Boss Reverb RV-500 Manual

Boss Ikke kategoriseret Reverb RV-500

Læs gratis den danske manual til Boss Reverb RV-500 (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Boss Reverb RV-500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Installing the Batteries . . . . . . . . . . . . . . . . . . 2

Connecting the Equipment. . . . . . . . . . . . . . . 2

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . 4

Adjusting the Reverb . . . . . . . . . . . . . . . . . . . 4

Adjusting the Delay . . . . . . . . . . . . . . . 5

Turning Reverb On/O . . . . . . . . . . . . . . . . . . 6

Switching Banks/Patches . . . . . . . . . . . . . . . . 7

Using the [TAP/CTL] Switch to Control the

Reverb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Editing a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Saving a Patch . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . 11

PATCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Parameters Common to All Modes . . . . 11

Parameters for Each Mode . . . . . . . . . . 12

CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

ASSIGN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

BANK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

MIDI PC MAP . . . . . . . . . . . . . . . . . . . . . . . . . 19

Convenient Functions . . . . . . . . . . . . . . . . . . . . 20

Specifying Whether to Carry-Over the Reverb

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Assigning the Functions of the [A], [B], and

[TAP/CTL] Switches . . . . . . . . . . . . . . . . . . . . 20

Using Two Patches Simultaneously

(Simul Mode) . . . . . . . . . . . . . . . . . . . 21

Assigning a Function to an External Pedal. . . . . 22

Synchronizing with a DAW or External MIDI

Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Connection Example . . . . . . . . . . . . . . . . . . . 24

MIDI Messages That Can Be Transmitted and

Received . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

MIDI Routing . . . . . . . . . . . . . . . . . . . . . . . . . 25

Restoring the Factory Default Settings . . . . . . . 26

Transmitting Data to an External MIDI Device . . 26

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 27

Main Specications . . . . . . . . . . . . . . . . . . . . . . 27

USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . 28

IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . 28

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY” and Owner’s Manual

(p. 28)). After reading, keep the document(s) including those sections where it will be available for immediate reference.

5Thanks to 32-bit high-precision processing at a 96 kHz sampling rate from input to output, the

RV-500 gives you stunningly high-quality reverb.

5With an easily readable screen and an independent [TAP/CTL] switch, it delivers both high

functionality as well as ease of use during live performances.

5A total of 12 types of reverb are provided, including classic varieties as well as “DUAL” which lets

you use two reverbs simultaneously, the sparkling “SHIMMER,” and models such as “Roland SPACE

ECHO RE-201” and “Roland DIGITAL REVERB SRV-2000.” Powerful DSP lets you use delay and

modulation simultaneously for all reverbs.

5The memory function lets you store and recall 297 dierent setups from internal memory.

“CARRYOVER” provides seamless transition that preserves the reverberant sound when switching

between patches.

5By connecting the RV-500 via a USB cable or MIDI cables, you can switch sounds and control

parameters in synchronization with your computer DAW or an external MIDI device.

Owner’s Manual

Getting Ready

Installing the Batteries

Install four alkaline batteries (AA, LR6) in the battery compartment located on the bottom of the

unit.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage.

Also, handle the unit carefully; do not drop it.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you

carefully observe all of the items related to batteries that are listed in “USING THE UNIT SAFELY”

and “IMPORTANT NOTES” (separate sheet “USING THE UNIT SAFELY” and Owner’s manual (p. 28)).

* We recommend that you keep batteries installed in the unit even though you’ll be powering it

with the AC adaptor. That way, you’ll be able to continue a performance even if the cord of the

AC adaptor gets accidently disconnected from the unit.

* “BATTERY LOW” will appear on the display if the batteries are low. Replace them with new ones.

Attaching the Rubber Feet

You can attach the rubber feet (included) if necessary.

Attach them in the locations shown in the illustration.

Connecting the Equipment

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all

the units before making any connections.

DC IN jack

Accepts connection of an AC Adaptor (PSA-S series; sold

separately). By using an AC Adaptor, you can play without

being concerned about how much battery power you have left.

* Use only the specied AC adaptor (PSA-S series; sold

separately), and connect it to an AC outlet of the correct

voltage. Do not use any other AC adaptor, since this may

cause malfunction.

* If the AC adaptor is connected while power is on, the power

supply is drawn from the AC adaptor.

USB (O) port

Use a commercially available

USB 2.0 cable to connect this

port to your computer.

You can synchronize with a

DAW via MIDI.

MIDI IN, OUT connectors

Connect an external MIDI

device here.

You can synchronize with

an external MIDI device

via MIDI.

MIDI device

Produkt Specifikationer

Mærke:	Boss
Kategori:	Ikke kategoriseret
Model:	Reverb RV-500

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss Reverb RV-500 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Boss Manualer

Boss SDE-3000EVH Manual

18 Juli 2025

Boss VE-22 Manual

25 Februar 2025

Boss SDE-3 Manual

23 Januar 2025

Boss Distortion DS-1X Manual

1 Januar 2025

Boss RC-505MK2 Manual

1 Januar 2025

Boss GM-800 Manual

1 Januar 2025

Boss Waza Craft DM-2W Manual

1 Januar 2025

Boss BC-1X Manual

16 December 2024

Boss Super Chorus CH-1 Manual

16 December 2024

Boss Bass Equalizer GEB-7 Manual

16 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025