Casio Pro Trek PRW-1500-1VER Manual

Casio Ur Pro Trek PRW-1500-1VER

Læs gratis den danske manual til Casio Pro Trek PRW-1500-1VER (15 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Casio Pro Trek PRW-1500-1VER, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

Operation Guide 3134 3205

MO1002-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out

of your purchase, be sure to read this manual carefully.

• This watch does not have a time zone that corresponds to the UTC

offset of –3.5 hours. Because of this, the radio-controlled timekeeping

and World Time functions will not display the correct time for

Newfoundland, Canada.

Applications

The built-in sensors of this watch measure direction, barometric pressure,

temperature and altitude. Measured values are then shown on the display.

Such features make this watch useful when hiking, mountain climbing, or

when engaging in other such outdoor activities.

Keep the watch exposed to bright light

The electricity generated by the solar cell of the

watch is stored by a built-in battery. Leaving or

using the watch where it is not exposed to light

causes the battery to run down. Make sure the

watch is exposed to light as much as possible.

• When you are not wearing the watch on your

wrist, position the face so it is pointed at a

source of bright light.

• You should try to keep the watch outside of

your sleeve as much as possible. Charging is

reduced significantly if the face is covered only

partially.

Bright light

Solar cell

• The watch continues to operate, even when it is not exposed to light.

Leaving the watch in the dark can cause the battery to run down, which will

result in some watch functions being disabled. If the battery goes dead, you

will have to re-configure watch settings after recharging. To ensure normal

watch operation, be sure to keep it exposed to light as much as possible.

If the display of the watch is blank...

If the display of the watch is blank, it means that the watch’s Power Saving

function has turned off the display to conserve power.

• See “Power Saving” for more information.

About This Manual

• Depending on the model of your watch, display

text appears either as dark figures on a light

background (Module 3134), or light figures on

a dark background (Module 3205). All sample

displays in this manual are shown using dark

figures on a light background.

• Button operations are indicated using the

letters shown in the illustration.

• Each section of this manual provides you with

the information you need to perform operations

in each mode. Further details and technical

information can be found in the “Reference”

section.

(Light)

Module 3134

Module 3205

General Guide

• The illustration below shows which buttons you need to press to navigate

between modes.

• In any mode, press to illuminate the display.L

• You can use buttons , and to enter a sensor mode directly fromA, B C

the Timekeeping Mode or from another sensor mode. To enter a sensor

mode from the Tide/Moon Data, Countdown Timer, Stopwatch, World Time,

Alarm, Data Recall, or Receive Mode, first enter the Timekeeping Mode

and then press the applicable button.

Timekeeping Mode

Altimeter Mode

Stopwatch

Mode

Countdown

Timer Mode

Digital

Compass Mode

Press D.

Press .B

Alarm Mode

Press C.

Sensor Modes

World Time Mode

Barometer/

Thermometer Mode

Press .A

Data Recall

Mode

▲

Receive Mode

▲

Tide/Moon Data

Mode

▲

Press

Warning!

• The measurement functions built into this watch are not intended for

taking measurements that require professional or industrial precision.

Values produced by this watch should be considered as reasonable

representations only.

• The Moon phase indicator and tide graph data that appear on the

display of this watch are not intended for navigation purposes. Always

use proper instruments and resources to obtain data for navigation

purposes.

• This watch is not an instrument for calculating low tide and high tide

times. The tide graph of this watch is intended to provide a reasonable

approximation of tidal movements only.

• When engaging in mountain climbing or other activities in which losing

your way can create a dangerous or life-threatening situation, always be

sure to use a second compass to confirm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for

any damage or loss suffered by you or any third party arising through

the use of this product or its malfunction.

Bright light

Electrical

energy

All

functions

enabled

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Charge

Solar cell

(Converts light to

electrical power.)

Rechargeable battery

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Some

functions

disabled

Dis-

charge

Battery charges in the light. Battery discharges in the dark.

• The actual level at which some functions are disabled depends on the

watch model.

• Frequent display illumination can run down the battery quickly and require

charging. The following guidelines give an idea of the charging time

required to recover from a single illumination operation.

Approximately five minutes exposure to bright sunlight coming in through

a window

Approximately 50 minutes exposure to indoor fluorescent lighting

• Be sure to read “Power Supply” for important information you need to

know when exposing the watch to bright light.

Operation Guide 3134 3205

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting

accordingly.

• This watch is designed to pick up the time calibration signals transmitted in

Germany (Mainflingen), England (Anthorn), the United States (Fort Collins)

and Japan.

• See the information under Signal Reception Troubleshooting if you“ ”

experience problems with time calibration signal reception.

Current Time Setting

This watch adjusts its time setting automatically in accordance with a time

calibration signal. You also can perform a manual procedure to set the time

and date, when necessary.

• The first thing you should do after purchasing this watch is to specify

your Home City (the city where you normally will use the watch). For

more information, see “To specify your Home City”.

• When using the watch outside the areas covered by the time signal

transmitters, you will have to adjust the current time setting manually as

required. See “Timekeeping” for more information about manual time

settings.

• The U.S. time calibration signal can be picked up by the watch while in

North America. The term North America“ ” in this manual refers to the area

that consists of Canada, the continental United States, and Mexico.

• Using this watch in a country covered by a time calibration that is different

from the countries it supports may result in incorrect time indication due to

local application of summer time, etc.

To specify your Home City

1. In the Timekeeping Mode, hold down untilE

the city code starts to flash, which indicates

the setting screen.

2. Press A C (east) and (west) to select the

city code you want to use as your Home City.

LON : London

PAR, BER : Paris, Berlin, Milan, Rome,

Amsterdam, Hamburg, Frankfurt,

Vienna, Barcelona, Madrid

ATH : Athens

HKG,

TYO,

SEL :

Hong Kong, Tokyo, Seoul

HNL : Honolulu

ANC : Anchorage, Nome

LAX : Los Angeles, San Francisco, Las Vegas, Seattle/Tacoma,

Vancouver, Tijuana

DEN : Denver, El Paso, Edmonton, Culiacan

City code

Hour :

Minute

PM indicator

Second

Month – Day

CHI : Chicago, Houston, Dallas/Fort Worth, New Orleans, Winnipeg,

Mexico City

NYC: New York, Detroit, Miami, Boston, Montreal

• For full information on city codes, see the “City Code Table”.

• Note that this watch does not have a city code that corresponds to

Newfoundland.

3. Press E to exit the setting screen.

• Normally, your watch should show the correct time as soon as you select

your Home City code. If it does not, it should adjust automatically after the

next auto receive operation (in the middle of the night). You also can

perform manual receive or you can set the time manually.

• The watch will receive the time calibration signal automatically from the

applicable transmitter (in the middle of the night) and update its settings

accordingly. For information about the relationship between city codes and

transmitters, see “ ”Time Calibration Signal Reception and “Transmitters”.

• See the maps under “ ”Approximate Reception Ranges for information about

the reception ranges of the watch.

• Under factory default settings, auto receive is turned off for all of the

following city codes: (Hong Kong), (Honolulu), and HKG HNL ANC

(Anchorage). For details about turning on auto receive for these city codes,

see “To turn auto receive on and off”.

• You can disable time signal reception, if you want. See “To turn auto receive

on and off for more information.”

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration

signal: auto receive and manual receive.

• Auto Receive

With auto receive, the watch receives the time calibration signal automatically

up to six times a day. When any auto receive is successful, the remaining

auto receive operations are not performed. For more information, see “About

Auto Receive”.

• Manual Receive

Manual receive lets you start a time calibration receive operation with the

press of a button. For more information, see “To perform manual receive”.

• Proper signal reception can be difficult or even impossible under the

conditions listed below.

• Signal reception normally is better at night than during the day.

• Time calibration signal reception takes from two to seven minutes, but in

some cases it can take as long as 14 minutes. Take care that you do not

perform any button operations or move the watch during this time.

Inside or

among

buildings

Inside a

vehicle

Near a

construction

site, airport,

or other

sources of

electrical

noise

Near high-

tension

power lines

Among or

behind

mountains

Near

household

appliances,

office

equipment,

or a mobile

phone

• The time calibration signal the watch will attempt to pick up depends on its

current Home City code setting as shown below.

Home City Code

LON,

PAR , BER, ATH

HKG*, TYO, SEL

HNL ANC LAX*, *, ,

DEN, CHI, NYC

Frequency

60.0 kHz

77.5 kHz

40.0 kHz

60.0 kHz

Transmitter

Anthorn (England)

Mainflingen (Germany)

Fukushima (Japan)

Fukuoka/Saga (Japan)

Fort Collins, Colorado

(United States)

* The areas covered by the HKG HNL ANC, , and city codes are quite far

from the time calibration signal transmitters, and so certain conditions

may cause problems with signal reception.

Anthorn

Mainflingen

1,500 kilometers

500 kilometers

Fort

Collins

2,000 miles

(3,000 kilometers)

600 miles

(1,000 kilometers)

1,000

kilometers

1,000

kilometers

Fukuoka/Saga

500

kilometers

Fukushima

500

kilometers

Approximate Reception Ranges

U.K. and German Signals U.S. Signal

Japan Signals

• Signal reception may not be possible at the distances noted below during

certain times of the year or day. Radio interference also may cause

problems with reception.

Mainflingen (Germany) or Anthorn (England) transmitters: 500

kilometers (310 miles)

Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)

Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310

miles)

• Even when the watch is within the reception range of the transmitter, signal

reception will be impossible if the signal is blocked by mountains or other

geological formations between the watch and signal source.

• Signal reception is affected by weather, atmospheric conditions, and

seasonal changes.

Important!

• When getting ready to receive the time calibration signal, position the watch

as shown in the nearby illustration, with its 12 o’clock side facing towards a

window. This watch is designed to receive a time calibration signal late at

night. Because of this, you should place the watch near a window as shown

in the illustration when you take it off at night. Make sure there are no metal

objects nearby.

12 o’clock

• Make sure the watch is facing the right way.

Produkt Specifikationer

Mærke:	Casio
Kategori:	Ur
Model:	Pro Trek PRW-1500-1VER

Har du brug for hjælp?

Hvis du har brug for hjælp til Casio Pro Trek PRW-1500-1VER stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur Casio Manualer

Casio AE2000W-1AV Manual

5 September 2025

Casio AEQ-110 Manual

4 September 2025

Casio G-Shock GA-700UC-3A Manual

28 Juli 2025

Casio Baby-G BSA-B100 Manual

27 Juli 2025

Casio G-Shock GM-110 Manual

27 Juli 2025

Casio G-Shock GM-S5600 Manual

27 Juli 2025

Casio Edifice EF-527D-1A Manual

27 Juli 2025

Casio Edifice EFR-571 Manual

27 Juli 2025

Casio G-Shock GST-S110 Manual

27 Juli 2025

Casio Baby-G BGD-570 Manual

27 Juli 2025

Ur Manualer

Nyeste Ur Manualer

Grand Seiko 9F85 Manual

12 September 2025

Grand Seiko 9R01 Manual

11 September 2025

Grand Seiko 9R65 Manual

11 September 2025

Grand Seiko 9R02 Manual

11 September 2025

Grand Seiko 9R15 Manual

11 September 2025

Citizen Attesa Satellite Wave GPS Layers of Time CC4057-60E Manual

3 September 2025

Citizen L Mae EM1060-52N Manual

3 September 2025

Citizen Corso Diamond EW2712-55E Manual

3 September 2025

Citizen Attesa Radio Controlled Layers of Time AT8286-65E Manual

3 September 2025

Breitling AVI Ref. 765 1964 Re-Edition Manual

28 August 2025