Canarm BI-22RM Manual

Canarm Ventilator BI-22RM

Læs gratis den danske manual til Canarm BI-22RM (4 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Canarm BI-22RM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

BI_BIRM_UserGuide Page 1 of 4

BI SERIES – UTILITY BLOWERS

Operation Instructions & Parts Manual

MODELS: BI-10 – BI-36; BI-10RM – BI-36RM

READ AND SAVE THESE INSTRUCTIONS

GENERAL SAFETY

Rotating parts on fans should not be exposed. Where these components are not protected by ductwork, cabinets or

covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be

opened with the fan operating to avoid foreign objects being drawn into the system. On initial start-up a careful

inspection should be carried out to ensure no foreign material is present which could become airborne in the system.

Read installation and operation instructions carefully before attempting to install, operate or service Canarm/Delhi

BI/BI –RM series blowers. Failure to comply with instructions could result in personal injury and/or property damage.

UNIT DESCRIPTION

Canarm/Delhi BI series blowers are specifically designed as a quiet and efficient blower. The BI series incorporates a

backwardly inclined (BI) blade configuration to generate air moving performance. The BI series are single inlet blowers,

which have a standard CCW rotation and bottom horizontal discharge. The discharge direction may be easily altered to

any one of eight positions without removal of the wheel venturi or housing.

Complete access for motor and drive installations and servicing may be completed by partial removal of the drive

compartment cover assembly. Pre-lubricated ball bearings, motor adjustment hardware and a dynamically balanced

wheel are standard equipment. Operating temperature range is - 65 to 220 deg. F.

UNIT DESCRIPTION

Inspect unit for damage and report any shipping damage to carrier. Check all fasteners and re-tighten as required. Rotate

the blower wheel by hand to ensure free rotation. If rubbing occurs, loosen the inlet venturi bolts, re-position the venturi

to establish clearance, re-tighten bolts.

FIGURE 1

Produkt Specifikationer

Mærke:	Canarm
Kategori:	Ventilator
Model:	BI-22RM

Har du brug for hjælp?

Hvis du har brug for hjælp til Canarm BI-22RM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ventilator Canarm Manualer

Canarm P20-1M Manual

17 September 2025

Canarm SXB42CBD10300 Manual

17 September 2025

Canarm BI-16RM Manual

17 September 2025

Canarm ALX135-UD033EC Manual

17 September 2025

Canarm BI-22RM Manual

17 September 2025

Canarm ALX150-UD050EC Manual

17 September 2025

Canarm BI-24RM Manual

17 September 2025

Canarm ALX165-DD033EC Manual

16 September 2025

Canarm XFS20 Manual

26 August 2025

Canarm AX24-4 Manual

26 August 2025

Ventilator Manualer

Nyeste Ventilator Manualer

Soler & Palau CRVB-N Manual

1 November 2025

Toshiba F-DSD40XMYW Manual

1 November 2025

Tornado EFS-95SR Manual

1 November 2025

Soler & Palau CTB Manual

1 November 2025

Tornado TWF-16 Manual

1 November 2025

Dimplex DCPF40CPT Manual

1 November 2025

Tornado TWF-18G Manual

1 November 2025

Tornado TWF-30 Manual

1 November 2025

Tornado TCF56H Manual

31 Oktober 2025

Toshiba F-DSC80XMYW Manual

31 Oktober 2025