Bioland E128 Manual

Bioland Termometer E128

Læs gratis den danske manual til Bioland E128 (2 sider) i kategorien Termometer. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Bioland E128, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Model: E128
User's Manual
Infrared Ear Thermometer
Carefully read these instructions and warnings before use
and keep for future reference.
First of all, thank you for choosing our ear thermometer. It
is a high-technology medical thermometer for measuring
the temperature of human body via infrared rays emitted
by the ear-drum.
1) Readings are displayed promptly.
2) Measuring with probe cover free.
3) Probe of water proof design, easy cleaning.
o
4) Fever alarm function, when temperature is over 38 C.
5) Automatically displays battery power.
6) Backlight screen is adopted.
1) When first use please take off the plastic strip which
insure the battery protection. (Refer to the PIC-1)
PRODUCT OVERVIEW
USAGE PRECAUTIONS
2) Do not throw the thermometer with household waste.
Use the collection systems available for you. (Refer to
the PIC-2）
3) Don't expose the thermometer to extreme temperatures
for long periods, e.g. in the sun, in a car.
4) The thermometer probe may be cleaned with a
disinfectant wipe or cotton wool soaked in alcohol, but the
body of the thermometer is not watertight, don't place it in
any liquid, please use a clean, dry tissue.
5) Avoid violent impacts and do not drop the product.
6) Avoid direct contact to the tip of the probe where the
sensor is located.
7) Don't try to dismantle the thermometer.
8) Keep the probe clean, grease and ear-wax can affect the
results of measurements.
9) Don't take readings less than half an hour after a meal,
exercise, a bath or a period spent in a particularly hot or
cold environment.
10) You had better leave an interval of at least 30 seconds
between two continuous measurement.
11) An individual's body temperature corresponds to an
average value. There is no absolute standard for body
temperature. The best way is to measure your
temperature during a normal period and use this average
reading as a benchmark against which to judge your fever.
12) When the ambient temperature is beyond the optimum
operating temperature, an error message "Err" would
appears, and the thermometer can't measue.
PRODUCT DESCRIPTION
TAKING THE TEMPERATURE
temperature value
in measuring/ in waiting
temperature scale Celsius
temperature scale Fahrenheit
fever symbol
memory symbol
battery power symbol
1) Press "Power" button, to turn on the device, you will hear
"Bi-Bi" to enter the measurement mode, and display last
measurement record or zero. (PIC-3 & PIC-4)
PIC-3 PIC-4
PIC-5 PIC-6
2) For measuring, please put the probe of the device into
your ear at the position where you feel comfortable.
(Refer to the PIC-5)
3) While the probe entering into the ear, press the "START "
button, wait for about1 second to complete the
measurement with the beep. Take out the device from the
ear for reading result. (Refer to the PIC-6)
Note: After a measurement, there is waiting icon" " flash
for about 10 seconds, please wait the icon disappear,
then to start next measurement.
4) About 30 seconds after the measurement, the device will
shut off automatically with a beep and OFF showing.
(Refer to the PIC-7)
PIC-7 PIC-8
PIC-9 PIC-10
o o
7) While the temperature measured lower than 32 C(89.6 F),
Lo (stands for "Low") will be showed on the screen.
(Refer to the PIC-10)
8) If the battery power icon flash while the device is turned
on, the power of the battery is very low, the device can not
work and will shut off in 10 seconds. (Refer to the PIC-11)
PIC-11
5) While the ambient temperature beyond the working scale,
(refer to technical specifications) the device will not work
with Err showed on the screen. (Refer to the PIC-8)
o
6) While the temperature measured higher than the 42.9 C
o
(109.2 F), Hi (stands for "High") will be showed on the
screen. (Refer to the PIC-9)
Review Memory Data
1) Press "Power" button to turn on the device, you will hear
"Bi-Bi" to enter the measurement mode.
2) Press "Power" button again, to see the memory
sequence number "1" flashing, it is in the memory
review mode.
3) Press "Start" button to review the memory data from 1
up to 19 memories.
4) Press and Hold "Power" button for more than 3 seconds
to turn device off, or wait 30 seconds idle, device will
turn off automatically.
PIC-12
Convert Between Celsius and Fahreaheit Unit
1) Press "Power" button to turn on the device, you will hear
"Bi-Bi" to enter the measurement mode.
2) Press "Power" button twice to enter Unit Convert Mode.
o o
3) Press "Start" button to change unit between " C" and " F".
(Refer to the PIC-12)
4) Press and Hold "Power" button for more than 3 seconds
to save and turn device off.
3) Install two "AAA" batteries, according to the polarity
marked inside the battery compartment.
(Refer to the PIC-15)
4) Replac the battery cover. (Refer to the PIC-16)
PIC-15 PIC-16
TECHNICAL SPECIFICATIONS
E128
Measuring range
2X1.5Volt "AAA" batteries
display backlight
indicator
3.
4.
WARRANTY
We grant you a one year warranty after the date of
purchase. Any damage causes by improper handling shall
not be covered by the warranty. Batteries and packaging
are excluded from the warranty. Any other improper usage
damage claims excluded. A warranty claim must be
submitted with the purchase receipt. Please pack your
defective thermometer well and return to dealer.
611-128000-000
VER 1.0, 12/2007
LOW BATTERIES
There are battery power signs showing the status of the
power capacity on the screen.
The power is abundant.
The power is enough.
The power is small, the device
can still work, but the abnormity
of the background light and
buzzer. Please prepare for the
replacing of the battery.
Flashing, the power is weak,
the device can not work,
please replace the battery.
CHANGING THE BATTERY
1) Pull off the battery cover according to the
illustrator. (Refer to the PIC-13)
2) Take out the battery. (Refer to the PIC-14)

Produkt Specifikationer

Mærke: Bioland
Kategori: Termometer
Model: E128

Har du brug for hjælp?

Hvis du har brug for hjælp til Bioland E128 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Termometer Bioland Manualer

Bioland

Bioland T101 Manual

21 September 2024
Bioland

Bioland T109 Manual

25 August 2024
Bioland

Bioland E127 Manual

22 August 2024
Bioland

Bioland T102 Manual

21 August 2024
Bioland

Bioland T103 Manual

6 August 2024
Bioland

Bioland E128 Manual

31 Juli 2024

Termometer Manualer

Nyeste Termometer Manualer

Emos

Emos E0345 Manual

1 August 2025
Techno Line

Techno Line WS 9175 Manual

1 August 2025
Emos

Emos EGS0102 Manual

1 August 2025
Braun

Braun Sensian 3 BNT050 Manual

24 Juli 2025
Milwaukee

Milwaukee Temp-Gun 2268-20 Manual

22 Juli 2025
Milwaukee

Milwaukee Temp-Gun 2267-20 Manual

22 Juli 2025
Alecto

Alecto BT5 Manual

21 Juli 2025
Steinberg

Steinberg SBS-IR-1300-16 Manual

19 Juli 2025
Comelec

Comelec TN400 Manual

18 Juli 2025
Sauter

Sauter JIT 200 Manual

17 Juli 2025