EtherWAN EL50 Manual

EtherWAN Audio/video konverter EL50

Læs gratis den danske manual til EtherWAN EL50 (2 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om EtherWAN EL50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EL50

04/09/2019

W70G-EL50Q1

EL50 Series Media Converter

Installation Guide

1 Unpacking

Open the carton and unpack the items. Your

package should include an EL50 media converter

and this Quick Install Guide. If items are missing

or damaged, notify your EtherWAN

representative.

Download the full manual at:

https://www.etherwan.com

2 Select Installation Location

Place the equipment where it will not be

subjected to extreme temperatures, humidity, or

electromagnetic interference. Specifically, the

site you select should meet the following

requirements:

 The ambient temperature should be between

32 and 113 degrees Fahrenheit (0 to 45

degrees Celsius).

 The relative humidity should be less than 95

percent, non-condensing.

 Surrounding electrical devices should not

exceed the electromagnetic field (RFC)

standards for IEC 801-3, Level 2 (3V/M) field

strength.

 Make sure that the equipment receives

adequate ventilation. Do not block the

ventilation holes on each side of the

equipment.

 The power outlet should be within 1.8 meters

of the product.

3 Connect Power

This Converter is a plug-and-play device.

Connect the supplied AC to DC power adaptor

to the receptacle on the rear panel of the

converter, and then attach the plug into a

standard AC outlet.

4 Ports and Port Settings

The Converter provides one TX port and one FX

port. For the FX port, options of Multi-mode

fiber using SC, ST, VF-45, MT-RJ or LC connector

or Single-mode fiber using SC or ST connector or

WDM fiber using single SC connector are

provided.

The TX port uses RJ-45 connector and auto

detects the speed at 10/100Mbps.

5 LED Indicators

The LED indicators give you instant feedback on

status of the converter:

LED

State

Indication

TX LNK/ACT

FX LNK/ACT

Steady

Valid network

connection established

Flashing

Transmitting or

receiving data

Off

Neither valid network

connection nor

transmitting/ receiving

data

Produkt Specifikationer

Mærke:	EtherWAN
Kategori:	Audio/video konverter
Model:	EL50

Har du brug for hjælp?

Hvis du har brug for hjælp til EtherWAN EL50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Audio/video konverter EtherWAN Manualer

EtherWAN EL2315 Manual

4 November 2025

EtherWAN EXT1200 Manual

3 November 2025

EtherWAN EL2242-BT Manual

2 November 2025

EtherWAN EL2321 Manual

2 November 2025

EtherWAN EM2000 Manual

2 November 2025

EtherWAN EXT1100 Manual

2 November 2025

EtherWAN INJ90BT-24 Manual

1 November 2025

EtherWAN EMC400 Manual

1 November 2025

EtherWAN EL100 Manual

1 November 2025

EtherWAN EL200 Manual

31 Oktober 2025

Audio/video konverter Manualer

Nyeste Audio/video konverter Manualer

Lynx Technik Yellowbrik CHD 1412 Manual

5 November 2025

Blustream IP300UHD-WP-TX Manual

5 November 2025

MuxLab 500756 Manual

5 November 2025

MuxLab 500755 Manual

4 November 2025

MuxLab 500033 Manual

4 November 2025

DVDO -XTEND-USBC-USB-100L Manual

4 November 2025

DVDO -XTEND-USBC-70 Manual

4 November 2025

MuxLab 500734-SM80 Manual

4 November 2025

MuxLab 500777-TX Manual

4 November 2025

Meridian ST-1HG-3FC Manual

4 November 2025