
AXDSPX-WR
INSTALLATION  INSTRUCTIONS
AxxessInterfaces.com  © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION  REV. 7/30/20 INSTAXDSPX-WR
Google Play Store
Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun, 
  solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Preface ....................................................................2
Installation Options ...............................................2
Installation .............................................................3
Connections
- Aftermarket radio system ..................................4
- Adding a subwoofer to an existing radio .........5
- Full range system to an existing radio ..............6
AXDSP-X app ..................................................... 7-16
Pinout ....................................................................17
Specifications ........................................................18
Axxess 10-Channel Digital Signal Processor 
with Water Resistant Case
•  Water resistant enclosure with zip tie mounts included
•  31 Band graphic EQ
•  6 Inputs, 10 individually assignable outputs
•  Independent equalization on each of the 10 outputs
•  Independent high pass, low pass, and bandpass filters
•  Each channel can be delayed independently up to 10ms
•  Easy behind the radio installation in most applications
•  Designed for motorcycle and UTV applications
•  Clipping detection and limiting circuits
•  Bass knob included
• 
Settings adjusted via Bluetooth® in a smart device application (tablet 
or mobile phone), compatible with both Android and Apple devices
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• Micro-B USB updatable
• AXDSP-X circuit board • AXDSPX-WR harness (with gaskets) 
• AXDSPX-WR enclosure (w/ case, cap,and O-ring)