Canarm BI-12RM Manual

Canarm Emhætte BI-12RM

Læs gratis den danske manual til Canarm BI-12RM (4 sider) i kategorien Emhætte. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Canarm BI-12RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

BI_BIRM_UserGuide Page 1 of 4

BI SERIES – UTILITY BLOWERS

Operation Instructions & Parts Manual

MODELS: BI-10 – BI-36; BI-10RM – BI-36RM

READ AND SAVE THESE INSTRUCTIONS

GENERAL SAFETY

Rotating parts on fans should not be exposed. cabinets Where these components are not protected by ductwork, or

covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be

opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful

inspection should be carried out to ensure no foreign material is present which could become airborne in the system.

Read carefully or installation and operation instructions before attempting to install, operate service Canarm/Delhi

BI/BI –RM series blowers. Failure to comply with instructions could result in personal injury and/or property damage.

UNIT DESCRIPTION

Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a

backwardly inclined (BI) blade configuration to generate air moving performance. The BI iser es are single inlet blowers,

which have a standard CCW rotation and bottom horizontal discharge. The discharge direction may be easily altered to

any one of eight positions without removal of venturi the wheel or housing.

Complete access for motor and drive installations and servicing may be completed by partial removal of the drive

compartment cover assembly. Pre-lubricated ball bearings, motor adjustment hardware and a dynamically balanced

wheel are standard equipment. Operating temperature range is - 65 to 220 deg. F.

UNIT DESCRIPTION

Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate

the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi

to establish clearance, re-tighten bolts.

FIGURE 1

Produkt Specifikationer

Mærke:	Canarm
Kategori:	Emhætte
Model:	BI-12RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Canarm BI-12RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Emhætte Canarm Manualer

Canarm ALX120-DD Manual

9 Januar 2026

Canarm IDB09 Manual

9 Januar 2026

Canarm DSQ-B-12 Manual

9 Januar 2026

Canarm ALX105-UD Manual

8 Januar 2026

Canarm ALX135-UD075S Manual

8 Januar 2026

Canarm DSQ-B-10 Manual

8 Januar 2026

Canarm ALX165-UB Manual

7 Januar 2026

Canarm DSQ-B-22 Manual

7 Januar 2026

Canarm ALX135-DD Manual

7 Januar 2026

Canarm IDB10 Manual

7 Januar 2026

Emhætte Manualer

Nyeste Emhætte Manualer

Kernau BKTH 0952 B Manual

9 Januar 2026

Ikea KULINARISK 304.432.04 Manual

9 Januar 2026

Kernau BKBH 0552 B Manual

8 Januar 2026

Bosch DWB63BC30 Manual

8 Januar 2026

Kernau KBH 0345 B Manual

8 Januar 2026

Bosch DBB97DP60 Manual

8 Januar 2026

Valberg TSH 60 T X 756C Manual

8 Januar 2026

Kernau BKBH 0962 B Manual

8 Januar 2026

Bosch DBB95CC60 Manual

7 Januar 2026

Kernau BKTH 0962 B Manual

7 Januar 2026