Casio Baby-G BG-1001 Manual

Casio Ur Baby-G BG-1001

Læs gratis den danske manual til Casio Baby-G BG-1001 (3 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Casio Baby-G BG-1001, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Operation Guide 3035

MA0604-EA

About This Manual

• All of the displays in this manual show black on white.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode World Time Mode Stopwatch Mode Alarm Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Hour : Minutes Seconds

PM indicator

Day of week

Day

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date. You can also use the preset timer in the

Timekeeping Mode.

• See “Preset Timer” for information about using the

preset timer.

Read this before you set the time and date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a city code for your Home City (the city where you

normally use the watch) before you set the time and date.

• To view the current Home City code setting, press A

while in the Timekeeping Mode.

• For full information on city codes, see the “City Code

Table”.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds DST Hour Minutes

Year 12/24-Hour FormatDay

City Code

Month

3. When the setting you want to change is flashing, use D and B to change it as

described below.

Screen Do this:

Press .D

Use D (east) and B (west).

Press .D

Use ).D (+) and B (–

Press .D

Use ).D (+) and B (–

To do this:

Reset the seconds to

Change the city code

Toggle between Daylight Saving Time ( )

and Standard Time ( )

Change the hour or minutes

Toggle between 12-hour ( ) and 24-hour

( ) timekeeping

Change the year, month, or day

• See “Daylight Saving Time (DST) for details about the DST setting.”

4. Press A to exit the setting screen.

• Resetting the seconds to while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to without changing the minutes.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the (AM) indicator appears for times in the rangeA

of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch s battery replaced.’

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

On/Off status

DST indicator

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C twice to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time ( )

and Standard Time ( ).

4. Press A to exit the setting screen.

• The DST indicator is displayed on the Timekeeping

Mode and Alarm Mode screens while Daylight Saving

Time is turned on.

Preset timer time

(Minutes Seconds)

Timekeepin

Mode time

Initial Timer Screen

Preset Timer

With the preset timer, you can select one of a number of

different preset start times. The timer starts counting down

as soon as you select a preset start time, and an alarm

sounds when the end of the countdown is reached.

• The following are the preset start times (in minutes):

1, 2, 3, 5, 10, 15, 20, 30, 45, 60.

• You can perform other Timekeeping Mode operations

while a countdown is in progress.

• Also, the countdown operation will continue even if you

change to another mode.

• All of the operations in this section are performed in the

Timekeeping Mode, which you enter by pressing C.

Timer Screen

Press .

Current date

Countdown Screen

2. While the timer screen is on the display, use D (+) and

B (–) to scroll through the preset start times.

• The following are the preset start times (in minutes): 0,

1, 2, 3, 5, 10, 15, 20, 30, 45, 60.

• The timer countdown will start automatically about two

seconds after you select a preset start time in step 2.

• If you press the L (Light) button within about two

seconds after performing step 2, the countdown will

start automatically about two seconds after you press

• Pressing in the Timekeeping Mode while aD

countdown is in progress will cause the countdown time

to be replaced by the current date.

• When the end of the countdown is reached, an alarm

sounds for about 10 seconds or until you press any

button.

To use the preset timer

1. In the Timekeeping Mode, press D. This displays the

initial timer screen.

• The initial timer screen always shows all zeros

( ).

• You will not be able to start a countdown while the

timer screen shows all zeros. If you leave the all zeros

screen on the display for about two seconds without

performing any button operation, the countdown time

will be replaced by the current date automatically.

Operation Guide 3035

Graphic

To cancel a preset timer operation

In the Timekeeping Mode, hold down for about two seconds.D

Graphic Area

When the end of a countdown is reached, the graphic

area will flash for 10 seconds or until you press any

button.

The table below shows how the graphic area indicates the

displayed preset start time and the remaining number of

minutes left in the countdown.

• The graphic area indicates the amount of countdown

time remaining no matter what mode the watch is in.

Graphic

Preset Start

Time

Remaining

Countdown

Time

01 00 02 00 03 00 05 00 10 00 15 00 20 00 30 00 45 00 60 00’ ’ ’ ’ ’ ’ ’ ’ ’ ’

00 01’

–

01 00’

01 01’

–

02 00’

02 01’

–

03 00’

03 01’

–

05 00’

05 01’

–

10 00’

10 01’

–

15 00’

15 01’

–

20 00’

20 01’

–

30 00’

30 01’

–

45 00’

45 01’

–

60 00’

City code

Current time in the zone

of the selected city code

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

To view the time for another city code

In the World Time Mode, press to scroll eastwardlyD

through city codes or to scroll westwardly.B

• For full information about city codes, see the “City Code

Table”.

• If the current time shown for a city is wrong, it could

mean that the Timekeeping Mode time or Home City

code settings is wrong. Check these settings and make

the necessary changes.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D B and to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about one second to toggle between

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

• The DST indicator is on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

• Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

• In the World Time Mode, you can switch the city code

you currently have selected as your Timekeeping Mode

Home City between Standard Time and DST. The

setting you select in the World Time Mode will also be

applied in the Timekeeping Mode.

DST indicator

1/100 second

Minutes

Seconds

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 59 minutes,

59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing .C

To measure times with the stopwatch

Elapsed Time

Start Stop Re-start Stop Clear

Start Split

( displayed)

Split release Stop Clear

Start Split Stop Split release Clear

Split Time

Two Finishes

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

Alarm time

(Hour : Minutes)

On/Off status

Alarm number

Alarms

You can set five independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached. One of the alarms is a snooze alarm,

while the other four are one-time alarms.

You can turn on an Hourly Time Signal that causes the

watch to beep twice every hour on the hour.

• There are six screens in the Alarm Mode. Four are for

one-time alarms (indicated by numbers from

through ), one is for a snooze alarm (indicated by

), and one is for the Hourly Time Signal (indicated

by ).

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

To set an alarm time

1. In the Alarm Mode, use D and B to scroll through the

alarm screens until the one whose time you want to set

is displayed.

Press .

• To set a one-time alarm, display one of the screens

indicated by an alarm number from through

. To set the snooze alarm, display the screen

indicated by .

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

• This operation turns on the alarm automatically.

3. Press C to move the flashing between the hour and minute settings.

4. While a setting is flashing, use D B (+) and (–) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. ( indicator) or p.m. ( indicator).A P

5. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, or until you turn the alarm off.

• To stop the alarm tone after it starts to sound, press any button.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the setting screen

To test the alarm

In the Alarm Mode, hold down to sound the alarm.D

To turn an alarm on and off

1. In the Alarm Mode, use D B and to select an alarm.

2. Press A to toggle it on ( displayed) and off

( displayed).

• Turning on a one-time alarm ( through )

displays the alarm on indicator on its Alarm Mode

screen.

• Turning on the snooze alarm ( ) displays the alarm

on indicator and snooze alarm indicator on the Alarm

Mode snooze alarm screen.

• The alarm on indicator is displayed in all modes when

any one of the alarms is turned on.

• The alarm on indicator flashes while the alarm is

sounding.

• The snooze alarm indicator flashes during the 5-minute

intervals between alarms.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D B and to select the Hourly

Time Signal ( ).

2. Press A to toggle it on ( displayed) and off

( displayed).

• The Hourly Time Signal on indicator is shown on the

display in all modes while the Hourly Time Signal is

turned on.

On/Off status

Alarm on indicator

Snooze alarm indicator

On/Off status

Hourly time signal

on indicator

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Baby-G BG-1001

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Baby-G BG-1001 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025