Boska Unika+ Manual

Boska Skæremaskine Unika+

Læs gratis den danske manual til Boska Unika+ (32 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Boska Unika+, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/32
864112 GOL20M 1
INSTALLATION & USE
1 Remove the blade cover. Please note: the blade is sharp!
2 Plug the transformer into the socket (230v~50hz).
3 Set the temperature yourself with the temperature control, from level 1 to 10.
The knife is warm within 5-10 minutes.
4 Lay the cheese to be sliced with the rind against the clamping plate and the light yellow,
edible part of the cheese against the thickness regulator. Please note: do not press the cheese
against the thickness regulator; place the cheese against it and the blade will do the rest.
5 Adjust the knobs to obtain the desired slice thickness (max 15mm). To minimize slicing loss,
cut wedge-shaped slices;
5A Set the adjusting knob at the edge of the rind higher than the adjusting knob further away
from you, so that the cheese is nicely round-cut and you are not left with any unsalable pieces.
6 Bring the lever down to cut off a slice of cheese.
7 Turn the temperature controller off.
8 Turn the adjusting knobs back to 0 to prevent cuts.
EN
Unika +
CLEANING
• Make sure the temperature controller is turned off, the adjusting knobs are back to 0, the
plug has been removed from the socket and the appliance has cooled down fully.
• The Unika+ should be cleaned daily.
• Clean the Unika+ before you change to a different type of cheese, to prevent
cross-contamination.
• Use hot water, a soft brush and a neutral cleaning agent such as mild soap or washing-up
liquid to clean the Unika+.
• Make sure that the water is no hotter than 70°C to prevent damage to the plastic
components.
• Never clean with a hard-bristle brush, abrasive materials, cleaning agents containing
baking soda or chlorine, or disinfecting or corrosive cleaning agents.
• Rinse the Unika+ with clean water. Dry the machine thoroughly, to prevent components
from being damaged by dust and moisture.
• After cleaning, put the cover back on the blade.
2 864112 GOL20M

Produkt Specifikationer

Mærke: Boska
Kategori: Skæremaskine
Model: Unika+

Har du brug for hjælp?

Hvis du har brug for hjælp til Boska Unika+ stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skæremaskine Boska Manualer

Boska

Boska Cheese Commander Pro Manual

20 Oktober 2024
Boska

Boska Cheese Commander Pro+ Manual

23 August 2024
Boska

Boska Unika+ Manual

23 August 2024
Boska

Boska Parmesan Pro Manual

23 August 2024
Boska

Boska Hotel Block Cutter Manual

23 August 2024
Boska

Boska Cheese-O-Matic Manual

23 August 2024

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Fry Factory

Fry Factory AFC-50 Manual

28 September 2025
Jaccard

Jaccard Fillet-O-Matic Manual

28 September 2025
Jaccard

Jaccard VA 2000 Manual

28 September 2025
JAC

JAC Pico Manual

26 September 2025
Axis

Axis VOLANO 12 RED Manual

23 September 2025
Lincoln Electric

Lincoln Electric Tomahawk 1500 Manual

23 September 2025
Chefman

Chefman RJ49 Manual

23 September 2025
Eta

Eta Tempo 1094 90000 Manual

21 September 2025
Harper

Harper HMS250 Manual

21 September 2025
FERM

FERM PRM1020P Manual

20 September 2025