IMPORTANT SAFETY INSTRUCTION
1
Product Disclaimer:
Product Installing:
Actual product may vary. BigBlue reserves the right to the final interpretation of the
contents in this manual and all documents associated with this product. We also
reserve the right to update, change or terminate this manual without prior notice. If
you have any questions or comments, please contact us at support@ibigblue.com.
Read all the instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Failure to operate the product correctly may result in damage to the product or
personal property, and cause serious injury.
BigBlue will not be held liable for damages caused by fire, earthquake, accidents,
intentional misconduct on the part of the customer abuse or other abnormal conditions.
BigBlue reserves the right to the final interpretation of the contents of this user manual.
WARNING: This product can expose you to chemicals such as Di (2-ethylhexyl)
phthalate (DEHP), which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Please check the accessories before installation, some accessories need to be purchased
separately.
To prevent product damage and the risk of injury to others, kindly follow the instructions
outlined in the user manual during installation.
This product is grid-tied. Please check if it is allowed in your area. Depending on your
region, official approval may be required either before or after installation.
Before connecting to the microinverter, please verify its rated power. Ensure that the
POWAFREE ‘s output does not exceed the microinverter's rated power.
Keep a distance of 50mm between POWAFREE PV-Route 800 and other objects.
DO NOT expose this product to water or moisture.
DO NOT place the product near a heat source or under high temperature, such as a fire
source, an operating stove, or other product that produces heat. No naked flame
sources, such as lighted candles, should be placed on the product.
Ensure that this product and microinverter are installed firmly to avoid accidents and
product damage caused by dropping.
Do not move or shake the unit while operating as vibrations and sudden impacts may
lead to poor connections to the hardware inside.
