Car Keys Express Simple Key Programmer & Key Fob Manual

Car Keys Express Ikke kategoriseret Simple Key Programmer & Key Fob

Læs gratis den danske manual til Car Keys Express Simple Key Programmer & Key Fob (21 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Car Keys Express Simple Key Programmer & Key Fob, eller vil du spørge andre brugere om produktet?

Side 1/21
USER GUIDE
Pairing Instructions for Chrysler, Dodge,
Jeep Fobik Replacement Keys
V3.0223
Packaging Part Number: CDPBA-7000
www.CKESimpleKey.com
Powered By
SIMPLE KEY USER GUIDE
2
IMPORTANT NOTES
You MUST have at least one existing key that already works with
your vehicle in order to use the EZ Installer™. If you have no working
keys, return the Simple Key to the retailer where it was purchased.
The emergency key blade should be cut at your convenience. This
key blade is inside the new Simple Key and can be used to unlock
the doors should the battery in the Fobik fail. It can be cut at any
local hardware store.
Vehicle battery should be in good condition and fully charged
prior to pairing the new key. Turn o headlights, radio, A/C fan,
etc. to minimize battery draw during the process.
Do not use the EZ Installer while the vehicle is in motion. Unplug
it from the OBD port before driving the vehicle.
Only original remote features will work, regardless of buttons
included on the Simple Key. This key does not add remote features
that your vehicle did not have before.
For your security, a tamper-evident security label is installed over
the EZ Installer connector. If this label is missing, damaged, or the
word “VOID” appears on the EZ Installer, please exchange this
Simple Key for a new one at the retailer where it was purchased.
Before pairing, familiarize yourself with the Simple Key’s
compatibility with the make, model, and year of your vehicle on
page 3.
LET’S GET STARTED
Simple Key requires two steps: “ACTIVATION” and “PAIRING.” It is
important to follow these steps in order to successfully complete setup.
If you skip a step, the key WILL NOT work properly, and you’ll have to
repeat the setup process.
Find your ACTIVATION CODE in the following chart by referencing your
vehicle’s make, model, year and the button configuration of your
key’s remote.
Note: If you have a push-to-start vehicle, this key will not pair correctly.
This product is for vehicles you need to turn the key to start.


Produkt Specifikationer

Mærke: Car Keys Express
Kategori: Ikke kategoriseret
Model: Simple Key Programmer & Key Fob

Har du brug for hjælp?

Hvis du har brug for hjælp til Car Keys Express Simple Key Programmer & Key Fob stil et spørgsmål nedenfor, og andre brugere vil svare dig