Bxterra BG550 Manual

Bxterra UPS BG550

Læs gratis den danske manual til Bxterra BG550 (5 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Bxterra BG550, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

USER MANUAL

www.bxterra.com

BG STANDBY UPS

BG 550 | BG450

1 2

WARRANTY & REGISTRATION

SAFETY INSTRUCTIONS

This bXterra product is constructed to provide unmatched power protection, quality and perfor-

mance for the duration of its lifetime. Please take a few minutes to register your new product at

www.bXterra.com/registration. Registration certies your product’s warranty, conrms your owner-

ship in the event of a product loss or theft and entitles you to free technical support. Please register

your product now to receive the benets of bXterra ownership.

SAVE THESE INSTRUCTIONS: This manual

contains important instructions that should be

followed during installation and maintenance of

the UPS and its batteries.

1. This unit is intended for installation in a

controlled environment (a temperature-

controlled and indoor area free of conductive

contaminants). Please avoid installing the

UPS in locations where there is standing

or running water, dust, direct sunlight or

excessive humidity.

2. This UPS utilizes voltage that may be

hazardous. Do not attempt to disassemble

the unit. Only factory service personnel may

perform repairs.

3. Connect your UPS directly to a properly-

grounded AC power outlet with fuse or

circuit breaker protection. Do not plug the

unit into an outlet that is not grounded.

Turn o and unplug the unit if you need to

de-energize it.

4. Not for use in a computer room as dened in

the Standard for the Protection of Electronic

Computer/Data Processing Equipment, ANSI/

NFPA 75.

5. To reduce the risk of re, connect only to a

circuit provided with 20 amperes maximum

branch circuit over current protection in

accordance with the National Electric Code,

ANSI/NFPA 70.

6. For best performance, keep the indoor

temperature around the unit between 32⁰ F

and 104⁰ F (0⁰ C and 40⁰ C).

7. Do not attach medical equipment or non-

computer related items, such as life-support

equipment, microwave ovens, or vacuum

cleaners to the UPS. bXterra does not sell

equipment meant for life-support or medical

applications. Visit our website for more

information about devices appropriate to

plug into this UPS.

8. Only stand or set up the UPS in the direction

specied in the Installation and Operation

section of this manual. Do not block fans and

leave adequate space around all sides of the

UPS for proper ventilation. Do not expose

the unit to direct sunlight and do not install

the unit near heat-emitting appliances such

as a space heater or furnace. This could

negatively impact the unit’s internal cooling

system and cause product damage not

covered under warranty.

9. Do not plug the UPS input into its own

output. Do not attach a power strip or surge

protector to the UPS.

10.Do not modify the UPS’s plug and do not

use an adapter that would eliminate the

UPS’s ground connection.

11.Do not use extension cords to connect the

UPS to an AC outlet.

12.If the UPS receives power from a motor-

powered AC generator, the generator must

provide clean, ltered, computer-grade

output. Consult your generator’s manual to

see if it meets these specications.

13.The main power outlet that supplies the

UPS should be easily accessible and near

the UPS.

14.To reduce the risk of re or electric shock,

do not use the unit on any transportation

such as airplanes or ships. The eect of

shock or vibration caused during transit and

the damp environment can cause the unit

to short out.

Battery Warnings:

Batteries can carry a risk of electric shock and

burn from high short-circuit current. There

are no user-serviceable parts inside the UPS,

except for the battery.

· Do not open the UPS except to perform

battery replacement

· Remove watches, rings or any metal objects

· Wear rubber gloves and boots

· Do not open or mutilate batteries. Released

electrolytes may be harmful to skin and

eyes.

· Do not short or bridge the battery terminals

with any object

· Unplug and turn o the UPS before

performing battery replacement

· Use tools with insulated handles

· Remove battery grounds during installation

and maintenance to reduce likelihood of

shock. Remove the connection from ground

SAFETY INSTRUCTIONS CONTINUED

INSTALLATION & OPERATION

if any part of the battery is determined to be

grounded.

· Do not lay tools or metal parts on top of

batteries.

Battery replacement should be performed

following all safety precautions and using the

same number and type of batteries (sealed

lead-acid).

Do not dispose of batteries in a re.

Please recycle your batteries. Refer to local

regulations for disposal requirements or if you

are in the USA please call 1-877-723-1297 or

visit www.call2recycle.org for more information

about recycling your batteries.

INTRODUCTION

Thank you for choosing a bXterra

Uninterruptible Power Supply. This UPS

system is Energy Star®-certied and uses our

GreenTech™ High-Eciency Design to consume

less power, reduce heat and improve UPS

operation.

INSPECTION

Inspect your UPS upon purchase. The following

items should be inside:

• UPS system • User manual • USB A+B

cable

Remove the UPS from its package and inspect

it for damage that may have occurred during

shipping. If any damage is discovered, re-pack

the unit and return it to the place of purchase.

Determine the Power Requirements of Your

Equipment

1. To determine the power requirements of

your equipment, ensure that the equipment

plugged into the outlet does not exceed the

UPS’s rated capacity. If the rated capacity of

the unit is exceeded, the UPS may overload

and shut down or the circuit breaker may

trip.

2. There are many factors that can aect the

amount of power that your equipment will

require. We suggest that the load placed on

the battery outlets not exceed 80% of the

UPS’s capacity.

CONNECT TO UTILITY POWER

Connect the AC power cord to utility power.

The UPS will start to charge its internal

battery. For best results, charge the battery

for six hours prior to initial use. When the

UPS is plugged into an AC outlet, the battery

will automatically charge whether the UPS is

turned on or not.

PLUG IN EQUIPMENT

Battery Backup Outlets

With the UPS turned o and unplugged,

connect equipment requiring battery backup

to the “Battery Backup” outlets. These outlets

provide battery backup, EMI ltering, line

conditioning, and surge protection. Battery

power is automatically provided in case of

power failure.

Surge-Protected Outlets

Connect other devices requiring surge

protection to the “Surge Protected” outlets.

These outlets do not provide power during

power failure.

DO NOT plug a laser printer, paper shredder,

copier, space heater, vacuum cleaner, sump

pump or other large electrical device into the

UPS. The power requirements of these devices

will overload and possibly damage the UPS.

Connect Modem/Phone Line

This UPS protects a single line (1 in/1 out)

phone, modem, or fax machine from surges.

To protect a fax machine, phone or modem,

connect a telephone or network cable from

the wall jack outlet to the IN jack of the UPS.

Connect a telephone cable or network cable

from the OUT jack of the UPS to a fax machine,

telephone, modem or network device.

TURN THE UPS ON

To turn on the UPS unit, press the power switch

for at least two seconds. The LED indicators

will light up. If an overload is detected, the UPS

alarm will go o and the unit will emit one long

beep. To x this, turn the UPS o and unplug at

least one piece of equipment from the battery-

power supplied outlets. Make sure the Circuit

Breaker button is depressed and turn the UPS

on again. To turn o the UPS unit, press the

power switch again. The LED light will turn o.

MUTE ON/OFF

Press the mute button to turn an alarm on

or o. For more information about the mute

button, please refer to the LED indicators.

INSTALL SOFTWARE

Connect one end of the USB cable to a PC and

the other end to the USB port at the rear of the

UPS.

Produkt Specifikationer

Mærke:	Bxterra
Kategori:	UPS
Model:	BG550

Har du brug for hjælp?

Hvis du har brug for hjælp til Bxterra BG550 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

UPS Bxterra Manualer

Bxterra SP3000LCDRT2U Manual

30 August 2024

Bxterra BM1000AVRLCD Manual

30 August 2024

Bxterra SP1500LCDRTXL2U Manual

30 August 2024

Bxterra MODBUS-110 Manual

30 August 2024

Bxterra SNMP-RC210 Manual

30 August 2024

Bxterra BM850LCD Manual

30 August 2024

Bxterra BM750LCD Manual

30 August 2024

Bxterra BG350 Manual

30 August 2024

Bxterra SP1000LCDRT2U Manual

30 August 2024

Bxterra BG450 Manual

30 August 2024

UPS Manualer

Nyeste UPS Manualer

APC RBC150 Manual

2 April 2025

APC RBC151 Manual

2 April 2025

APC Symmetra LX 4kVA Manual

30 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Teltonika BAT120 Manual

30 Januar 2025

APC BX1000M Manual

30 Januar 2025

APC BX850 Manual

30 Januar 2025