AudioSource AMP310 Manual

AudioSource Modtager AMP310

Læs gratis den danske manual til AudioSource AMP310 (16 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om AudioSource AMP310, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

OWNER’S MANUAL

AMP210 / AMP310

Congratulations on your purchase of the AudioSource® AMP210/310.

Please take a few moments to read this entire manual, and be sure to

retain this document for future reference. Please read and observe all

safety instructions detailed on page 2.

NOTE: if any part of this product is damaged or missing, please call your

dealer or AudioSource® directly at 1.877.915.5439 or 503.914.4688.

Please read your warranty and retain your receipt and original carton for

possible future use.

For more information about AudioSource® electronics, speakers and

accessories please visit www.audiosource.net

AMP210 / AMP310

Home Audio Multi-Zone Power Ampliﬁer

AMP210 / AMP310 Owner’s Manual 8100.0359A

FEATURES:

Line 1 / Line 2 priority input switching

Line 2 auxiliary output

High level input

Speaker A/B switching

Front panel balance and volume trim controls

Independent rear left / right master level controls

Front panel diagnostic LEDs

Signal sensing “Power On”

12VDC “Trigger On”

Triple-Darlington Power Amplifier Stages

Dual-differential error amplifiers

SN Ratio: 100dBA

Rack-mount ready

AudioSource®

13790 SW 72nd Ave.

Portland, OR 97223

503.914.4688

www.audiosource.net

AMP210 / AMP310

OWNER’S MANUAL

• TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTICLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE

• TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO

USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL!

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near heat sources such as radiators, heat registers, stoves,

or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or third prong are provided for your safety. If the provided plug

does not ﬁt into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

the plugs, convenience receptacles, and at the point where they exit from

the appliance.

11. Only use attachments or accessories speciﬁed by the manufacturer.

12. Unplug the apparatus during lightning storms or when unused for long

periods of time.

13. Refer all servicing to qualiﬁed personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

MAGNETIC FIELD: !!CAUTION!! Do not locate sensitive high-gain equipment such as preampliﬁers or tape decks directly above or below the unit. Because

this ampliﬁer has a high power density, it has a strong magnetic ﬁeld, which can induce hum into unshielded devices that are located nearby. The ﬁeld is

strongest just above and below the unit. If an equipment rack is used, we recommend locating the ampliﬁer(s) in the bottom of the rack and the preampliﬁer

or other sensitive equipment at the top.

EXPLANATION OF

SAFETY SYMBOLS