Best 639 Manual

Best Ikke kategoriseret 639

Læs gratis den danske manual til Best 639 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Best 639, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

3¼” x 10” RECTANGULAR DUCT

WALL CAP INSTALLATION

INSTRUCTIONS

Plan installation carefully. Before installing wall cap, make

sure that birdscreen is in place and bowed outward. Make

sure that birdscreen does not interfere with movement of

damper flap. Refer to Figure 5 and Step 8 under “Mainte-

nance.”

Wall cap accepts 3¼” x 10” duct. Tape all ductwork joints with

duct tape to prevent air and water leaks.

INSTALLATION IN NEW BRICK CONSTRUCTION

1. Cut opening 3½” x 10¼” in sheathing or wall board so that

wall cap will line up easily with duct.

2. Determine thickness of final wall and adjust wall cap and duct

to that cap will be flush with face brick. (Fig. 1)

3. After face brick is installed, nail or screw cap to wall using

holes in wall cap flange.

4. Caulk all around flange with high-quality caulking com-

pound. (Fig. 2)

5. Run ductwork from range hood or fan. Tape all joints with

duct tape.

INSTALLATION IN FRAME CONSTRUCTION

1. Cut opening 3½” x 10¼” in wall so that wall cap will line

up easily with ductwork. (Fig. 3)

2. Nail down siding corners. Trim opening in siding with cas-

ing strips. (Fig. 4).

3. Determine thickness of final wall and adjust wall cap and

duct so that cap will be flush with siding. (See Fig. 1)

4. Nail or screw cap to wall using holes in wall cap flange.

5. Run ductwork back to range hood or fan. Tape all joints

with duct tape.

6. Seal all around flange with high-quality caulking com-

pound. (See Fig. 2)

MAINTENANCE (See Figure 5)

To replace damper flap or gasket material:

1. Remove birdscreen using sharp point (screwdriver, knife,

etc.), pull down and pop screen out.

2. Using a pointed-nose pliers, squeeze barbs on black

damper bushing and push bushing out (remove bushing

on one side only).

3. Pull damper rod out of flap.

4. Replace defective or worn parts.

5. Replace damper flap with rib on outside, and push damper

rod through cap and part way through notch in center of flap.

6. Slide spring over rod and push rod through flap. Make sure

that rod seats itself into damper bushing.

7. Push damper bushing into cap. Make sure that damper

flap opens freely.

8. Replace birdscreen. Birdscreen must bow outward as

shown in Figure 5 to ensure free movement of damper flap.

NOTE: The high quality paint coating on our outdoor acces-

sories may be used as the exterior finish or as a prime coat

for the finish of your choice. Apply the coating best suited for

the special conditions of your application.

99040510D

Broan-NuTone LLC Hartford, WI

www.broan.com 1-800-558-1711

KEY PART NO. DESCRIPTION

1 97006177 Housing (Painted)

97006251 Housing (Aluminum)

2 98005586 Bird Screen

3 98005588 Damper Flap

4 99500323 Long Sealant Strip

5 98005585 Damper Rod

6 99100379 Damper Bushing (2 req.)

7 99140100 Damper Spring

Produkt Specifikationer

Mærke:	Best
Kategori:	Ikke kategoriseret
Model:	639

Har du brug for hjælp?

Hvis du har brug for hjælp til Best 639 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Best Manualer

3 Oktober 2024

3 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

2 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025