Bretford PowerSync H3635 Manual

Bretford Oplader til mobilenhed PowerSync H3635

Læs gratis den danske manual til Bretford PowerSync H3635 (2 sider) i kategorien Oplader til mobilenhed. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Bretford PowerSync H3635, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Top of the cart with Grommet housing outlets for

the Mac Power Cord and USB Cable

Welcome …

Congratulations on the purchase of

your new PowerSync Cart for iPad

Use this Owner’s Manual to help you use of your

Bretford PowerSync Cart. Additional helpful

information can be found on:

bretford.com/apple

OWNER’S MANUAL

PowerSync Cart for iPad

H3635LL/A

General Use

• This cart is designed to allow you to easily store,  

secure, recharge, sync and transport up to 30

iPad devices and their host MacBook between

classrooms.

• Please read this Owner’s Manual carefully. It  

contains important advice concerning the use

and safety of your Bretford PowerSync Cart.

• Keep this Owner’s Manual in a safe place and  

pass it on to any subsequent user.

• This cart must only be used for its intended  

purpose in accordance with these operating

instructions.

11000 Seymour Avenue Franklin Park, IL 60131 USA 800 521 9614

bretford.com/apple

This product has been certified to UL 60950 Standards

for Information Technology Equipment

WARRANTY

Bretford Furniture

Twelve (12) years from date of shipment

Electrical Assemblies/Components

Two (2) years from date of shipment

Bretford engineers and manufactures its products to

provide dependable operation. Therefore, Bretford

Manufacturing, Inc. warrants that all products it

manufactures are at date of shipment free from defects

in material or workmanship. Any product which under

normal use fails to function within the time periods

specified below and found defective in material or

workmanship by the Company’s inspection will be

repaired or replaced without charge to the buyer or, at

the election of Bretford Manufacturing, Inc., a credit will

be allowed up to the invoice purchase price of the

product.

This warranty is inapplicable where, in the judgment of

Bretford Manufacturing, Inc., the defect is attributable to

normal wear, misapplication, abnormal use, misuse,

modification or damage after shipment, including

damage caused by the buyers failure to properly

maintain, or other similar cause.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY

OTHER EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING ANY ORDINARY OR PARTICULAR

PURPOSE. THERE ARE NO WARRANTIES WHICH

EXTEND BEYOND THE DESCRIPTION ON THE FACE

HEREOF.

Capacity

• Holds and charges and syncs up to 30 Apple iPad devices  

Size & Weight

• Overall: 33”W x 24”D x 37”H”  

• Compartments: 1”W x 9.5”H x 12”D  

• Top Interior Shelf: 17.5”W x 13”D  

• Carton Pack: 48”W x 32”D x 42”H  

• Ship Weight: 200 lbs.  

• Actual Product Weight: 168 lbs.  

• Ships by truck in one carton pack  

Assembly

• Ships already assembled in one pack (no assembly required)  

POWERSYNC CART FOR iPAD

Model # H3635LL/A

Technical Specifications:

Unleash the Power Cord

The 9-foot Power Cord is wound around

the built-in cord winder on the right side of

the cart. To power the cart, simply unwind

the Power Cord and plug into a standard

15 amp circuit outlet that is dedicated to

the use of this cart. Proper use of the cart

is predicated on its being the only

appliance on the circuit.

Assembly Instructions

Always Turn Off the Power to the

Cart before Plugging In Or Out!

Setting the Combination Locks

Part # 031-8631

JAF 02.04.11

For optimal performance,

you must set-up

your iPad devices

using the configuration

on back of this User’s Guide.

ATTENTION:

Using PowerSync Cart for iPad Devices

The PowerSync Cart enables you to take music, videos, podcasts, photos and other content files in

your iTunes library on your Mac and sync your selected content across 30 iPad devices at a time.

Getting Started …

Step 1

Configure iTunes

for use with PowerSync Cart

By default, iTunes will automatically

check for new software updates,

including available updates for iTunes

& any attached iPads. This feature,

however, can often interfere with

syncing multiple iPads. To prevent

iTunes from automatically checking

for updates, Choose “Preferences…”

from the iTunes menu, and on the

“General” pane, deselect “Check for

new software updates automatically”.

iPad

Step 2

Configure each iPad Device

for use with PowerSync Cart

NOTE: iPad devices will not charge and sync at the same time!

Each laser-numbered slot comes pre-wired

with a 30-pin connector, ready to use

Lifting off the Grommet

Cover reveals a power

outlet for the MacBook

and the outlet for the

USB Cable

Your new PowerSync Cart comes equipped

with a re-settable Combination Padlock.

The lock starts with 0-0-0-0. Follow the

directions with the lock for changing the

combination. Remember to depress

the shackle before un-engaging it

from the lock.

Dock & Lock

Your new cart comes equipped with a security cable,

wall bracket & combination lock for securing the cart to the wall.

Anchors and directions included in Plastic Accessory Box.

Step 3

Step 3 Step 3

Sync iPad devices using the PowerSync Cart

1. Once you have created the content & organized your

playlists within iTunes, and set-up each individual iPad

device per the instructions on the back of this User’s

Guide, please start with the following configuration:

• Each iPad Device is connected inside the cart

• Mac is “ON” with no applications running

• PowerSync Cart is plugged into wall and

Switch is in “OFF” position.

2. Connect the USB Cable to the port inside the top

grommet of the cart to your Mac.

Note: USB 2.0 port on your Mac is required.

Turn main Power Switch on back of cart to “ON” position. 3.

4. Launch iTunes & wait until your Mac shows each iPad.

Note: This may take a few moments to complete.

Each iPad device will automatically appear in iTunes &

begin syncing. The spinning wheel to the right of each

iPad device indicates that syncing is in progress.

Sync is complete when spinning wheel disappears.

Once the Sync Process is complete, eject each iPad 5.

device or simply close iTunes to eject all at once.

Unplug the USB Cable from your Mac. 6.

Then the iPad devices will charge. (Step 4 on back)

Step 4

Step 4 Step 4

Store & Charge iPad devices using

the PowerSync Cart ... next page

ELECTRICAL

• Avoid sparks. Avoid arcing. Always turn OFF the power to the

cart before plugging IN or OUT!

• Be sure each device is turned OFF before plugging into the cart.

• For Safety Purposes, make sure all electrical components do not  

exceed the the maximum load rating of 12 amps.

• Risk of electrical shock. Do not plug the power cord into another  

extension cord or relocatable power tap.

• The Power Module inside the cart are only for charging & syncing  

Apple iPad devices, only.

• Do not unplug this product from the outlet when your hands are wet.  

• Do not move the cart by pulling the power cord.  

• Do not plug the unit in if the switch, receptacle(s) or power cord has  

been damaged.

• Contact Bretford or a qualified electrician before attempting to make  

any type of electrical repair or parts replacement.

• Before moving this cart from one room to the next, wrap the power  

cord around the cord winder located on the side of the cart.

CAUTION

• Ventilation is critical for PowerSync carts to operate correctly,  

providing the appropriate airflow so that heat-buildup is minimized

during the battery-charging / syncing process.

• Do Not block the ventilation holes on the cart. Proper air flow is  

required for safe operation of equipment.

• Cart with iPad devices should be keep in a room with a maximum  

temperature not to exceed 104° F or 40° C.

• Maximum weight of accessories on top of cabinet is 25 pounds. Do  

not block ventilation holes when charging batteries.

• Avoid loading equipment in the cart in a uneven fashion. Uneven  

weight distribution could cause a hazardous condition.

• This cart is not designed to be operated by a child or student. Adult  

operation and supervision is recommended at all times.

•  Move cart slowly.

•  No TV/Monitor to be used on top of cart.

• Although this cart is designed to support the transport of equipment  

within a school campus, it is not designed for outdoor use.

• Liquids should not be stored in, set on or placed inside this unit.  

• Do not pull cart. Push the cart using the ergonomic handles.  

• Engage locking casters when cart is not in transit.  

• Use extra caution on ramps and thresholds.  

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1 This device may not cause harmful interference.

2 This device must accept any interference received, including

interference that may cause undesired operation.

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

11000 Seymour Avenue Franklin Park, IL 60131 USA 800 521 9614

bretford.com/apple

OPEN

30-pin Connector

Cables Pre-Installed

hang directly in the slot &

minimize cable clutter

12 Year Warranty

on the Cabinet

2 Year Warranty

on Electrical

Ships 100%

Assembled

LED Lights

on the top and back

of the cart let you

know what is going

on inside the cart

Directional

Locking Casters

can be locked as a

rigid caster for easy

rolling down the

hallway, unlocked to

swivel for easily getting

into tight spaces Security

Front doors 3-point

locking system with

programmable

combination padlock

Ventilation

Channels allow

maximum air

flow in the cart

Compact Design

Although this cart can store & power

up to 30 iPad devices, the exclusive

quiet-glide casters and compact size

make it very easy to move around

Auxiliary Outlet

for Host computer

inside the top

grommet

One Power Cord

Exits the cart & plugs

into the wall outlet

POWERSYNC CART FOR iPAD

H3635LL/A

Storage Tub

Inside for extra

cables & connectors

CLOSED

Laser

Numbered

Slots

help identify the

devices & assist

in asset

management

Step 4

Step 4 Step 4

Store & Charge iPad devices using the

PowerSync Cart

1. Insert each iPad device into a slot and attach the 30-pin

dock connector.

NOTE: the orange Bretford logo should face up on the same side

as iPad device screen.

Plug in Power Cord from the right side of the cart. 2.

Turn main Power Switch on back of cart to “ON” position. 3.

NOTE: PowerSync Cart will charge up to 30 iPad devices

NOTE: For best results with new iPad devices, charge for about

4 hours or until the iPad device displays a charged battery.

Please follow these instructions for used each iPad device

with your PowerSync Cart:

Connect each iPad, one at a time, to the Mac you will 1.

be using with the PowerSync Cart.

If iTunes does not open automatically, 2. open iTunes

& select your iPad device.

If prompted, complete the naming and registration 3.

process.

Select the Summary tab for your iPad device. 4.

In the 5. Options section:

Enable “Open iTunes when this iPad is attached” (This

(This not only activates iTunes, but begins the

syncing process.)

Enable “Sync only checked songs & videos” ” (This

(This allows for greater control of synced media.)

Disable “Manually manage music & videos” (Enabling

(Enabling this will require that you manually drag

media to this particular iPad.)

In the remaining tabs, select the media and playlists 4.

you wish to sync with this iPad device.

Click the Sync or Apply button. 5.

(The Sync button changes to Apply & Cancel buttons

when you make a change to the sync settings.)

Repeat these steps with each iPad device in your

collection

Configuring an iPad device for use with PowerSync Cart

NOTE: iPad devices will not charge and sync at the same time!

LED Charging Indicator Lights

LED Lights on TOP of Cart

3 lights - 1 for each section of 10 iPads - glow

amber when charging, turn green when charged

LED Lights on BACK of Cart

1 light for each iPad, shown in sequence per the layout in the

cart for easy identification. Amber charging. Green charged.

Produkt Specifikationer

Mærke:	Bretford
Kategori:	Oplader til mobilenhed
Model:	PowerSync H3635

Har du brug for hjælp?

Hvis du har brug for hjælp til Bretford PowerSync H3635 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Oplader til mobilenhed Bretford Manualer

Bretford Core X Manual

29 August 2024

Bretford TVC32PAC-CK Manual

29 August 2024

Bretford Cube TVC16PAC Manual

29 August 2024

Bretford Cube TVCM20PAC Manual

29 August 2024

Bretford Ever T45CD-P-DC-US Manual

29 August 2024

Bretford T30CD-P-AC-US Manual

29 August 2024

Bretford Core 10S Manual

29 August 2024

Bretford PowerSync H3635 Manual

29 August 2024

Bretford Cube TVC36PAC Manual

29 August 2024

Bretford MDMTAB30 Manual

29 August 2024

Oplader til mobilenhed Manualer

Nyeste Oplader til mobilenhed Manualer

Leba NoteBox 16 Manual

1 April 2025

MOOOV 733405 Manual

14 Marts 2025

MOOOV 732741 Manual

14 Marts 2025

Sitecom CH-1104 Manual

11 Marts 2025

Sitecom CH-1102 Manual

11 Marts 2025

Conceptronic ALTHEA22W100 Manual

10 Marts 2025

Conceptronic ALTHEA21W65 Manual

10 Marts 2025

Insignia NS-PW370C2W25 Manual

26 Februar 2025

Xuma UCAC-448U Manual

20 Februar 2025

Act AC2005 Manual

20 Februar 2025