®® ®
Thank you for buying a Black & Decker paper shredder. Black & Decker
paper shredders have become the benchmark for innovation, performance
and quality to protect against identity theft. We have taken great care in
designing and engineering a product to meet and exceed your needs.
To ensure years of safe, efficient performance, please read
these important product usage and safety instructions.
If you have any questions regarding the product, please feel free to
call toll-free 1-800-297-5028.
WA R N I N G
ALWAYS KEEP OUT OF REACH OF CHILDREN
WARNING ICONS:
The icons on top of the shredder warn the user of the potential dangers if the shredder
is used improperly.
Customer Service
Black & Decker has a toll-free help line for customers living in the United States
and Canada. Our customer service phone number is 1-800-297-5028 or visit our website
at . www.blackanddeckershredders.com
Maintenance
It is important to empty the waste bin regularly to ensure the smooth operation of the
cutting cylinders. The shredder will not operate when the bin is full. Regular oiling is also
necessary for proper performance. It is recommended to use shredder oil every few weeks.
Troubleshooting
If you have a problem with your shredder, check the symptoms and remedies below.
If you cannot solve the problem this way, contact Black & Decker paper shredders
Customer Service. Do not open shredder head to attempt repair: It could expose
you to shock and will void your warranty.
- Check to see if bin is full. If bin is full, indicator light (7)
will be on. Follow instructions under maintenance.
- Oil cutting cylinders.
Shredder squeaks, grinds or runs
below capacity.
- No action required.
This is a self-cleaning function.
Shredder continues to run for
1 or 2 seconds after shredding
has been completed.
Symptom Remedy
- Make sure shredder is plugged in, power switch on the
back of unit (1), is in ON position (–), and function
switch (2) is in the automatic Forward position (=).
- Make sure bin (5) is closed. If bin is open, indicator light
(7) will be on.
- Wait 30 minutes for shredder to cool down before
trying again. If shredder is overheated, indicator light
(6) will be on.
- Press and hold the function switch (2) in Reverse (–)
position and attempt to back paper out of shredder. If
you are unable to clear the jam, turn off and unplug the
shredder; remove the bin and carefully remove any
paper extending below the cutting cylinders.
Shredder does not start or stops
while shredding.
Paper jams.
WA R N I N G
WARNING: Hazardous moving parts. Keep fingers and other body parts away.
WARNING: To reduce risk of fire, electrical shock or injury:
NEVER allow children to operate a paper shredder, even under adult supervision.
A paper shredder is a toy.NOT
DO NOT use flammable synthetic oil, petroleum-based products or aerosols of any kind
on or near product at any time.
DO NOT operate any electrical product with a damaged cord.
ALWAYS keep the power cord clear of the shredder opening.
AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur.
DO NOT handle plug or product with wet hands.
ALWAYS keep children and pets away from the shredder.
ALWAYS unplug shredder when not in use.
DO NOT attempt to feed more sheets of paper than specified on the feeder.
DO NOT attempt to shred materials other than paper, credit cards and CDs.
DO NOT hold CD or DVD with finger through the center ring while feeding into shredder.
ALWAYS empty the wastebasket prior to becoming full.
DO NOT place shredder near heat or water source.
DO NOT open shredder head to attempt repair: It could expose you to electric shock and
will void your warranty.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The Following are Important Safety Instructions.
Read All Instructions Before Using.
Setup
• Check shredder for damage or defects; some particles of paper are normal
due to product testing.
• Plug the power cord into any easily reached standard outlet.
• To use, have the power switch (1), located on the back of the shredder, in the
ON (–) position.
• Release the protective cover (4) by pushing the protective cover release
button (3). The cover will pop up. Simply lift the cover into the ready position.
• Press the function switch (2) into the automatic (=) position. If the control panel
lights up, the shredder is ready for use.
• (=) indicates automatic Forward
(o) indicates machine is Off
(–) indicates Reverse
• Place allotted amount of paper
into the shredder using the
convenient paper guides on the
sides of the protective cover.
When Not In Use
Close the protective cover. You will
know it is secure when the cover snaps
in place and the front button depresses.
ALWAYS unplug before emptying bin.
Indicator Lights
To provide ease-of-use, your Black & Decker
paper shredder has indicator lights as visual
cues to communicate any problems.
If the light below the thermometer is
illuminated, this means the shredder needs
to cool down. Simply turn off the shredder
and let cool for approximately 30 minutes.
If the light below the bin full icon is illuminated, this means the shredder bin
needs to be emptied. Unplug shredder, empty the bin and close the bin for use.
If the light below the icon of the bin with the door open is illuminated, this means
the door is not fully shut. Check to be sure the door is closed. Once it is closed
completely, the indicator light will turn off.
Flashing Light. If a flashing light appears on the indicator bar, a jam exists; see
the troubleshooting section to clear the jam.
4
protective
cover
3
protective
cover
release
button
2
function
switch
5
waste bin
7
overheat
indicator light
6
bin open
indicator light
8
bin full
indicator light
Product Information
This product is designed to shred paper, staples, small paper clips, credit cards, CDs and DVDs.
It is not intended to shred large paper clips, continuous forms, adhesive labels, transparencies,
newspaper, cardboard or any other plastic other than credit cards. Using it for these purposes
is likely to cause irreparable damage.
power
switch
(on back)
1
