Bobrick B-165 2436 Manual

Bobrick Ikke kategoriseret B-165 2436

Læs gratis den danske manual til Bobrick B-165 2436 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Bobrick B-165 2436, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 4/19/21

R/B Printed in U.S.A.

Technical Data

continued . . .

MIRROR WITH

STAINLESS STEEL

CHANNEL FRAME

Designer's Notes:

1. Special-order sizes available on request.

2. Maximum size mirror available, 96" x 72'' (244 x 183cm); minimum size, 12" x 12" (30 x 30cm).

3. All Bobrick framed mirrors are manufactured to overall width and height dimensions. EXAMPLE: A 24" x 36''

(61 x 91cm) mirror will be furnished 24'' x 36'' (61 x 91cm) outside-of-frame to outside-of-frame.

4. To specify special sizes use Series Number followed by width x height in inches. EXAMPLE: B-165 2024 20" x

24" (51 x. 61cm)

5. Bobrick framed mirrors are manufactured to a tolerance 1/8'' (3.2mm).

6. For su󰀩cient space to lift mirror onto wall hanger(s), provide 1" (25mm) minimum clearance above top of

mirror frame.

7. Provide 1/2'' (12.7mm) minimum clearance on each side.

B-165

SERIES

Note: Mirrors greater than 36" in width will have multiple

hanger brackets with a typical 8" o󰀨 each edge.

Snap Locking Design

(Rear View)

"2S" Tab Design

(Rear View)

- for all other mirrors up to a width of 36"

Figure: 1 Figure: 2

3/4''

19mm 2-1/2''

65mmS

2-9/16''

65mm

4'' or 5" Typ.

100 or 125mmS

Side View

Back Plate/Wall Hanger

Frame

Mirror

Finish Face of Wall

Frame

Mirror

S S

1" to 1-1/2"

25mm to 40mm

(Does not engage with lower Louvers)

Half

Mirror Width

100mm Typ.

Mirror

Bracket

w/Tape

2-7/8"

75mm

Mirror

Bracket

1/2"

13mm

Finish Face

of Wall

B-165 1824 18'' (46cm) 24'' (61cm)

B-165 1830 18'' (46cm) 30'' (76cm)

B-165 1836 18'' (46cm) 36'' (91cm)

B-165 2430 24" (61cm) 30" (76cm)

B-165 2436 24'' (61cm) 36'' (91cm)

B-165 2448 24'' (61cm) 48'' (122cm)

B-165 2460 24'' (61cm) 60'' (152cm)

STANDARD B-165 SERIES MIRRORS

MODEL

NO.

OVERALL SIZE

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-165 Rev. 4/19/21

R/B Printed in U.S.A.

MATERIALS:

Frame — Type-430 stainless steel, 1/2" x 1/2" x 3/8" (13 x 13 x 9.5mm) channel with 1/4" (6mm) return at rear for Snap Locking

Design; 1/2" x 1/2" x 1/2" (13 x 13 x 13mm) channel for Lock Tab Design, with bright polished ﬁnish. One piece frame with 90 degree

mitered corners. Galvanized steel back has integral horizontal hanging brackets near the top for hanging the mirror and near the bot-

tom to prevent the bottom of the mirror from pulling away from the wall.

Mirror — No. 1 quality, 1/4" (6mm) select ﬂoat glass: selected for silvering, electrolytically copper-plated by the galvanic process, and

guaranteed for 15 years against silver spoilage. Back is protected by full-size, shock-absorbing, water-resistant, nonabrasive, polyethyl-

ene padding.

Concealed Wall Hanger — For snap locking design: Heavy gauge steel construction. Incorporates upper and lower members, which

engage backplate louvers to keep mirror against the wall. For "2S"-Tab design: Incorporates upper bracket engaging in upper louver

and double sided tape below the bottom louver securing mirror to concealed wall hanger.

INSTALLATION:

Mount wall hanger on wall with screws (not furnished) at points indicated by an . For plaster or dry wall construction, provide S

backing to comply with local building codes, then secure wall hanger with screws (not furnished). When providing a concealed

backing, allow backing to cover minimum range of mounting hole locations shown on drawing. For other wall surfaces, provide

ﬁber plugs or expansion shields for use with screws (not furnished), or provide 1/8" (3mm) toggle bolts or expansion bolts.

Snap Locking Design: Hang mirror on wall hanger with all four backplate louvers engaged behind horizontal wall hanger

members. To do this, mirror must be centered in front of the wall hanger horizontally, pressed ﬂat against the wall approximate-

ly 1" (25mm) above ﬁnal position and then lowered into ﬁnal position.

"2S" Tab Design: Comprises of two brackets, while the bottom one is furnished with double side tape. Bottom hanger

bracket's mounting holes must be 1" - 1 1/2" above mirror's bottom edge. Note: Bottom hanger bracket is not supposed to

engage with louvers of mirror's backplate. Hang mirror on wall top hanger bracket with the top two louvers engaged behind top

wall hanger bracket.To do this, mirror must be centered in front of the wall hanger horizontally, pressed only at the top against

the wall approx. 1" (25mm) above ﬁnal position an then lowered into ﬁnal position. When lowering, pull mirror's bottom edge

off the wall by preventing bottom bracket from engaging. Once lowered, mirror must be pressed against wall to engage with

double sided tape of lower wall hangar bracket.

Snap Locking Design — Locking devices automatically secure mirror to concealed wall hanger when it is lowered into ﬁnal

position (see ﬁgure 3). Locking devices may be unlocked by inserting two ﬂat blade screwdrivers behind each side of mirror

near the bottom or under the bottom of the mirror and pulling mirror bottom forward and then up.

"2S" Tab Design — Secure mirror to concealed wall hanger by pressing mirror against double sided tape of lower hanger

once it is lowered into ﬁnal position (see ﬁgure 4).

SPECIFICATION:

Mirror shall have a one-piece type-430 stainless steel channel frame, with 90 mitered corners; all exposed surfaces shall °

have bright polished ﬁnish. Select ﬂoat glass mirror shall be guaranteed for 15 years against silver spoilage. The back shall be

protected by full-size, shock-absorbing, water-resis tant, nonabrasive, polyethylene padding. Galvanized steel back shall have

integral horizontal hanging brackets located at top and bottom for mounting on concealed wall hanger to prevent the mirror

from pulling away from the wall. Locking devices secure mirror to concealed wall hanger. Mirror shall be removable from the

wall.

Framed Mirror shall be Model B-165 _______________ (insert width and height) of Bobrick Washroom Equipment,

Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment

Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom

Equipment Limited, United Kingdom.

Aprox. 1"

25mm

Initial

Position

Final

Position

Aprox. 1"

25mm Initial Position

Final

Position

Figure: 3 Figure: 4

"2S"-Tab Design - up to 36" Width

(Front View)

Snap Locking Design

(Front View)

Produkt Specifikationer

Mærke:	Bobrick
Kategori:	Ikke kategoriseret
Model:	B-165 2436

Har du brug for hjælp?

Hvis du har brug for hjælp til Bobrick B-165 2436 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Bobrick Manualer

Bobrick B-5191 Manual

5 Juli 2025

Bobrick B-29744 Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Bobrick B-6977 Manual

7 April 2025

Bobrick B-6861 Manual

7 April 2025

Bobrick B-4390 Manual

7 April 2025

Bobrick B-699 Manual

7 April 2025

Bobrick B-9806 Manual

7 April 2025

Bobrick B-5806 Manual

7 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025

DAP-Audio DCP-26 MKII Manual

12 September 2025

Vivax MF-45E Manual

12 September 2025