Bauhn ACRWC-0424-M Manual

Bauhn Oplader til mobilenhed ACRWC-0424-M

Læs gratis den danske manual til Bauhn ACRWC-0424-M (2 sider) i kategorien Oplader til mobilenhed. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Bauhn ACRWC-0424-M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1. : press to turn the light on/off and adjust the

brightness

2. DC PORT (rear of product) : plug in the supplied

power adaptor to the DC port and the other end

to a power socket with a power source to power

on the unit

3. LCD DISPLAY SCREEN

4. Backup Battery (underside of product) : use a

screwdriver to remove the screw and insert a

CR2032 battery (not included)

5. 5W WIRELESS CHARGING LED INDICATOR

6. 5W WIRELESS CHARGING PAD

7. FM ANTENNA

8. TEMPERATURE SENSOR

9. 10W WIRELESS CHARGING LED INDICATOR

10. 10W WIRELESS CHARGING PAD

Have you got everything?

Operation

Product Overview

User Guide

Model: ACRWC-0424-W, ACRWC-0424-M

Clock Radio With Dual Wireless Charging

Unpack the box (be gentle) and make sure all of these items are there:

A. Clock Radio With Dual Wireless Charging

B. Power Adaptor

Connect the supplied power adaptor to the DC port on the unit and the other end to a power socket with a

power source. The LCD display screen will light up and a beep sound will be heard.

To set the time, press and hold the button. The hour on the LCD display screen will ash. Use the Settings

button to set the hour. Press the button again and the minutes on the LCD display screen will ash. Use the

Settings button to set the minutes. Press the button again and the year on the LCD display screen will ash.

Use the Settings button to set the year. Press the button again and the month on the LCD display screen

will ash. Use the Settings button to set the month. Press the button again and the day on the LCD display

screen will ash. Use the Settings button to set the day. Press the button again to save the above settings

(the setting will automatically exit after 1 minute of no operation). Once set, press the button to switch

between 12 hour/24hour display mode.

To set the 1st alarm, press the button to enter alarm mode. Press and hold the button and the hour on

the LCD display screen will ash. Use the Settings button to set the hour. Press the button again and the

minutes on the LCD display screen will ash. Use the Settings buttons to set the minutes. Press the button to

store the alarm setting (the alarm setting will automatically exit after 1 minute of no operation).

Press the button to display the 1st alarm. The icon on the LCD display screen will ash. Use the Settings

button to turn the alarm on and the icon will light up solid.

Press the button to display the 2nd alarm. The icon on the LCD display screen will ash. Use the Settings

button to turn the alarm on and the icon will light up solid.

Press the button to save the settings and go back to clock mode.

To set the 2nd alarm, repeat the above steps.

When an alarm rings, press the SNOOZE button to enter snooze mode. Press the SNOOZE button again to

cancel snooze. When an alarm rings, press any of the / Settings buttons to turn off the alarm. The / /

alarm will automatically stop ringing after 10 minutes of no operation.

Press the button repeatedly to adjust the brightness of the LCD display screen (high/medium/low/off).

FM Operation:

Press the button to enter FM radio mode.

Use the Volume control button to decrease/increase the volume.

Use the Settings button to switch between the previous and next radio station.

Press the button again to switch back to clock mode.

Setting Preset Stations:

Press the button to show the frequency.

Press and hold the Settings buttons to the right to scan the available radio stations.

Press and hold the button to store the radio station (up to 8 stations can be stored).

Use the Settings button to switch between previous and next radio station.

To use the dual wireless chargers, place your smart phone facing up on the 5W/10W wireless charging pads.

The 5W/10W wireless charging LED indicator will light up red when charging. If the smart phone doesn’t start

charging, adjust the position and/or remove your smart phone case. Also ensure that there are no metal or

other objects between the smart phone and the wireless charging pad.

Notes:

The wireless charging function works only on wireless charging compatible smart phones.

Note: this unit uses a button or coin cell battery (not included) as a backup system. Using a screwdriver, remove

the battery compartment cover on the underside of the unit and insert the battery, ensuring the positive (+) is

facing up.

When replacing the battery, do not disconnect the power adaptor otherwise the clock/alarm settings/preset

stations will be lost.

C. User Guide

D. Warranty Certicate

Your new product is ready to enjoy!

Well done, you made it.

Now sit back and relax... your new product is automatically covered

by a 1-year warranty. How nice!

11. Volume control : scroll left to decrease volume

level. Scroll right to increase volume level

12. : enter alarm settings

13. : enter clock settings

14. SNOOZE: press to enter snooze mode.

15. : press to adjust the LCD display screen

brightness

16. : press to enter FM radio mode

17. Settings button : press left or right to set time/

day/month/year/alarm time/play previous or

next FM station.

Top base

Bottom base

12 14 15 16

GENERAL SAFETY WARNINGS

General Safety Warnings

For the safety of yourself and others, follow all instructions and take notice of all the warnings. When

adhered to, these safety precautions can reduce the risk of fire, electric shock and injury.

This product complies with Australian Safety standard AS/NZS 62368.1 to ensure the safety of the

product.

The RCM is a visible indication of a product’s compliance with all applicable ACMA

regulatory arrangements, including all technical and record-keeping requirements.

Power adaptor input AC 100-240V, 50/60Hz 0.8A Max.

Power adaptor output 12VDC, 2.5A

Radio frequency range 87-108MHz

Power consumption 30W

Top base wireless charging 5W

Bottom base wireless charging 10W

Dimensions (W x H x D) 225 x 191 x 111 mm

Weight 850g (approx.)

Troubleshooting

Wireless chargers not

working

• Check that your smart phone supports wireless charging.

• Adjust the position of your smart phone to the centre of the

wireless charging pad.

• Remove the smart phone case.

• Check and remove any metal or other objects between the

mobile phone and wireless charging pad (the LED indicator

will ash red).

LCD display screen not

showing

• Check that the power adaptor is plugged into the DC port

and the other end to a power socket with a power source.

• Press the button to check whether the screen is on lowest

brightness setting.

Specications

IMPORTANT

Plastic wrapping can be a suffocation hazard for

babies and young children, so ensure all packaging

materials are out of their reach.

To prevent environmental factors (dampness, dust,

food, liquid etc.) harming the product, only use it in a

well-ventilated, clean and dry environment, away from

excessive heat or moisture.

Keep the product away from direct sunlight or heat

sources.

In case of damage, do not disassemble, repair or

modify the product yourself. Contact After Sales

Support for advice on repair or replacement, or refer

servicing to qualified personnel only.

This product is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the product by a

person responsible for their safety.

Children should be supervised to ensure they do not

play with the product.

This product is not suitable for use in locations where

children are likely to be present.

Do not put any object on top of the product

Do not place or store appliance where it can fall or be

pulled into a bath or sink.

Do not place the product into water or any other

liquids.

Do not expose the product to microwaves.

Do not place speakers too close to ears. Damage may

occur to ear drums, especially in young children.

Do not dispose the battery into a fire or hot oven,

and mechanically crush or cut the battery as this can

lead to an explosion.

Do not place the product in a high temperature

surrounding environment that can that can result in

an explosion or the leakage of flammable liquid/gas.

Do not use the product at a low air pressure

environment at high altitude as battery subjected

to low air pressure can result in an explosion or the

leakage of flammable liquid/gas.

Clean using a dry cloth only - do not use water or

chemicals.

Keep the product away from oils, chemicals or any

other organic liquids.

Use this appliance only for its intended purpose as

described in this guide.

Responsible disposal of the packaging

The packaging of your product has been selected

from environmentally friendly materials and can

usually be recycled. Please ensure these are disposed

of correctly. Plastic wrapping can be a suffocation

hazard for babies and young children, please ensure

all packaging materials are out of reach and are safely

disposed of. Please recycle these materials rather

than throwing them away.

Responsible disposal of the product

At the end of its working life, do not throw this

product out with your household rubbish. An

environmentally friendly method of disposal will

ensure that valuable raw materials can be recycled.

Electrical and electronic items contain materials

and substances which, if handled or disposed of

incorrectly, could potentially be hazardous to the

environment and human health.

Give us a call

What? You mean this User Guide didn’t have ALL the answers? Speak to us!

We’d love to help you get up and running as quickly as possible.

Call our on . After Sales Support 1300 002 534

Operating hours: Monday-Friday, 8:30am-6pm; Saturday, 9am-6pm AEST

WARNING: Uses button

or coin cell battery as

backup (not included).

Hazardous if swallowed.

WARNING!

This product contains a coin/button cell battery

This product has been designed so that the coin/button cell

battery is not accessible to young children, as the battery

compartment cover is secured with a screw or mechanical

fastener. Always ensure that the compartment is secured

before use.

If swallowed, immediately call the 24-hour Poisions

Information Centre on 13 11 26 for fast expert advice.

Dispose of used batteries immediately.

KEEP BATTERIES OUT OF REACH OF CHILDREN.

Swallowing may lead to serious injury or death in

as little as 2 hours due to internal burns.

Batteries must not be exposed to

sources of excessive heat such as

direct sunlight.

WARNING

WARNING!

Produkt Specifikationer

Mærke:	Bauhn
Kategori:	Oplader til mobilenhed
Model:	ACRWC-0424-M

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauhn ACRWC-0424-M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Oplader til mobilenhed Bauhn Manualer

Bauhn ACRWC-0424-M Manual

15 Oktober 2024

Bauhn AFTC3-0424-W Manual

15 Oktober 2024

Bauhn AFTC3-0424-B Manual

15 Oktober 2024

Bauhn ACRWC-0424-W Manual

15 Oktober 2024

Bauhn ADMWC-0224 Manual

15 Oktober 2024

Bauhn ABP27K-0724 Manual

5 September 2024

Oplader til mobilenhed Manualer

Nyeste Oplader til mobilenhed Manualer

Leba NoteBox 16 Manual

1 April 2025

MOOOV 733405 Manual

14 Marts 2025

MOOOV 732741 Manual

14 Marts 2025

Sitecom CH-1104 Manual

11 Marts 2025

Sitecom CH-1102 Manual

11 Marts 2025

Conceptronic ALTHEA22W100 Manual

10 Marts 2025

Conceptronic ALTHEA21W65 Manual

10 Marts 2025

Insignia NS-PW370C2W25 Manual

26 Februar 2025

Xuma UCAC-448U Manual

20 Februar 2025

Act AC2005 Manual

20 Februar 2025