Canon imageFORMULA CR-190i II Manual

Canon Scanner imageFORMULA CR-190i II

Læs gratis den danske manual til Canon imageFORMULA CR-190i II (63 sider) i kategorien Scanner. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Canon imageFORMULA CR-190i II, eller vil du spørge andre brugere om produktet?

Side 1/63
Please read this manual before operating this scanner.
Instructions
2
Connecting the Scanner to a Computer
Connect the CR-135i II/CR-190i II to a computer as follows. Make sure
to install the software before connecting the scanner to a computer.
If you connect the computer and turn ON the CR-135i II/CR-190i II
before installing the software, the following wizard screen appears. If
this happens, click [Cancel], turn OFF the CR-135i II/CR-190i II, and
then install the software.
The following wizard screen is an example in Windows 7. When a
similar wizard screen appears in Windows 8.1/10, click [Cancel].
AInstall the software
Install the Scanning Utility for CR-135i/CR-190i in the setup disc
provided with the CR-135i II/CR-190i II. (See “Installing the
Software,” on p. 18.)
BConnect the scanner to a computer
Connect the CR-135i II/CR-190i II and the computer with a USB.
(See “Connecting the Scanner to a Computer,” on p. 19.)
CTurn ON the power
Turn ON the power of the CR-135i II/CR-190i II. (See “Turning ON
the Power,” on p. 20.)
DAutomatically installing the device driver
The device driver is installed automatically when Windows
recognizes the CR-135i II/CR-190i II as new hardware. (See
p. 21.)
Wizard Screen (Windows 7)


Produkt Specifikationer

Mærke: Canon
Kategori: Scanner
Model: imageFORMULA CR-190i II

Har du brug for hjælp?

Hvis du har brug for hjælp til Canon imageFORMULA CR-190i II stil et spørgsmål nedenfor, og andre brugere vil svare dig