Boss GT-1000CORE Manual

Boss Ikke kategoriseret GT-1000CORE

Læs gratis den danske manual til Boss GT-1000CORE (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Boss GT-1000CORE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

Owner’s Manual

Owner’s Manual (this document)

Read this rst. It explains the basic things you need to know in

order to use the GT-1000CORE.

PDF Manual (download from the Web)

5Parameter Guide

This explains all parameters of the GT-1000CORE.

5Sound List

This is a list of the sounds built into the GT-1000CORE.

5MIDI Implementation

This is detailed information about MIDI messages.

To obtain the PDF manual

1. Enter the following URL in your computer.

http://www.boss.info/manuals/

2. Choose “GT-1000CORE” as the product name.

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Turning the Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Specify the Type of Amplier You Have Connected . . . . . . 3

Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Using the Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Tuner Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

About the Play Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Selecting the Control Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the GT-1000CORE with a Bass Guitar . . . . . . . . . . . . . . 5

Editing: Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Basic Procedure for Eect Editing . . . . . . . . . . . . . . . . . . . . . . . . 6

Eect Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using STOMPBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Editing the STOMPBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Reading STOMPBOX Settings into a Patch . . . . . . . . . . . . . . . 7

Writing Patch Settings into a STOMPBOX . . . . . . . . . . . . . . . . 8

Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Editing: MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic MENU Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Assigning Favorite Parameters to [1]–[5] Knobs . . . . . . . . . . 9

Adjusting the Contrast (Brightness) of the Display . . . . . . . 9

Restoring the Factory Default Settings (Factory Reset) . . . 10

Turning O the Auto O Function . . . . . . . . . . . . . . . . . . . . . . . 10

Using the Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the USB Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the GT-1000CORE as an Audio Interface . . . . . . . . . . . 11

Connecting with an External MIDI Device . . . . . . . . . 12

Operations from the GT-1000CORE . . . . . . . . . . . . . . . . . . . . . . 12

Operations from an External MIDI Device . . . . . . . . . . . . . . . . 12

Footswitch and Expression Pedal Settings . . . . . . . . 13

Assigning a Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Making Assignments from the Eect Edit Screen

(Quick Assign) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Connecting External Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Assigning Looper Functions to Switches . . . . . . . . . . . . . . . . . 15

Loop Playback Level Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switch Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Before using this unit, carefully read “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s

Manual (p. 16, 17)).After reading, keep the document(s) where it will

be available for immediate reference.

Getting Ready

Connecting the Equipment

* To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

* Before turning the unit on/o, always be sure to turn the volume

down. Even with the volume turned down, you might hear some

sound when switching the unit on/o. However, this is normal

and does not indicate a malfunction.

NOTE

While the display indicates “SAVING...,” data is being

saved. Do not turn o the power during this time.

SEND (1, 2)/RETURN (1, 2) jacks

Connect an external eect processor

here.

OUTPUT jack

Connect your equipment to the OUTPUT jack(s).

Connect your guitar, etc.

MIDI IN/OUT jacks

Connect an

external MIDI

device here.

(p. 12)

* Use a

TRS/MIDI

connecting cable (sold separately:

BMIDI-5-35) to connect an

external MIDI device.

* Do not connect an audio

device here. Doing so will cause

malfunctions.

USB COMPUTER port

Use a USB cable

to connect to a

computer and

exchange audio/MIDI

data between the

GT-1000CORE and

the computer (p. 11).

You can also use the SEND (1, 2)/RETURN

(1, 2) jacks as SEND (L, R)/RETURN (L, R) jacks

for connecting a stereo eect unit.

You can also use the SEND (1, 2) jacks as

SUB OUT jacks, and use the RETURN jacks as

AUX IN jacks.

For details on the parameter, refer to

“GT-1000CORE Parameter Guide” (PDF).

DC IN jack

Connect the included AC adaptor

here.

* The DC IN jack

also serves as the

power switch. Power is turned on

whenever a plug is inserted into

the DC IN jack, and is turned o

when the plug is disconnected.

Indicator

CTL2, 3/EXP 1 jack, CTL4, 5/EXP 2 jack

You can control various parameters by connecting an expression pedal (EV-30,

Roland EV-5: sold separately) or a footswitch (FS-5U, FS-6, FS-7: sold separately).

For details on the settings, refer to “Footswitch and Expression Pedal Settings”

(p. 13).

* You can use the CTL4, 5/EXP 2 jack to switch the channels of your guitar amp. For

details, refer to “GT-1000CORE Parameter Guide” (PDF).

* Use only the specied expression pedal. By connecting any other expression

pedals, you risk causing malfunction and/or damage to the unit.

Connect these to your guitar amp, mixer, or headphones

(sold separately.

* If using a mono connection, use only the R/MONO jack.

* Connect your headphones to the L/PHONES jack. If you’re

using headphones, don’t connect anything to R/MONO

jack.

* Only the OUTPUT signal is output from the headphones.

The SUB OUT signal is not

output. For details, refer to

“GT-1000CORE Parameter

Guide” (PDF).

Turn down the volume of the connected device.

Turn on the power of the amp(s).

Rear Panel Side Panel (Left)

Ground Terminal

* Connect this

to an external

earth or ground

if necessary. Turning the power on.

Connect your guitar or the output of another eect

unit.

If you are inputting in mono, use only the R/MONO

jack.

INPUT R/MONO, L jacks

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.

Attach them in the locations shown in the illustration.

* Using the unit without rubber feet may damage the oor.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage. Also, handle the unit carefully; do not drop it.

Produkt Specifikationer

Mærke:	Boss
Kategori:	Ikke kategoriseret
Model:	GT-1000CORE

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss GT-1000CORE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Boss Manualer

Boss SDE-3000EVH Manual

18 Juli 2025

Boss VE-22 Manual

25 Februar 2025

Boss SDE-3 Manual

23 Januar 2025

Boss Distortion DS-1X Manual

1 Januar 2025

Boss RC-505MK2 Manual

1 Januar 2025

Boss GM-800 Manual

1 Januar 2025

Boss Waza Craft DM-2W Manual

1 Januar 2025

Boss BC-1X Manual

16 December 2024

Boss Super Chorus CH-1 Manual

16 December 2024

Boss Bass Equalizer GEB-7 Manual

16 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Crestron CLCI-MCEX Manual

29 Juli 2025

Advantech EKI-2525SI Manual

29 Juli 2025

Advantech EIS-D210 Manual

29 Juli 2025

Panduit JMJH2-X20 Manual

29 Juli 2025

Advantech PCM-26D2CA Manual

29 Juli 2025

Advantech iDAQ-871 Manual

29 Juli 2025

Panduit SRBPBL Manual

29 Juli 2025

Advantech IPC-631 Manual

29 Juli 2025

Advantech ICR-2413 Manual

29 Juli 2025

Teslong WF150 Manual

29 Juli 2025