Bellman Visit Manual

Bellman Sikkerhed Visit

Læs gratis den danske manual til Bellman Visit (4 sider) i kategorien Sikkerhed. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Bellman Visit, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
Buttons and controls
In the box
BE1560 Visit wrist receiver
BE1570 Charger
Elastic wrist band
Power supply
Power and battery
Mains power: 7.5 V DC/1500 mA
Power consumption
Receiver: Active: 100 mA, Idle: 3 mA
Charger: Active: 650 mA, Idle: 70 mA
Battery power
Receiver: 11.2 V V40H rechargeable
Charger: 41.2 V NiMH rechargeable
Operating and charging time
Receiver: ~30 h, Charging time: ~8 h
Charger: Battery charging time: ~24 h
Environment
For indoor use only
Operating temperature
15° to 35° C, 59° to 95° F
Relative humidity
15% to 90%, non-condensing
Frequency and coverage
Radio frequency
314.91 MHz, 433.92 MHz or 868.30
MHz, depending on the region
Coverage
50 – 250 m, 55 - 273 yd. depending
on the radio frequency and the
characteristics of the building
Accessories
BE1270 Bed shaker
BE9086 External trigger cable
Dimensions and weight
Receiver Charger
Height 49 mm 100 mm
Width 38 mm 95 mm
Depth 12 mm 117 mm
Weight 27 g 185 g
Visit LEDS
The Visit LEDs normally indicates
the following:
Orange LED, pacier symbol
The baby monitor is activated
Green LED, door symbol
The door transmitter is activated
Yellow LED, telephone symbol
The phone transmitter is activated
Red LED, re symbol
The smoke alarm is activated
Technical specications
Visit wrist receiver
Visit LEDs
Silicone wrist band 3.5 mm bed shaker input
Charger Charging LED
BE1270 bed shaker
Function button Mains LED
Bed shaker
test button
Battery LED
Power supply
BE8102
”click”
1 2 3
Getting started
1 Pull the battery tab on the charger and connect the power supply to the mains outlet. The mains LED lights up in green.
Place the wrist receiver in the charger and charge it for at least 2 hours. The charging LED is green during charging.
2 To test the radio link you need a Visit transmitter. Press the test button/s on the transmitter.
3 The receiver starts to vibrate and lights up a Visit LED. If a bed shaker is connected during charging, it will vibrate.
If nothing happens, see Troubleshooting.
Default signal pattern
When a transmitter is activated, the wrist receiver lights up an LED and starts to vibrate with a certain pace. This is called
signal pattern. The transmitters determine the pattern, and the default is as follows:
Activated transmitter Wrist receiver LED Wrist receiver / bed shaker vibration
Door transmitter Green Slow
Push button transmitter Green Slow
Telephone transmitter Yellow Medium
Baby monitor Orange Fast
Smoke alarm Red Long
Changing the signal pattern
The signal pattern can only be changed on the transmitters. See Changing the signal pattern for the relevant transmitter.
LED indications
When the wrist receiver battery is nearly depleted, the battery LED starts to blink in yellow. The charging time is up to 8 h.
The charger is equipped with a battery backup and the charger LEDs indicate the following:
LED Indication Status
Charging LED Green light The receiver battery is being charged.
Mains LED Green light The charger is powered by mains voltage.
Mains LED Green blinks The charger is powered by the battery backup.
Visit wrist receiver

Produkt Specifikationer

Mærke: Bellman
Kategori: Sikkerhed
Model: Visit

Har du brug for hjælp?

Hvis du har brug for hjælp til Bellman Visit stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sikkerhed Bellman Manualer

Bellman

Bellman BE1442 Manual

25 August 2024
Bellman

Bellman BE1441 Manual

24 August 2024
Bellman

Bellman BE1452 Manual

24 August 2024
Bellman

Bellman Visit Manual

24 August 2024
Bellman

Bellman Babyfoonzender Manual

23 August 2024
Bellman

Bellman BE1481 Manual

23 August 2024
Bellman

Bellman Visit 868 - BE1440 Manual

23 August 2024
Bellman

Bellman Visit 868 - BE1530 Manual

23 August 2024
Bellman

Bellman BE1289 Manual

23 August 2024
Bellman

Bellman BE1555 Manual

23 August 2024

Sikkerhed Manualer

Nyeste Sikkerhed Manualer

Aritech

Aritech SHATTERPRO 3 Manual

15 Januar 2025
Axis

Axis Camera Station S9001 Mk II Desktop Terminal Manual

15 Januar 2025
Eminent

Eminent EM6511 Manual

15 Januar 2025
Ranex

Ranex RX2567-Z Manual

11 Januar 2025
NetworX

NetworX NX-595E IP Communication Module Manual

5 Oktober 2024
Provision-ISR

Provision-ISR NVR2-4100P Manual

23 September 2024
Gira

Gira 0342 Manual

23 September 2024
Unitron

Unitron Smart Alert Systeem Manual

23 September 2024
Netatmo

Netatmo Welcome Manual

21 September 2024
NetworX

NetworX NX-408 Manual

20 September 2024