
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 2/9/17, R/A, S/A Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Concealed Mounting Bracket
74-1/2" 1892 mm
Standard Mounting Height off Floor
for 72" Bobrick Shower Curtain and Hooks
Curtain Rod — 18-8, Type-304, 20-gauge (1.0mm) stainless steel tubing with satin finish. 1" (25mm) outside diameter.
Available in lengths from 36" (915mm) up to 72" (1830mm).
Flanges (2) — 1-3/8" (35mm) diameter. Chrome-plated plastic. Bright polished finish.
Concealed Mounting Brackets (2) — Aluminum.
Remove protective backing from tape attached to concealed mounting brackets. Position mounting brackets on opposite shower
walls and secure with screws furnished by manufacturer. For plaster or dry wall construction, provide concealed backing to
comply with local building codes, then secure brackets with screws furnished. For other wall surfaces, provide fiber plugs or
expansion shields for use with screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts. Slide flanges onto
opposite ends of curtain rod. Position curtain rod, then screw threaded flanges onto mounting brackets.
Shower curtain rod shall be Type-304, 20-gauge (1.0mm) stainless steel with satin finish. It shall have an outside diameter of 1"
(25mm). Flanges shall be 1-3/8" (35mm) diameter chrome-plated plastic with bright polished finish. Unit shall be equipped with
concealed mounting brackets.
Shower Curtain Rod shall be Model B-207 x ______________ (insert length) of Bobrick Washroom Equipment Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment