Bauhn ADMWC-0224 Manual

Bauhn Oplader til mobilenhed ADMWC-0224

Læs gratis den danske manual til Bauhn ADMWC-0224 (2 sider) i kategorien Oplader til mobilenhed. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Bauhn ADMWC-0224, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Cannot charge

smart phone

• Check that your smart phone supports wireless charging.

• If you have a smart phone case, you must remove it when

charging.

• Ensure the smart phone is facing up, making sure the centre of

the smart phone is aligned to the centre of the charging pad.

• Check and remove any metal or other objects between the

smart phone and the charging pad.

• Note: If the wireless charging pad encounters interference as

mentioned above it will enter protection mode and the LED will

ash green.

Cannot

charge

Earbuds

case

• Check that your earbuds case supports wireless charging.

• Ensure the earbuds case is facing up, making sure the centre of

the case is aligned to the centre of the charging pad.

• Check and remove any metal or other objects between the case

and the charging pad.

Note: If the wireless charging pad encounters interference as

mentioned above it will enter protection mode and the LED will

ash green.

LED

indicator

light does

not light up

• Ensure that the USB-C cable is connected to the USB-C port

securely.

• Check that the power source is switched on.

• Ensure that the power supply voltage is in the correct range.

Product Overview

Have you got everything?

Operation

A. Desktop Mat

B. Wireless Charging Pad

C. USB-C Cable

D. User Guide

E. Warranty Certicate

Connect to a power source

• Use the supplied USB cable and connect to the

USB-C port on the product and the other end to

a power source. The LED indicator will light up

white.

Charging smart phone and/or earbuds

• Ensuring the wireless charging pad is connected

to a power source with the supplied USB-C cable,

place your smart phone face up on the smart

phone charging pad and put earbuds on the

earbuds charging pad.

• The LED indicator will light up green when

charging either the smart phone and/or

earbuds.

Note: Your smart phone and earbuds must support

wireless charging.

Detaching charging pad or changing sides

• Your wireless desktop charging mat can be

aligned left or right.

• To change which side the wireless charging

pad sits on, please detach it, then rotate the

desktop mat 180°.

• Now you can reconnect the wireless charging

pad to the desktop mat.

A. USB-C port

B. LED indicator light

C. Earbuds charging pad

D. Smart phone charging pad

E. Detachable charging pad

Give us a call

What? You mean this User Guide didn’t have ALL the answers? Speak to us!

We’d love to help you get up and running as quickly as possible.

Call our on . After Sales Support 1300 002 534

Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST

Enjoy using your product!

Well done, you made it.

Now sit back and relax... your product is

automatically covered by a 1-year warranty.

How nice!

Troubleshooting

User Guide

Model: ADMWC-0224

Wireless Desktop Charging Mat

GENERAL SAFETY WARNINGS

Specications

General Safety Warnings

For the safety of yourself and others, follow all instructions and take notice of all the

warnings. When adhered to, these safety precautions can reduce the risk of fire, electric

shock and injury.

This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the

safety of the product.

The RCM is a visible indication of a product’s compliance with all

applicable ACMA regulatory arrangements, including all technical and

record-keeping requirements.

IMPORTANT

Plastic wrapping can be a suffocation

hazard for babies and young children, so

ensure all packaging Paderials are out of

their reach.

To prevent environmental factors

(dampness, dust, food, liquid etc.)

harming the power bank, only use

it in a well-ventilated, clean and dry

environment, away from excessive heat or

moisture.

Keep the product away from direct

sunlight or heat sources.

In case of damage, do not disassemble,

repair or modify the product yourself.

Contact After Sales Support for advice on

repair or replacement, or refer servicing to

qualified personnel only. Children should

be supervised to ensure they do not play

with the product.

Do not place or store appliance where it

can fall or be pulled into a bath or sink.

This product is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the product

by a person responsible for their safety.

Do not expose the product to

microwaves.

Clean using a dry cloth only - do not use

water or chemicals.

Keep the product away from oils,

chemicals or any other organic liquids.

Use this product only for its intended

purpose as described in this guide.

Responsible disposal of the packaging

The packaging of your product has been

selected from environmentally friendly

Paderials and can usually be recycled.

Please ensure these are disposed of

correctly. Plastic wrapping can be a

suffocation hazard for babies and young

children, please ensure all packaging

Paderials are out of reach and are safely

disposed of. Please recycle these Paderials

rather than throwing them away.

Responsible disposal of the product

At the end of its working life, do

not throw this product out with your

household rubbish. An environmentally

friendly method of disposal will ensure

that valuable raw Paderials can be

recycled. Electrical and electronic items

contain Paderials and substances which,

if handled or disposed of incorrectly,

could potentially be hazardous to the

environment and human health.

Output:

Magnetic Wireless Output for Smart Phone: 5W, 7.5W, 10W,

15W

Wireless Output for Earbuds: 5W Max.

Total Output: 15W Max.

USB-C Input: 5V 3A, 9V 3A⎓ ⎓

Dimensions: 780 x 370 x 9.7mm (when laid out at)

Weight 560g

* Output is dependent on input power

** Only supported on some devices compatible with 15W wireless charging.

Produkt Specifikationer

Mærke:	Bauhn
Kategori:	Oplader til mobilenhed
Model:	ADMWC-0224

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauhn ADMWC-0224 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Oplader til mobilenhed Bauhn Manualer

Bauhn ACRWC-0424-M Manual

15 Oktober 2024

Bauhn AFTC3-0424-W Manual

15 Oktober 2024

Bauhn AFTC3-0424-B Manual

15 Oktober 2024

Bauhn ACRWC-0424-W Manual

15 Oktober 2024

Bauhn ADMWC-0224 Manual

15 Oktober 2024

Bauhn ABP27K-0724 Manual

5 September 2024

Oplader til mobilenhed Manualer

Nyeste Oplader til mobilenhed Manualer

Insignia NS-PW370C2W25 Manual

26 Februar 2025

Ikea SITTBRUNN 805.394.83 Manual

13 Februar 2025

Ikea LILLHULT 805.812.93 Manual

13 Februar 2025

Ikea LILLHULT 205.811.11 Manual

13 Februar 2025

Ikea LILLHULT 405.810.92 Manual

13 Februar 2025

Ikea SITTBRUNN 905.876.85 Manual

13 Februar 2025

Ikea LILLHULT 005.811.12 Manual

13 Februar 2025

Ikea LILLHULT 605.275.94 Manual

13 Februar 2025

Ikea SMÅHAGEL 905.406.45 Manual

16 Januar 2025

Ikea SJÖSS 705.744.67 Manual

16 Januar 2025