installed at the level of the ear or slightly higher.

9. To tilt the speaker, loosen the adjustment screw found on the bracket. Tilt the speaker to

the desired position and tighten the screws securely. The speaker can rotate 360 ° up and

down while in wall/floor mounting.

10. Prior to removing cables ensure all power to your amplifier and other components is

turned OFF.

PACKING LIST

end cap

Ceiling

Pole

Carabiner

Hanging Cable

Eye Bolt

Speaker

adjustable stand

Speaker User manual

top cover eye bolt & nut hanging cable carabiner X2 buckle part

end cap steel base plate landscape spike

adjustable

stand screws X5

screws X4 buckle part

Accessories for Pendant Hanging

Accessories for Landscape Installation

INSTALLATION

Wall Mounting

Hanging

1. Connect the wires from the amplifier (or the previous speaker) to the supplied terminal

block of the speaker, and ensure red wire to “+” and black wire to “–“. Attach the top cover

to the speaker.

2. Route the speaker cable hanging from the ceiling area through the top cover, and dress

the cables to the wire rope using plastic cable ties, strip the ends of the cables

approximately 1/8" to 3/16" and, if the wire is stranded, twist the strands.

3. Fasten the provided eye bolt to the top cover and speaker.

Note: If mounting to the wall with the mounting bracket, mount the bracket using the

appropriate hardware and securely attach to the wall.

Accessories for Wall Mounting

Caution: if you use

the hanging cable,

do not use outdoors

Produkt Specifikationer

Mærke:	Audibax
Kategori:	Højttaler
Model:	Ground 6T

Har du brug for hjælp?

Hvis du har brug for hjælp til Audibax Ground 6T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Audibax Manualer

Audibax PR-52 A Manual

12 Juni 2025

Audibax Denver 12 Manual

5 Januar 2025

Audibax CM508L-BT Manual

5 Januar 2025

Audibax Freeport 212P Manual

5 Januar 2025

Audibax Drop 6 Manual

5 Januar 2025

Audibax Denver 6 Manual

5 Januar 2025

Audibax CM608L-BT Manual

5 Januar 2025

Audibax GA05-T Manual

5 Januar 2025

Audibax CM408-BT4 Manual

5 Januar 2025

Audibax GA08-T Manual

5 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025

SpringFlora HM11 Manual

14 Juni 2025

Fiodio F-130 Manual

14 Juni 2025

HEYSONG Bubble Manual

14 Juni 2025

ANCOBER ACB-001 Manual

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025