AVPro Edge AC-MXNET-10G-SW12C Manual

AVPro Edge Netværkskort/adapter AC-MXNET-10G-SW12C

Læs gratis den danske manual til AVPro Edge AC-MXNET-10G-SW12C (8 sider) i kategorien Netværkskort/adapter. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om AVPro Edge AC-MXNET-10G-SW12C, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Page 1 8 of
MXNET 10G SDVoE
®
Quick Start Guide
T he MXNet 10G SDVoE
®
Ecosystem
QUICK START GUIDE
The MXNet 10G SDVoE
®
Ecosystem is an AV- -over IP platform of products developed and designed by
AVPro Edge. This system is an ultra-low latency HDMI 2.0, 4K 60Hz 4:4:4 video, multichannel audio, and
control signal distribution system over 10G Ethernet infrastructure, based on SDVoE
®
standards and
Semtech
®
ASIC technologies. -Crystal clear 4K video is provided along with versatile AV and control signal
distribution applications.
The diagram below shows the basic application with the AC-MXNET- - -10G SW12C managed switch, AC
MXNET- -10G TCVR transceivers, and AC- -MXNET 10G-CBOX control box. The cable connections can be
Category cable, optical fiber, or a combination of both , as shown below.
If using a party network switch with MXNet, please review our Knowledge Base a third- first rticle here.
Page 2 8 of
MXNET 10G SDVoE
®
Quick Start Guide
1. Select the Transceiver Mode
The encoder and decoder (transmitter/receiver) are combined into one chassis with a simple toggle
switch to select application functionality. By default, the transceiver is set to d ecoder mode.
Flip the ENC/DEC SELECT toggle switch t e dto set the ransceiver to ncoder or ecoder mode.
AC- -10G-MXNET TCVR
( Front Panel)
To the right of the toggle switch is a blue LED that indicates the selected mode:
LED is on = Encoder mode
LED is off = Decoder mode
2. Select the Transceiver Port Type
10GbE copper and fiber ports on each t ransceiver allow flexibility to utilize the cabling that best fits
the specific installation.
For Category Cable Connections
Flip the SDVoE SELECT toggle switch to the 10G BASE-T setting, then flip the POE SELECT toggle
switch to the 10G setting.
AC TCVR- -10G-MXNET
(Rear Panel)
Connect the SDVoE 10G BASE- T port on the transceiver to a 10G Copper PoE port on the network
s . witch
Connect the power supply to the network switch. By using this method, no additional cabling is
required to power the transceiver etwork as it will be powered by the n s - -witch via PoE (Power over
Ethernet).
The
AC- - -MXNET 10G TCVR
is shown, but the
same steps apply
to all transceivers:
AC- - - - MXNET 10G TCVR AVDM
AC- - - - MXNET 10G TCVR USBX
AC- - - -MXNET 10G TCVR PRO

Produkt Specifikationer

Mærke: AVPro Edge
Kategori: Netværkskort/adapter
Model: AC-MXNET-10G-SW12C

Har du brug for hjælp?

Hvis du har brug for hjælp til AVPro Edge AC-MXNET-10G-SW12C stil et spørgsmål nedenfor, og andre brugere vil svare dig


Netværkskort/adapter AVPro Edge Manualer

AVPro Edge

AVPro Edge MXNet AC-MXNET-SW10 Manual

6 Juli 2025
AVPro Edge

AVPro Edge AC-MXNET-10G-SW12C Manual

6 Juli 2025
AVPro Edge

AVPro Edge AC-MXNET-10G-TCVR Manual

2 April 2025

Netværkskort/adapter Manualer

Nyeste Netværkskort/adapter Manualer

Cisco

Cisco CBS220-24FP-4X Manual

6 Juli 2025
Black Box

Black Box EMS10G12 Manual

6 Juli 2025
Vigitron

Vigitron MaxiiNet Vi32026 Manual

6 Juli 2025
I-Tec

I-Tec U3METALG3HUB Manual

6 Juli 2025
Cisco

Cisco CBS220-24FP-4G Manual

6 Juli 2025
Cisco

Cisco CBS220-48P-4X Manual

6 Juli 2025
Cisco

Cisco CBS220-48FP-4X Manual

6 Juli 2025
Cisco

Cisco CBS220-8T-E-2G Manual

6 Juli 2025
Cisco

Cisco CBS220-8FP-E-2G Manual

6 Juli 2025
Cisco

Cisco CBS220-24T-4G Manual

6 Juli 2025