Celly SOLARPRO10W Manual

Celly Ikke kategoriseret SOLARPRO10W

Læs gratis den danske manual til Celly SOLARPRO10W (30 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Celly SOLARPRO10W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

Read this user manual and in

particular the safety notes,

before using the product.

Keep the user manual for future

reference and include it when passing the

product on to third parties.

Esprinet S.p.A. will not in any way be

held responsible for injury or damage

caused to persons or property arising

from misuse of the product.

Safety notes

Avoid overheating the electronic board

with USB port. During use, keep the

board with USB port protected from

direct sunlight.

Avoid excessive overheating

During use the product will be subject of

high temperature: pay attention to not

burn yourself.

Do not use the product if it is damaged.

Never touch the product with wet or

damp hands.

Do not use in damp rooms or in the rain.

Never insert metallic objects such as

keys or paper clips into the openings of

the product.

To prevent malfunction or damage to the

product, avoid accidental falls, do not

crush, puncture or exercise a high level of

pressure on the product.

Keep away from humidity, water or other

liquids. If the product comes into contact

with water, moisture or other liquids, do

not use it to avoid any electrical shock

or damage.

Do not store or expose your product to

any source of heat, radiators, stoves

or other heat sources such as the

dashboard of your car in the summer.

Never operate the product unsupervised.

During operation, the housing may

become hot.

Never use the product when moving from

a cold to a warm environment.

Condensation may occur and, in some

cases, damage the product. Allow the

product to reach room temperature

before connecting and using it again. is

could take several hours.

Temperature of use: 0–40 °C.

Do not try to modify, repair or

disassemble the product.

Do not use a damaged product. Do

not under any circumstances use

aggressive cleaning agents, alcohol or

other chemical solutions for cleaning as

they can damage the housing or even

impair the functionality of the product.

Disconnect all connected cables before

you start cleaning. Do not immerse

the product in water or other liquids.

ere are no serviceable parts inside

the product. Never open/disassemble it.

Keep the product out of reach of children.

Never allow children or persons with

disabilities to use electrical products

without supervision. Make sure that

children do not play with the plastic

wrapping. they may swallow it when

playing and suﬀocate.

Use

1- Once unfolded the product, place it

on a ﬂat surface, away from direct water

jets, with solar panels facing the sunlight.

Place the board with USB port protected

from direct sunlight.

2. Connect your cable to the device you

want to charge.

3. Connect the USB cable to the solar

charger’s USB port.

4. With suﬃcient sunglight, charging of

your device will be started.

5. Disconnect the USB cable from the

charger after use.

6. Store the charger safe, in a dry

environment away from heat sources.

Cleaning

Disconnect all cables before cleaning.

If necessary, clean the solar charger with

a damp cloth and let it dry completely

before use.

Use a clean brush with soft, long bristles

to remove dust on the connectors.

Do not use any solvents, corrosive or

gaseous cleaning agents.

Make sure no water or other liquids

penetrate the housing.

Disposal of the product

(Applicable in countries with

separate collection systems of

recyclable materials) Old products may

not be disposed of in the household

waste! Should the product no longer be

capable of being used at some point in

time, dispose of it in accordance with the

regulations in force in your country.

is ensures that old products are

recycled in a professional manner and

also rules out negative consequences for

the environment.

For this reason, electrical equipment is

marked with the symbol shown here.

Technical speciﬁcations

Conversion eﬃciency: 22%

Output: DC 5V/2A

Weight: 220g

Temperature of use: 0-40 ° C

is product complies with

RoHS 2011/65/EU and

2015/863/EU. e product

carries the CE mark and complies with

safety standards established by the

European Union.

Celly® is a trademark owned by Esprinet

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy

Park 20, 20871 Vimercate

(MB) - Italy

Made in China.

User manual

SOLAR CHARGER WITH USB

Model: SOLARPRO10W

Rev00 - 01.03.2022

Produkt Specifikationer

Mærke:	Celly
Kategori:	Ikke kategoriseret
Model:	SOLARPRO10W
Kode for international beskyttelse (IP):	IP67
Produktfarve:	Black, Orange
Strømkilde type:	Solar
Oplader, kompabilitet:	Smartphone
Oplader type:	Udendørs
USB strømforsyning op til:	10 W