Casio LA20WH-4A1 Manual

Casio Ur LA20WH-4A1

Læs gratis den danske manual til Casio LA20WH-4A1 (2 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Casio LA20WH-4A1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Operation Guide 3284
E-9
Press 2. to change the selection in the following sequence.C
MinutesHour
Normal Alarm Mode (No digit fl ashes)
Press 3. to increase the selected digits. Holding down changes the number at A A
high speed.
The format (12-hour and 24-hour) of the alarm time matches the format you select x
for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time x
correctly as morning or afternoon ( ).PM
After you set the alarm time, use 4. to return to the Alarm Mode.C
If you do not operate any button for one or two minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode automatically.
E-8
Alarm
When the Daily Alarm is turned on, the alarm sounds for
20 seconds at the preset time each day. When the Hourly
Time Signal is turned on, the watch beeps every hour on
the hour.
All of the operations in this section are performed in the x
Alarm Mode, which you enter by pressing (page E-4).B
To set the alarm time
In the Alarm Mode, press 1. . The hour digits fl ash C
because they are selected.
This operation automatically turns on the alarm. x
Alarm on indicator
Hourly time signal
on indicator
Alarm time
(Hour : Minutes)
Mode indicator
E-7
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with x24H
indicator.
E-6
Timekeeping
Use the Timekeeping Mode to view the current time and
date.
Day of the week is displayed as follows. x
SU : Sunday MO : Monday
TU : Tuesday WE : Wednesday
TH : Thursday FR : Friday
SA : Saturday
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press to switch between the A
12-hour and 24-hour formats.
With the 12-hour format, the xPM indicator appears for
times in the range of noon to 11:59 p.m. and no indicator
appears for times in the range of midnight to 11:59 a.m.
PM indicator
Day of week
Day
Hour : Minutes Seconds
E-5
The watch returns to the Timekeeping Mode automatically if you do not perform any x
button operation for one or two minutes in the Alarm Mode and Time Setting Mode.
In any mode, press xC to illuminate the display.
Stopwatch Mode Time Setting Mode
E-4
General Guide
Press xB to change from mode to mode.
After you perform an operation in any mode, pressing xB returns to the Timekeeping
Mode.
Timekeeping Mode Alarm Mode
Press .B
E-3
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To toggle between 12-hour and 24-hour timekeeping ......................................... E-6
To set the alarm time ............................................................................................... E-8
To stop the alarm .................................................................................................. E-10
To switch the Daily Alarm and Hourly Time Signal on and off ......................... E-10
To test the alarm .................................................................................................... E-10
To measure times with the stopwatch ................................................................. E-12
To set the time and date .......................................................................................E-13
E-2
Contents
General Guide ..........................................................................................................E-4
Timekeeping .............................................................................................................E-6
Alarm ........................................................................................................................E-8
Stopwatch ..............................................................................................................E-11
Time Setting ...........................................................................................................E-13
Specifi cations ........................................................................................................E-15
E-1
Note that the product illustrations in this manual are intended for reference only, x
and so the actual product may appear somewhat different than depicted by an
illustration.
E
About This Manual
Depending on the model of your watch, display text x
appears either as dark fi gures on a light background, or
light fi gures on a dark background. All sample displays
in this manual are shown using dark fi gures on a light
background.
Button operations are indicated using the letters shown x
in the illustration.
Each section of this manual provides you with the x
information you need to perform operations in each
mode.
MA1104-EA
Operation Guide 3284
E-15
Specifi cations
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m., day, and day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Auto-calendar set at 28 days for February
Alarm: Daily alarm, Hourly time signal
Stopwatch
Measuring units: 1/100 seconds
Measuring capacity: 59 minutes, 59.99 seconds
Measuring modes: Elapsed time, split time, and two fi nishes
Illumination: LED (light-emitting diode)
Battery: One lithium battery
Type: CR1616
Battery life: Approx. 5 years
x 1 second of illumination operation per day
x 20 seconds of alarm operation per day
E-14
While the second’s digits are selected (fl ashing), press 3. to reset the seconds to A
. If you press while the second’s count is in the range of 30 to 59, the seconds A
are reset to and 1 is added to the minutes. If the second’s count is in the range of
00 to 29, the minute’s count is unchanged.
While any other digits (besides seconds) are selected (fl ashing), press 4. to A
increase the number. While the day of the week is selected, pressing advances A
to the next day. Holding down changes the current selection at high speed.A
After you set the time and date, press 5. to return to the Timekeeping Mode.B
If you do not operate any button for one or two minutes while a selection is fl ashing, x
the fl ashing stops and the watch goes back to the Timekeeping Mode automatically.
E-13
Time Setting
Use the Time Setting Mode to set the current time and
date.
To set the time and date
Use 1. to enter the Time Setting Mode (page E-5).B
The second’s digits fl ash because they are selected. x
Press 2. to change the selection in the following C
sequence.
MinutesSeconds
Month
Hour
Day
Day of
the Week
PM indicator
Day of week
Day
Hour : Minutes Seconds
E-12
To measure times with the stopwatch
(a) Elapsed time measurement
A A A A C
Start Stop Re-start Stop Clear
(b) Split time measurement
A C C A C
Start Split
( displayed)SPL
Split release Stop Clear
(c) Split time and 1st-2nd place times
A C A C C
Start Split
First runner
fi nishes.
Display time of
fi rst runner.
Stop
Second runner
fi nishes.
Split release
Display time of
second runner.
Clear
E-11
Stopwatch
The Stopwatch Mode lets you measure elapsed time, split
times, and two fi nishes. The range of the stopwatch is
59 minutes, 59.99 seconds.
The stopwatch continues to run, restarting from zero after x
it reaches its limit, until you stop it.
The stopwatch measurement operation continues even if x
you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a split time is frozen x
on the display clears the split time and returns to elapsed
time measurement.
All of the operations in this section are performed in the x
Stopwatch Mode, which you enter by pressing (page B
E-5).
Mode indicator
Minutes
1/100 second
Seconds
E-10
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To switch the Daily Alarm and Hourly Time Signal on and off
Press while in the Alarm Mode to change the status of the Daily Alarm and Hourly A
Time Signal in the following sequence.
Both on Both off Daily Alarm only Hourly Time
Signal only
To test the alarm
Hold down while in the Alarm Mode to sound the alarm.A

Produkt Specifikationer

Mærke: Casio
Kategori: Ur
Model: LA20WH-4A1

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio LA20WH-4A1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Casio Manualer

Casio

Casio AE2000W-1AV Manual

5 September 2025
Casio

Casio AEQ-110 Manual

4 September 2025
Casio

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025
Casio

Casio Baby-G BSA-B100 Manual

27 Juli 2025
Casio

Casio G-Shock GM-110 Manual

27 Juli 2025
Casio

Casio G-Shock GM-S5600 Manual

27 Juli 2025
Casio

Casio Edifice EF-527D-1A Manual

27 Juli 2025
Casio

Casio Edifice EFR-571 Manual

27 Juli 2025
Casio

Casio G-Shock GST-S110 Manual

27 Juli 2025
Casio

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko

Grand Seiko 9F85 Manual

12 September 2025
Grand Seiko

Grand Seiko 9R01 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R65 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R02 Manual

11 September 2025
Grand Seiko

Grand Seiko 9R15 Manual

11 September 2025
Citizen

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025
Citizen

Citizen L Mae EM1060-52N Manual

3 September 2025
Citizen

Citizen Corso Diamond EW2712-55E Manual

3 September 2025
Citizen

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025
Breitling

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025