
Unpack the machine and check the components
Toner Cartridge and Drum Unit 
Toner Cartridge Replacement
Remove the packing materials and install the toner cartridge and drum unit assembly
Load paper in the paper tray
Connect the power cord and turn the machine on
Before connecting the power cord, locate the Serial Number 
label on the back or side of the machine. Record this number 
for product registration and warranty support.
• The components included in the box may differ depending on your 
• The available connection interfaces vary depending on the model.  
If you use a wired connection, you must purchase the correct cable for 
the interface you want to use.
We recommend using a USB 2.0 cable (Type A/B) that is no more 
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The screens and images in this   show the Quick Setup Guide
• Brother aims to reduce waste and save both raw materials and the 
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
Select your country/language  
After turning the machine on, you may be required 
to set your country or language (depending on your 
If required, follow the on-screen instructions.
Remove the protective tape or film covering the machine and the supplies.
Read the   for the correct installation procedure.Product Safety Guide Quick Setup Guidefirst,thenreadthis
Not all models are available in all countries.
The latest manuals are available at the Brother support website: 
support.brother.com/manuals
DCP-L2600D / DCP-L2620DW / DCP-L2622DW / DCP-L2625DW / DCP-L2627DW /  
DCP-L2627DWXL / DCP-L2627DWE / DCP-L2640DN / DCP-L2660DW / DCP-L2665DW / MFC-L2802DN /  
MFC-L2800DW / MFC-L2802DW / MFC-L2827DWXL / MFC-L2827DW / MFC-L2835DW / MFC-L2860DWE /  
MFC-L2860DW / MFC-L2862DW / MFC-L2886DW / MFC-L2922DW