AXESS AXUSB-CBL Manual


Læs gratis den danske manual til AXESS AXUSB-CBL (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om AXESS AXUSB-CBL, eller vil du spørge andre brugere om produktet?

Side 1/1
AXUSB-CBL
INSTALLATION INS TRUCTIONS
REV. 2/3/20
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
For installation and operation instructions. please go to:
www.axxessinterfaces.com
and click on the "Firmware Download" tab.
1. Download the webxxpress updater program from
2. Once downloaded double click the webxxpress program icon
located on your desktop and follow prompts.
For windows Vista users right click on icon and click “run as Note:
administrator”.
3. Once installed connect the AXUSB-CBL to your computer (sold
separately) and follow prompts to install drivers. (Note: not all
computers will need to do this).
4. Once drivers are installed open the USB bootloader program
which is located in the “all program” section of your start menu.
5. Open up the Axxess interface box that needs to be updated to
access the 4-pin serial port on the circuit board.
6. With the USB boot loader program opened, click “update unit
board”. When prompted, plug the AXUSB-CBL into the 4-pin serial
port of the Axxess interface and the board will begin to update to
the latest version.


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXUSB-CBL

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXUSB-CBL stil et spørgsmål nedenfor, og andre brugere vil svare dig