B-Tech BT7051 Manual

B-Tech Vægophæng BT7051

Læs gratis den danske manual til B-Tech BT7051 (2 sider) i kategorien Vægophæng. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 20 anmeldelser. Har du et spørgsmål om B-Tech BT7051, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

www.btechavmounts.com

v.0209 OR1BX

Asia Pacific

B-Tech International (Hong Kong) Ltd.

23rd Floor, Manulife Tower, North Point, HK

Tel: (+852) 2556 7337 Fax: (+852) 2556 7321

Email: info@btechavmounts.com.hk

Europe

B-Tech PRO-AV bvba

Brixtonlaan 32, Zaventem 1930,Brussels, Belgium

Tel: +32 (0)2 720 92 71 Fax: +32 (0)2 725 42 15

Email: info@btechproav.com

North America

B-Tech Audio Video Mounts.

10 Greg Street, #108, Sparks, NV 89431, USA

Tel: (1)800 975 5812 Fax: (1)800 592 2876

Email: info@btechavmounts.com

Head Oﬃce

B-Tech International Ltd.

Bennett House, Long March, Daventry, Northants NN11 4NR, UK

Tel: +44 (0)1327 300 787 Fax: +44 (0)1327 706 562

Email: info@btechavmounts.co.uk

PAGE 1 / 2

This pack contains:

1 heavy duty collar with covers Caution: Do not exceed the maximum weight limit indicated for this product.

Failure to comply may cause instability and possible serious injury.

Made in China

• Heavy duty accessory collar for use with 50mm (2”) poles

• Provides attachment for B-Tech modulus system mounts

• Double attachment

• Aesthetic cover plates included to hide fasteners

O52

Important Safety Instructions.

Read first

Do not attempt to install this product until all instructions and warnings have been read and

properly understood. Please keep these instructions for future reference.

B-Tech International Limited, its distributors and dealers are not liable or responsible for

damage or injury caused by improper installation, improper use or failure to observe these

safety instructions. In such cases, all guarantees will expire.

General

B-Tech International Ltd recommends that a professional AV installer or other suitably qualified

person install this product. Great care must always be taken during installation as most AV

equipment is of a fragile nature, possibly heavy and easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely,

then please consult a professional for advice and/or to install this product for you. Failure to

mount this product correctly may cause serious injury or death both during installation and at

any time thereafter.

Do not mount any AV equipment that exceeds the specific weight limit of the product you are

installing. This weight limit will be clearly stated on each product and its packaging and will

vary from product to product.

Product location

Please pay careful attention to where this product is located.

If located in a public or frequently populated area ensure that the product is out of the

immediate reach of people. If any AV equipment is to be suspended over the likely path or

location of people then great care should be taken to secure all parts of the installation from

falling.

Fixing hardware

It is highly recommended that all fixing screws be used where supplied and that the purpose of

all other fixing hardware is fully understood.

The installer must be satisfied that any supplied fixing hardware is suitable for each specific

installation. If any fixing screws or included hardware are deemed not sufficient for a safe

installation then please consult a professional or your local hardware store.

Hazard limitation

Some products have moving parts and the potential to cause injury through the crushing or

trapping of fingers or other body parts.

Particular attention to the nature of moving parts is required especially when assembling

installing and adjusting during set up.

Immediately after installations double-check that the work done is safe and secure. Double-

check all necessary fixings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its fixing points are made as

frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV

installer or other suitably qualified person.

This collar is intended for use only with the maximum

weights indicated. Use with heavier than the maximum

indicated may result in instability causing possible injury.

PART NAME DESCRIPTION QTY

1 BT7051 COLLAR

TO FIT 50mm POLES

2 M8 X 15mm GRUB SCREWS

TO CLAMP COLLAR TO POLE

3 M8 SPRING WASHER

SITS UNDER SCREW HEADS 9

4 M8 X 12mm FLAT CROSS HEAD

SCREW

TO ATTACH ACCESSORIES

5 M8 X 65mm SAFETY BOLT

PASSES THROUGH POLE

6 BT7051 COLLAR COVER HALF PUSH FIT AROUND COLLAR 2

7 4mm ALLEN KEY

TO TIGHTEN (PART 2)

8 5mm ALLEN KEY

TO TIGHTEN (PART 5)

Attention!

Ensure safety bolt (Part 5)

is in place before any AV

equipment is fitted.

Spare screws and

washers are provided

for use on the other

side of the collar if two

accessories need to

be attached.

Covers cannot be

used in this situation.

v.0209 OR1BX

PAGE 2 / 2

Produkt Specifikationer

Mærke:	B-Tech
Kategori:	Vægophæng
Model:	BT7051
Bredde:	84 mm
Dybde:	68 mm
Højde:	51 mm
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Produkttype:	Krave
Harmoniseret systemkode (HS):	83024200