Avantree Jogger Pro Manual

Avantree Øreprop Jogger Pro

Læs gratis den danske manual til Avantree Jogger Pro (5 sider) i kategorien Øreprop. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Avantree Jogger Pro, eller vil du spørge andre brugere om produktet?

Side 1/5
1. Product Descripon
Avantree Jogger Pro (AS6P) is a lightweight Bluetooth stereo headphone with integral microphone. It
is great for use during acve pursuits, such as jogging and exercising. It has a trendy, fashionable
sports design and is splash proof. The headset is equipped with Bluetooth 4.0 technology, so you can
connect two devices simultaneously and enjoy excellent sound quality from the aptX codec. Immerse
yourself in rich audio from your smartphone, Bluetooth enabled MP3 player or tablets. Jogger Pro is
the perfect companion for your workout roune.
2. Product Overview
(1). Speaker
(2). Next
(3). Led indicator
(4). Previous
(5). Headband
(6). Charging socket
(7). Mul-funcon buon(MFB)
(8). Microphone
(9). Volume down
(10). Volume up
What’s in the box:
Avantree Jogger Pro
USB charging cable
Silicone ear buds
Carrying pouch
User manual
Gi card
Oponal:
Travel charger/Car charger/Armband
3. Charging
Avantree Jogger Pro uses a 2.0mm jack charging socket.
1) For the rst charge, please charge the device for at least 2.5 hours to make sure the headset is
fully charged and the baery reaches its full capacity.
2) Aerwards, each charge cycle will take up to 2.5 hours.
3) The LED will indicate red when charging and will turn o when charging is complete.
4) If you have not used the item for a few months, the LED might not immediately light red when
rst charging. In this case, it may take 15-35 minutes before the LED lights red.
Noce:
Use an Avantree cered charger only. Or consult Avantree support before using any other third
party charger.
When baery power is low, the red indicator LED will ash red once every seconds and a 10
“DUDU” sound will come up every one minute.
4. Turn on / o
Turn on : From o, press and hold “MFB” for around 4 seconds, unl the LED indicator shows blue.
Turn o : From on, press and hold “MFB” for around 4 seconds unl the LED indicator shows red.
5. Working with mobile phone (Tutorial online)
It is important to pair the headset with your Bluetooth enabled mobile phone for rst me use.
5.1 Pairing procedure:
A. Ensure the headset is o.
B. Press and hold the MFB buon (about 7-10 seconds) unl the LED blinks and blue red
alternately.
C. Search for the headset from your phone.
D. Once “Avantree Jogger Pro’’ is found in the search list, follow the indicated steps and enter pin
code 0000 to pair (some phones do not request the pin code).
E. Connect the headset to your phone.
F. Your headset is now ready for use.
Once paired and connected, the headset will be automacally connected to your phone whenever
you turn the headset on again, provided your phone is within range.
We nd most of the online technical support quesons are caused by improper pairing between the
headset and the Bluetooth device. Please follow the above instrucons step- -step. by
5.2 Basic Operaons:
Answer a call:
To answer a call: PressMFB” once to answer the call.
To answer a second call: Press “MFB” once to answer a second call and end the rst call
simultaneously.
End a call : Press the “MFB” buon once to end a call.
Reject a call :
Reject a call: Press and hold the “MFB” buon for 3 seconds to reject a call.
Reject a second call: Press the “Previous” buon once to reject a second call.
Voice Dial: Short press both ”V+” and V whilst in standby mode, then say the voice tag you -
wish to call. (Note: Make sure your phone supports voice dialing.)
Last number redialing : In standby mode, double click the “MFB” buon.
● To Switch a call between headset and mobile phone:
From Headset to Mobile Phone: During a call, press and hold “MFB for 2 seconds to transfer the
call to your mobile phone.
From Mobile Phone to Headset: During a call, press and hold “MFB” for 2 seconds to transfer the
call to your headset.
● To Mute & Unmute during a conversaon:
Mute the microphone: Press and hold the “Next” buon unl you hear a short beep. In mute status,
you will hear two short beeps every 3 seconds.
Unmute the microphone: Press and hold the “Next” buon again unl you hear a further short
beep.
To Restore Default Sengs: In standby mode (just turn it on), press and hold “Next” buon for 8
seconds unl the indicator ashes blue and red. The headphone has now been reset to its original
sengs. Aer being powered on again, it will enter pairing mode automacally.
5.3 Music Streaming
Please acvate your phone’s music player before listening to music on the headset. For some
phones, music will automacally be heard on your headset, other phones you will need to manually
transfer music from your phone to the headset.
Volume Up: Press and hold the Volume +” buon, or for small incremental increases, short
press the “Volume +” buon.
Volume Down: Press and hold the Volume buon, or for small incremental decreases, short -
press “Volume “ buon.-
To Play Music : Press the “MFB” buon.
Pause : Press the “MFB” buon again.
Previous Track : Press the “Previous” buon.
Next Track: Press the “Next” buon.


Produkt Specifikationer

Mærke: Avantree
Kategori: Øreprop
Model: Jogger Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Avantree Jogger Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig