AXESS LOC-FDH3 Manual


Læs gratis den danske manual til AXESS LOC-FDH3 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om AXESS LOC-FDH3, eller vil du spørge andre brugere om produktet?

Side 1/4
MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/6/23 INSTAX-LOC
AX-LOC
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Things to Know 1 .......................................................
Connections
Adding a Subwoofer and Amplifier to Your
Factory system-Keeping Factory Speakers 2 ....
Adding a 4 Channel Amplifier-Entire System
Not Using Radio’s Output 3 .................................
Specifications 4 .........................................................
Please visit for the latest and up to date application information.AxxessInterfaces.com
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Things to Know
LOC T-harnesses are installed at the radio and designed for non-amplified vehicles. You can find dash
disassembly instructions from the on Vehicle Fit Guide AxxessInterfaces.com
It is recommended that a polarity tester and tone generator be used before connecting your
aftermarket equipment.
If your vehicle doesn’t have an accessory circuit your will not have an accessory ( ) LOC T-Harness Red
wire in the harness. Refer to the instructions for remote turn on options. Some vehicles AX-LOC
require the addition of load resistors, there are multiple options available. We recommend AX-LR20,
AX-LR39, and AX-LR60.
Proper termination of loose wires is required.


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: LOC-FDH3

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS LOC-FDH3 stil et spørgsmål nedenfor, og andre brugere vil svare dig