Bauknecht BK41C11BS7LA0 Manual

Bauknecht Opvaskemaskine BK41C11BS7LA0

Læs gratis den danske manual til Bauknecht BK41C11BS7LA0 (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Bauknecht BK41C11BS7LA0, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENQuick Guide

1. ON-OFF/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

PLEASE SCAN THE

QR CODE ON YOUR

APPLIANCE IN

ORDER TO HAVE

MORE DETAILED

INFORMATION

Before using the appliance carefully read Safety and Installation Instructions.

After installation, please remember to remove all transport protection parts from

the dishwasher.

Program

Programs description

Drying

phase

ActiveDry

Available

options

Duration

of wash

program

(h:min)

**)

Water

consumption

(litres/cycle)

Energy

consumption

(kWh/cycle)

Eco 50°- Program is suitable to clean normally soiled tableware, that for

this use, it is the most ecient programme in terms of its combined en-

ergy and water consumption, and that it is used to assess compliance

with the EU Ecodesign legislation.

3:35 8.7 0.63

Intensive 65° - Program recommended for heavily soiled crockery, es-

pecially suitable for pans and saucepans.

2:45 17.5 1.60

Sensor 50-60°- For normally soiled dishes with dried food residues.

Senses the level of soiling on the dishes and adjusts the program ac-

cordingly.

1:20 - 3:00 7.0 - 14.0 0.70 - 1.10

Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that en-

sures optimal cleaning and drying performance in shorter time.

1.25 11.5 1.10

Half Load 55° - Ideal for washing a half load of lightly or normally soiled

crockery.

1:20 11.0 1.00

Rapid 30’ - 45° Program to be used for half load of lightly-soiled dishes

with no dried food residues. Without drying.

0:30 9.0 0.50

Silent 50° - Suitable for night-time operation of the appliance. With the

lowest noise.

3:30 16.0 1.15

Sanitizing - 65° Normally or heavily soiled crockery, with additional

antibacterial wash. Can be used to perform maintenance of the dish-

washer.

1.50 12.0 1.30

Prewash - Use to refresh crockery planned to be washed later.

No detergent to be used with this program.

- -

0:10 4.5 0.01

1 2 3 4 5 6 7 8 9 10 11

7. Display

8. Multizone indicator light

9. Multizone

button

10. Delay button

11. START/Pause button with

indicator light / Tablet (Tab)

CONTROL PANEL

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and on

the machine’s functional components.

• It is mandatory that the salt reservoir never be empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher and must be

lled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap

(anticlockwise).

2. Only the rst time you do this: ll the salt reservoir

with water.

3. Position the funnel and ll the salt reservoir (see gure)

right up to its edge (approximately 1 kg); it is not unu-

sual for a little water to leak out.

4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get into

the container during the wash program (this could damage the water sof-

tener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently prevent-

ing scale buildup on heater, contributing also to better cleaning eciency.

This system regenerates itself with salt, therefore it is required to rell

salt container when empty.

Frequency of regeneration depends on water hardness level setting - regen-

eration takes place once per Eco cycles with water hardness level set to . 6 3

Regeneration process starts in nal rinse and nishes in drying phase, be-

fore cycle ends.

• Single regeneration consumes: ~3.5L of water;

• Takes up to 5 additional minutes for the cycle;

• Consumes below 0.005kWh of energy.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid

dispenser A should be lled when the RINSE AID

REFILL indicator light in the control panel is lit.

NEVER pour the rinse aid directly into the appli-

ance tub.

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device . Introduce the C

detergent into the dry dispenser only. Place the amount of detergent for D

pre-washing directly inside the tub. If all-in-one detergents are used, we

recommend using the TABLET button, because it adjusts the program so

that the best washing and drying results are always achieved.

Usage of detergent not designed for dishwashers may cause malfunc-

tion or damage to the appliance.

FIRST TIME USE

More information in the Daily Reference Guide on website.

PROGRAMS TABLE

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance, please

Quick Guide

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.

Note for Test Laboratories: For information on

comparative EN testing conditions, please send an email to the following address:

dw_test_support@europeanappliances.com

Pre-treatment of the dishes is not needed before any of the programs.

*) Not all options can be used simultaneously.

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-

bration. The sensor calibration can increase program duration up to 20 min.

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected

program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.

DELAY - The start time of the program may be delayed for a period of

time between and hours.1 12

The DELAY function cannot be set once a wash cycle has been started.

MULTIZONE - If there are not many dishes to be washed, a half load-

ing may be used in order to save water, electricity and detergent.

By default the appliance washes dishes in all racks.

TABLET (Tab)- If you use powder or liquid detergent, this option

should be o.

OPTIONS AND FUNCTIONS

Please scan on your product in order to have more detailed information.the QR code

ActiveDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying per-

formance every day. Door opens at the temperature that is safe to your

kitchen furniture.

CUTLERY RACK

(loading

example for the

cutlery rack)

The third rack was designed

to house the cutlery.

UPPER RACK

(loading

example for the

upper rack)

Load delicate and light dishes: glasses, cups, saucers, low

salad bowls.

The upper rack has tip-up supports which can be used in a

vertical position when arranging tea/ dessert saucers or in

a lower position to load bowls and food containers.

FOLDABLE FLAPS

WITH ADJUSTABLE

POSITION

LOWER RACK

(loading

example for the

lower rack)

For pots, lids, plates, salad bowls, cutlery etc. Large plates

and lids should ideally be placed at the sides to avoid

interferences with the spray arm.

The lower rack has tip-up supports which can be used in a

vertical position when arranging plates or in a horizontal

position (lower) to load pans and salad bowls easily.

LOADING THE RACKS

CAPACITY: 11 standard place-settings

CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS

1 2 3

In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)

please remove them carefully.

NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

To remove the upper spray arm,

turn the plastic locking ring in

aclockwise direction.

The lower spray arm may

be removed by pulling it

upwards.

CARE AND MAINTENANCE

More information in the Daily Reference Guide on website.

OPERATION INDICATOR -

A LED light projected on the oor indicates

that the dishwasher is working.

One of the following operating modes can be selected:

a) Disabled function.

b) When the cycle starts the light goes on for few seconds, stays o during

the cycle and ashes at the end of the cycle.

c) The light stays on during the cycle and ashes at the end of the cycle

(default mode).

CUTLERY BASKET

The basket is equipped with top grilles for improved cutlery

arrangement. The cutlery basket should be positioned only

at the front of the lower rack.

Knives and other utensils with sharp edges must be

placed in the cutlery basket with the points facing

downwards or they must be positioned horizontally

in the tip-up compartments on the upper rack.

Produkt Specifikationer

Mærke:	Bauknecht
Kategori:	Opvaskemaskine
Model:	BK41C11BS7LA0

Har du brug for hjælp?

Hvis du har brug for hjælp til Bauknecht BK41C11BS7LA0 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine Bauknecht Manualer

Bauknecht B7F HS51 X Manual

3 August 2025

Bauknecht BK6IC11BS7LSA0CH Manual

15 Juli 2025

Bauknecht BK8IA15AM3TUSC0CH Manual

15 Juli 2025

Bauknecht BK4PC11BS7A0 Manual

29 Juni 2025

Bauknecht BK41C11BS7LA0 Manual

29 Juni 2025

Bauknecht OBFC Ecosilent 9760 Manual

28 Juni 2025

Bauknecht OBIC Ecosilent 9760 Manual

28 Juni 2025

Bauknecht B8KI HP42 LCA Manual

27 Juni 2025

Bauknecht BK6IB10BS7LAO Manual

27 Juni 2025

Bauknecht BK6UB10BS7A0X Manual

26 Februar 2025

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Hisense HS642D90XUK Manual

14 August 2025

Hisense HFI663AXXL Manual

14 August 2025

Hoover HS 6B2S1PTA Manual

14 August 2025

Hisense HS622E90BUK Manual

14 August 2025

Hisense HS642D90WUK Manual

14 August 2025

Hisense HS693C60XAD Manual

14 August 2025

Hoover HS 6C3F0PS Manual

14 August 2025

Hoover HU 6C2F0PW-86 Manual

13 August 2025

Hoover HI 5B7F1S Manual

13 August 2025

Hoover HF 5B2S1PW-17 Manual

13 August 2025