B-Tech BT8577 Manual

B-Tech Vægophæng BT8577

Læs gratis den danske manual til B-Tech BT8577 (16 sider) i kategorien Vægophæng. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om B-Tech BT8577, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

BT8577

Bolt-Down Pole Mounted Digital Signage Stand

With Retractable Base

Installation Guide

www.btechavmounts.com

■ Sliding ﬂoor base, retracts the display stand backwards

- Ideal for shop fronts, close-to-the-window installations

■ Recommended for screens up to: 75" (190cm)

■ Max load: 40kg (88lbs)

■ Suitable for displays with VESA®

& non-VESA ﬁxings

up to 600 x 400mm

■ Universal design suitable for displaying screens in a

landscape or portrait orientation

■ Base dimensions: 262mm (10") 420-826mm (17" - 33")W. D.

■ Max. distance from the ﬂoor to centre of the screen:

1630mm (64")

Recommended

Max Screen Max

Load Max

VESA Post Install

Alignment

600

400

190cm

75"40kg

[88lbs]

Installation Safety Notes 2

Parts List 4

Installation Instructions 6

Product Dimensions 14

B-Tech Contact Details 16

Installation Safety Instructions

Contents Pg

Caution: This mount is intended for use only with the

maximum weights indicated. Use with equipment heavier than the

maximum indicated may result in instability causing possible injury.

Do not attempt to install this product until all instructions and warnings have been read and properly understood.

Please keep these instructions for future reference.

Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.

B-Tech AV Mounts, its distributors and dealers are not liable or responsible for damage or injury caused by improper

installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.

General

B-Tech AV Mounts recommends that a professional AV installer or other suitably qualif ied person install this product.

Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and easily

damaged if dropped. If you do not fully understand the instructions or are not sure how to install this product safely, then

please consult a professional for advice and/or to install this product for you. Failure to mount this product correctly may

cause serious injury or death both during installation and at any time thereafter. Do not mount any AV equipment that

exceeds the speciﬁc weight limit of the product you are installing. This weight limit will be clearly stated on each product

and its packaging and will vary from product to product.

Product location

Please pay careful attention to where this product is located, some locations are not suitable for installation. For indoor

use only. Install stand on level ground. When verifying the stability of the structure, consider the following external factors:

The strength of the ﬂoor, exposure to sudden and severe wind and danger arising from contact with people and / or ob-

jects (eg installations in passageways, emergency exits), if located in a public or frequently populated area ensurethat the

product is out of the immediate reach of people.

Fixing hardware

It is highly recommended that all ﬁxing screws be used where supplied and that the purpose of all other ﬁxing hardware

is fully understood. In some cases more AV equipment ﬁxing hardware will be supplied to accommodate different models

of equipment and set up conﬁgurations. The installer must be satisﬁed that any supplied ﬁxing hardware is suitable for

each speciﬁc installation. The ﬁxing kit supplied with the product may not be suitable for all walls. If any ﬁxing screws or

included hardware are deemed not sufficient for a safe installation then please consult a professional or your local

hardware store.

Hazard limitation

When routing cables take advantage of any built in cable management features that the product might provide and ensure

that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling.

Some products have moving parts and the potential to cause injury through the crushing or trapping of ﬁngers or other

body parts. Particular attention to the nature of moving parts is required especially when assembling installing and

adjusting during set up. Immediately after installation double-check that the work done is safe and secure. Double-check

all necessary ﬁxings are present and are of ample tightness. It is recommended that periodic inspections of the product

and its ﬁxing points are made as frequently as possible (no more than 6 months apart) to ensure that safety is maintained.

If in doubt consult a professional AV installer or other suitably qualiﬁed person.

BT8577

Produkt Specifikationer

Mærke:	B-Tech
Kategori:	Vægophæng
Model:	BT8577

Har du brug for hjælp?

Hvis du har brug for hjælp til B-Tech BT8577 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vægophæng B-Tech Manualer

B-Tech BT8577 Manual

20 Januar 2025

B-Tech BT9340-FM Manual

14 Januar 2025

22 September 2024

7 August 2024

7 August 2024

7 August 2024

7 August 2024

7 August 2024

7 August 2024

7 August 2024

Vægophæng Manualer

Nyeste Vægophæng Manualer

Techly ICA-LCD 323S Manual

10 Juni 2025

Techly ICA-LCD 402 Manual

10 Juni 2025

Deltaco ARM-0265 Manual

10 Juni 2025

Techly ICA-LCD 2903 Manual

9 Juni 2025

Techly ICA-PLB 162M Manual

9 Juni 2025

Deltaco ARM-0452 Manual

9 Juni 2025

Techly ICA-TR13 Manual

9 Juni 2025

Techly ICA-PLB 114M Manual

9 Juni 2025

Gembird TVS-65S-02 Manual

9 Juni 2025

Techly ICA-TR10 Manual

8 Juni 2025