Audio-Technica AE5400 Manual

Audio-Technica Mikrofon AE5400

Læs gratis den danske manual til Audio-Technica AE5400 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Audio-Technica AE5400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

User Manual

Cardioid Condenser Handheld Microphone AE5400

■Features

■Notes on use

■Connection procedure

This product requires 48 V

DC phantom power.

Outp n sut termi al

PIN1 (ground)

PIN3

(cold)

PIN2 (hot)

■Speciﬁcations

Externally polarized (DC Bias) condenser

Cardioid

20 - 20,000 Hz

80 Hz, 12 dB/octave

-40 dB (10.0 mV) re 1V at 1 Pa

150 ohms

147 dB SPL, 1 kHz at 1% T.H.D.

157 dB SPL, with 10 dB pad (normal)

14 dB SPL

133 dB, 1 kHz at Max SPL

80 dB, 1 kHz at 1 Pa

11-52 V DC, 3 mA typical

High-pass ﬁlter,

10 dB pad (normal)

Integral 3-pin XLRM-type

• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

* Typical, A-weighted, using Audio Precision System One.

■P r atternola p

■Fr r o eequency esp ns

180°

150°

120°

30°

0°

330°

300°

270°

240°

210°

Audio-Technica Corporation

2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan

Global Support Contact: www.at-globalsupport.com

11-DEC--2020 Form No.ATGC-L0389-20

LEGEND

0°, 50cm

SCALE IS 5 DECIBELS PER DIVISION

LEGEND

200 Hz

1 kHz

5 kHz

8 kHz

Thank you for purchasing this product. Before using the product, read through the user

manual to ensure that you will use the product correctly.

Please keep this manual for future reference.

Oﬀering exceptional sound quality, the AE5400 uses the same condenser element as the

classic AT4050 studio microphone. This large diaphragm element ensures an accurate,

natural response. With a 80 Hz HPF switch and 10 dB pad, the sound can be perfectly

tailored to suit your voice. With a hardened steel body and grille and multi-stage internal

windshield, the AE5400 is rugged and durable, with exceptionally low handling noise and

protection against plosives and sibilance, making it a fantastic on stage microphone.

Output from the microphone’s XLRM-type connector is low impedance (Lo-Z) balanced. The

signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” –

positive acoustic pressure produces positive voltage at Pin 2.

When using the AE540 in settings with a stage monitor speaker, the speaker should be

located 180° oﬀ axis (at rear of the microphone). This placement, in conjunction with the

microphone's uniform cardioid pickup pattern, will virtually eliminate the possibility of

undesired audio feedback.

Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C

for extended periods. Extremely high humidity should also be avoided.

Connect e as a microphone the output terminals of the microphone to a d vice that h

input (balanced input) compatible with a phantom p er supply. The output connector ow

is an XLRM-type with polarity as shown in the ﬁgure below.

For product improvement, the product is sublect to modiﬁcation without notice.

• Same element as the renowned AT4050 studio condenser

• Condenser element gives pristine natural sound quality

• Hardened steel body and grille for rugged durability

• Cardioid polar pattern gives improved sound isolation

• Multi-stage grille for reduced plosives and sibilance

• Integral 80 Hz HPF switch and 10 dB pad

• Ergonomic design for easy handling

■Safety precaution

■Cautions for the product

Although this product was designed to be used safely, failing to use it correctly may result in

an accident. To ensure safety, observe all warnings and cautions while using the product.

• Do not subject the product to strong impact to avoid malfunction.

• Do not disassemble, modify or attempt to repair the product.

• Do not handle the product with wet hands to avoid electric shock or injury.

• Do not store the product under direct sunlight, near heating devices or in a hot, humid or

dusty place.

Element

Polar pattern

Frequency response

Low Frequency response

Open circuit sensitivity

Impedance

Maximum input sound level

Noise

Dynamic range (typical)

Signal-to-noise ratio

Phantom power requirements

Switch

Output connector

Roll-oﬀ

330 g

179.0 mm long, 50.0 mm head diameter,

33.0 mm to 22.0 mm tapered body diameter

Weight (less accessories)

Dimensions

Included accessories AT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands;

soft protective pouch

60°

90°

Response in dB

Frequency in Hertz

-10

-20

-30

50010050 200 10k5k1k 2k 20k

10 dB

Produkt Specifikationer

Mærke:	Audio-Technica
Kategori:	Mikrofon
Model:	AE5400
Type:	Scene/optræden mikrofon
Produktfarve:	Black, Blue, Grey
Forbindelsesteknologi:	Ledningsført
Enhedsgrænseflade:	XLR-3
Mikrofonindgangsimpedans:	150 ohm (Ω)
Mikrofon frekvens:	20 - 20000 Hz
Mikrofonretningstype:	Kardioid
Mikrofon sensitivitet:	-40 dB
Mikrofon vægt:	330 g
Signal/støjforhold:	80 dB
Dynamisk interval:	133 dB
Mikrofon dimensioner (DxH):	50 x 179 mm
Mikrofonholder:	Ja