BeamZ MHL1915 Manual

BeamZ Lys MHL1915

Læs gratis den danske manual til BeamZ MHL1915 (31 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om BeamZ MHL1915, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/31

MHL1915 LED Zoom 19x 15W

Ref. nr.: 150.522

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.4

ENGLISH

Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to benet

fully from all features.

Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid

re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock. Keep the

manual for future reference.

- Prior to using the product, please ask advice from a

specialist. When the unit is switched on for the rst time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do NOT

open the housing.

- Do not place metal objects or pour liquids into the product.

This may cause electrical shock and malfunctio n.

- Do not place the product near heat sources such as

radiators, etc. Do not place the unit on a vibrating surface.

Do not cover the ventilation holes.

- The product is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the product from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they need to

be replaced by a qualied technician.

- If the product is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the product on. Contact your dealer. Do

NOT connect the product to a rheostat or dimmer.

- To avoid re and shock hazard, do not expose the product

to rain and moisture.

- All repairs should be carried out by a qualied technician

only.

- Connect the product to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the product will not be used for a

longer period of time, unplug it from the mains. The rule is:

Unplug it from the mains when not in use.

- If the product has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on.

- Never use the product in humid rooms or outdoors.

- During operation, the housing becomes very hot. Do not

touch it during operation and immediately after.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Secure the product with an extra safety chain if the unit is

ceiling mount. Use a truss system with clamps. Make sure

nobody stands in the mounting area. Mount the eect at

least 50cm away from inammable material and leave at

least 1 meter space on every side to ensure sucient

cooling.

- This product contains high intensity LEDs. Do not look into

the LED light to prevent damage to your eyes.

- Do not repeatedly switch the product on and o. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave the

unit unattended.

- Do not use cleaning sprays to clean switches. The residues

of these sprays cause deposits of dust and grease. In case

of malfunction, always seek advice from a specialist.

- Only operate the product with clean hands.

- Do not force the controls.

- If the product has fallen, always have it checked by a

qualied technician before you switch the product on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the product with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the product o prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables prior to

moving the product.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use for

damages and faults!

- The mains voltage is 220-240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains voltage

of the country is suitable for this product.

- Keep the original packing material so that you can transport

the product in safe conditions

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read

and adhere to.

DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks

should be aware of the eects that this light eect may have on them.

The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.

Specications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also

invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the

warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

Produkt Specifikationer

Mærke:	BeamZ
Kategori:	Lys
Model:	MHL1915
Tænd-/slukkontakt:	Ja
Bredde:	380 mm
Dybde:	660 mm
Højde:	580 mm
Vægt:	34500 g
Produktfarve:	Sort
Lampe type:	LED
Produkttype:	Disco stroboscope
Strømforbrug (typisk):	300 W
Antal:	1
Strømkilde:	Vekselstrøm
Pæreeffekt:	15 W
Antal lamper:	19 Lampe( r)
Bæretaske:	Ja
Lysfarve:	Blue, Green, Red, White
Indgangsspænding:	100 - 240 V
Strålevinkel:	30 °
Synsfelt:	45 °
Hældningsvinkelområde:	0 - 270 °
Indgangsfrekvens:	50/60 Hz
Panoreringsområde:	0 - 540 °
Velegnet til indendørsbrug:	Ja
Lysdæmper:	Ja
Belysningsstyrke:	60000 Lux
Belysningstilstande:	Auto, DMX
Antal DMX kanaler:	37 kanaler
Antal minimum DMX kanaler:	10 kanaler
DMX udgang:	Ja
XLR udgående:	1
Bold diameter:	- "
XLR indgang:	Ja
DMX indgang:	Ja
Hældningsindstilling:	Ja
Strobe lyshastighed rækkevidde (blink pr. sekund):	0 - 20