With each wash cycle.
Compartment
For pro gramm es with pre-wash only.
(Follow the )User Manual
Electric indicator on control panel (if provided).
Check the rinse aid level
Load the baskets
Select a p rogramme
Turn on the water ta p and press the . T he machine will start working
after about 10 seconds.
Start/Pause Button
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 min utes) before unloading the dishwa sher to avoid handl i ng
the dishes and utensils while they are still hot and more susceptible to break.
The y will a lso dry better.Unload th e appliance, starting from the lower b asket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Scrape off any la rge amount of leftover food. Soften remnants of burnt food in pa ns,
then l oad the baskets. Refer to th e dishwashe r loading instruct ions.
Close the door,press the Programme Button until the selected programme lights up.
( See the section entitled Operation instructi on )“ ”
When the working cy cle has finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appliance is switched
off during a wash cycle.
Op en t he do or carefull y.
Hot st eam may escape
when the door is opened.
If the appliance is switched off during a wash cycle, when switched
on agai n, plea se re-select th e washing cycle and operate the dishwasher
according to the original Power-on state.
Switch on the appliance Pre s s the On/Off button to switch on the applian c e, Open the door.
For detailed operating method read the corresponding content on the instructio n manual.
1. A running cycle can only be modified if it has been running fo r a sho rt time. O therwise the detergent
m ay have alre ady be en released and the water already drained. If this is the case, the de tergent
dispenser must be refilled.
2.
Press the S tart/Pause button, press th e program button for more than three seco nds, the
machine will be in standby state, then you can change the program to the desired cycle setting
1.Press the Sta rt/Paus e But ton to stop the washin g.
2.Open the door a little .
3.After the spra y arms stop working, you can open th e door
c ompletely.
4.Add forgotten dishes.
5.Close the door.
6.Press the St a rt/Pau se Button, the dishwa sher will run
after 10 seconds.
