Bobrick B-2860 Manual

Bobrick Ikke kategoriseret B-2860

Læs gratis den danske manual til Bobrick B-2860 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Bobrick B-2860, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

INSTRUCTIONS FOR INSTALLATION

BOBRICK ROLL PAPER TOWEL MODULE REPLACEMENT KIT 2860-53 OR 3961-52

In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.

200 Commerce Drive, Clifton Park, New York 12065-1350 • Tel: (518) 877-7444 • FAX: 518-877-5029

11611 Hart Street, North Hollywood, California 91605-5882 • Tel: (818) 982-9600 • FAX: 818-503-1102

In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY

45 Rolark Drive, Scarborough, Ontario M1R 3B1 • Ontario East: (877) 423-6555, FAX: (877) 423-8555

• Manitoba West: (877) 423-6444, FAX: (877) 423-8444

Form No.2860-69 Rev. 3/22/10 Printed in U.S.A.

1. Unlock & open the door of the “No Touch Roll Towel Dispenser” B-2860 or B-3961.

2. Locate and remove the two screws and lock washers located at the top back of the roll paper towel module

(See Fig. 1) and the two screws and lock washers located on the bottom, outside of the cabinet, using the allen

wrench provided.

3. Slide the module to the left side of cabinet, tilt the left side of the module slightly upward (approx. 1") and then

pull forward to remove from cabinet. (See Fig. 2)

4. Remove the metal speed nuts from the bottom sides of the old module and place them on the new

replacement module in the same position and orientation as they were on the old module. (See Figs. 3 & 4)

5. Install the new module in the reverse order as described above. Make sure that the speed nuts do not

dislocate as the module is placed into the cabinet. (See Figs. 3 & 4)

6. Insert the top screws and lock washers into the threaded holes through the module slots to align the module

and then insert the bottom screws and lock washers. Tighten all screws securely using the allen wrench

provided.

7. Fill the roll paper towel module per the instructions on the inside of the door.

8. Close and lock the door.

Fig. 1

Remove Screws

Fig. 3

Speed Nut (Left Side of Module)

Fig. 2

Fig. 4

Speed Nut (Right Side of Module)

Model B-2860 shown below:

QA031

Produkt Specifikationer

Mærke:	Bobrick
Kategori:	Ikke kategoriseret
Model:	B-2860

Har du brug for hjælp?

Hvis du har brug for hjælp til Bobrick B-2860 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Bobrick Manualer

Bobrick B-29744 Manual

15 Juni 2025

Bobrick B-2860 Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Bobrick B-166 1836 Manual

4 April 2025

Bobrick B-165 2436 Manual

4 April 2025

Bobrick B-35643 Manual

25 September 2024

Bobrick ConturaSeries B-4112 Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 303676 Manual

16 Juni 2025

Playtive IAN 307527 Manual

16 Juni 2025

Playtive IAN 327441 Manual

16 Juni 2025

Xblitz G750 Pro Manual

16 Juni 2025

Playtive IAN 285603 Manual

16 Juni 2025

Playtive HG05646 Manual

16 Juni 2025

Milwaukee M12 IR Manual

16 Juni 2025

Blodgett Invoq 202BG Manual

16 Juni 2025

Aiphone GT-AD Manual

16 Juni 2025

Playtive IAN 113608 Manual

16 Juni 2025