Canon Extender RF 2x Manual

Canon Linse adapter Extender RF 2x

Læs gratis den danske manual til Canon Extender RF 2x (2 sider) i kategorien Linse adapter. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Canon Extender RF 2x, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Nomenclature

① Mount index (lens side)

② Mount index (camera side)

③ Lens release lever

④ Rubber ring

Thank you for purchasing a Canon product.

The Canon Extender RF1.4x and Extender RF2x increase the focal

length of the attached RF lens by 1.4x and 2x respectively.

When Extender RF1.4x is attached, the lens maximum aperture will be

smaller (darker) by 1 stop. With Extender RF2x, the maximum aperture

will be smaller by 2 stops. In any case, the camera will compensate the

exposure automatically.

Caution Details pertaining to risks that may result in injury or

damage to other objects.

● Do not leave the product in places exposed to extremely high

or low temperatures. The product may cause burns or injury when

touched.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise

specified in the instructions. If such changes or modifications should be made, you

could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B) / NMB-3 (B)

■ Attaching and Detaching the Extender

First attach the Extender to the lens, then attach it to the camera.

To detach it, follow the same procedure in reverse.

To detach the Extender from the lens, slide the lens release lever and

then turn the Extender counterclockwise.

■ Safety Precaution

z Do not leave the product in excessive heat such as in a car in direct

sunlight. High temperatures can cause the product to malfunction.

z You cannot attach two or more Extenders on the same camera.

z The rear mount on the Extender has been fitted with a rubber ring

to improve dust-resistance and water-resistance performance. This

rubber ring may cause friction marks to appear around the camera’s

lens mount, although this will have no effect on usage. Rubber rings

can be replaced at Canon Service Center (chargeable).

z Using the Extender may limit the minimum shooting length possible

according to the product’s specifications.

z Autofocusing slows down when the lens is used with the Extender, in

order to maintain the precision of autofocus control.

■ Usable RF Lenses

RF600mm F11 IS STM

RF800mm F11 IS STM

RF100-500mm F4.5-7.1 L IS USM

■ Specifications

Mount: Canon RF mount

Lens construction: RF1.4x: 7 elements in 4 groups

RF2x: 9 elements in 5 groups

Dimensions (Max. dia. x length):

RF1.4x: Approx. 71.2 dia. x 20.3 mm / 2.8 x 0.8 in.,

RF2x: Approx. 71.2 dia. x 39.3 mm / 2.8 x 1.5 in.

Weight: RF1.4x: Approx. 225 g / 7.9 oz.,

RF2x: Approx. 340 g / 12.0 oz.

Case: LP811

Front Cap: Extender Cap RF

Rear Cap: Lens Dust Cap RF

• The maximum diameter, length and weight listed are for the Extender itself

only.

• All data listed is measured according to Canon standards.

• Product specifications and appearance are subject to change without

notice.

CT1-B085-A

1119Ni © CANON INC. 2019

Extender

RF1.4x / RF2x

Instructions

ENG

③

①

②

④

Produkt Specifikationer

Mærke:	Canon
Kategori:	Linse adapter
Model:	Extender RF 2x

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon Extender RF 2x stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Linse adapter Canon Manualer

Canon EF-EOS R 0.71x Manual

14 December 2024

Canon Extender RF 2x Manual

23 Juli 2024

Linse adapter Manualer

Nyeste Linse adapter Manualer

Sigma UD-01 Manual

30 December 2025

Fujifilm XF2X TC WR Manual

7 Oktober 2024

Fujifilm XF1.4X TC WR Manual

14 September 2024

Fotodiox FD Lens Adapter Manual

3 September 2024

Kenko 607022 Manual

29 August 2024

Kenko 607039 Manual

29 August 2024

Kenko 607046 Manual

29 August 2024

Hasselblad 3043500 Manual

26 August 2024

Vello LA-SA-T Manual

21 August 2024

Vello LA-CEF-CFD Manual

20 August 2024