Boss Loop Station RC-300 Manual

Boss Ikke kategoriseret Loop Station RC-300

Læs gratis den danske manual til Boss Loop Station RC-300 (48 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Boss Loop Station RC-300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/48

* This device contains demo data (Phrase Memory 90–99).

Once you delete these, they cannot be recovered. Please back them up as described in “Backing up to your computer” (p. 37).

* With the factory settings, the RC-300’s power will automatically be switched oﬀ 10 hours after you stop playing or operating the unit.

If you want to have the power remain on all the time, change the “Auto O ” setting to “OFF” as described on “Auto O Settings” (p. 33).

The settings you were editing will be lost when the power is turned oﬀ . If you want to keep your settings, you must save your settings

before turning the power oﬀ .

Main Features

Welcome to the Loop Station!

The RC-300 is a pedal-type recorder that lets you record audio phrases from your guitar or vocal etc., and play them back by operating the pedal.

You can create a wide variety of performances by layering sound while you record and carry out play back in real time.

• You can save a maximum of approximately 3 hours of stereo sound (*total for all phrase memory) and up to 99 phrase memories.

• Three-track recording allows a wide range of performance possibilities.

• You can input audio in stereo.

• In addition to guitar (INST) input, a MIC input and AUX IN jacks are also provided. You can connect a microphone and loop-record your voice, or

record sound from your digital audio player.

• You can easily connect the RC-300 to your computer using a single USB cable. Once connected, you gain a digital audio connection with your

computer and the ability to export/import loop phrases (WAV  les) (p. 36).

• You can apply an e ect that is synchronized with the tempo of tracks while you play it back. You can use the EXP (expression) pedal to control

e ects (p. 28).

• Two RC-300 units can be synchronized after connecting them together using a MIDI cable (p. 39).

Owner’s Manual

Contents

Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Panel Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Top Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Turning On the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Overview of the RC-300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Basic Editing Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Selecting a Phrase Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Overdubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Loop Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Cancelling a Recording/Overdubbing (Undo/Redo/Track Clear) .12

Example of Actual Loop Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Recording on a Single Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Recording on Multiple Tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Saving a Phrase Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Saving a Phrase Memory (Write) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Copying a Track from Another Phrase Memory (Track Copy) . . . . .14

Exchanging Phrase Memories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Deleting a Phrase Memory (Initialize) . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Settings for Each Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Overview of the Playback Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Loop Playback Settings (Play Mode) . . . . . . . . . . . . . . . . . . . . . .16

Aligning the Beginning of Loop Playback (Loop Sync) . . . . .16

Synchronizing the Tempo (Tempo Sync) . . . . . . . . . . . . . . . . . .16

Specifying the Number of Measures in a Track (Measure) . .16

Playing Only a Single Track (Single Track Play) . . . . . . . . . . . . .16

Settings for Each Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Specifying How the Track Will Play (Play Mode) . . . . . . . . . . . .17

Playing a Track Backward (Reverse) . . . . . . . . . . . . . . . . . . . . . . .17

Specifying the Number of Measures in a Track (Measure) . .17

Specifying How the Track Will Stop (Stop Mode) . . . . . . . . . . .17

Adjusting the playback level of the Tracks (Play Level) . . . . .17

Adjusting the recording level of the Tracks (Recording

Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Adjusting the Positioning of the Track’s Sound (Pan) . . . . . . .18

Aligning the Beginning of Loop Playback (Loop Sync) . . . . .18

Synchronizing the Tempo (Tempo Sync) . . . . . . . . . . . . . . . . . .18

Assigning a Track’s Output Jacks (Output Select) . . . . . . . . . .19

Phrase Memory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Naming Phrase Memories (Memory Names) . . . . . . . . . . . . . .20

Adjusting the Phrase Memory Volume (Memory Level) . . . .20

Setting the Output Jacks for the Sounds Being Input

(Input Output Select) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Synchronizing the Tempo of Two RC-300 Units (MIDI Sync) 21

Setting the Overdubbing Method (Overdubbing Mode) . . .21

Switching Between Stereo and Mono (Recording Mode) . .21

Specifying a Phrase Memory’s Tempo . . . . . . . . . . . . . . . . . . . . .21

Adjusting the Time Used to Fade Out (Fade-Out Time) . . . . .21

Simultaneously Starting Recording When Sounds are

Input (Auto Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Playing Only a Single Track (Single Track Play) . . . . . . . . . . . . .22

Specifying how the Track will Switch (Track Change Mode) 22

Adjusting the Reverb Depth (Reverb Level) . . . . . . . . . . . . . . .22

Assigning the Function of Pedals and External Controllers

(Assign) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Enabling Assignments 1–8 (Assign Switch) . . . . . . . . . . . . . . . .23

Specifying the Assignment Target (Assign Target) . . . . . . . . .23

Specifying the Target Range (Target Range) . . . . . . . . . . . . . . .23

Specifying the Controller (Assign Source) . . . . . . . . . . . . . . . . .23

Specifying the Type of Operation (Source Mode) . . . . . . . . . .24

Connecting to External Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

About Rhythm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Sounding a Rhythm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Rhythm Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Selecting the Rhythm Sound (Rhythm Pattern) . . . . . . . . . . . .25

Selecting the Beat (Time Signature) for the Rhythm

Sound (Beat) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Playing a Count-In When Recording (Recording Count-In) .26

Playing a Count-In for Playback (Playback Count-In) . . . . . . .26

Stopping the Rhythm When the First Recording Ends

(Rhythm Stop) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Adjusting the Volume of the Rhythm Sound (Rhythm

Level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Setting the Output Jacks for the Rhythm Sound

(Rhythm Output Select) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Using LOOP FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Turning LOOP FX On/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

LOOP FX Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Specifying What LOOP FX Will Apply To (LOOP FX Target) . .28

Selecting the LOOP FX Category and Type (LOOP FX

Category, LOOP FX Type) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 44) and “IMPORTANT NOTES” (p. 45). These sections provide important information

concerning the proper operation of the unit.

Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s Manual should be read in its entirety. The manual

should be saved and kept on hand as a convenient reference.