Chamberlain KLIK3C-SS Manual

Chamberlain Fjernbetjening KLIK3C-SS

Læs gratis den danske manual til Chamberlain KLIK3C-SS (16 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Chamberlain KLIK3C-SS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
®®
MODEL KLIK3C-BK2
MODEL KLIK3C-SS
MODEL KLIK5C-BK2
MODEL KLIK5C-SS
UNIVERSAL REMOTE CONTROL
Your remote control can be programmed to operate
up to two devices, such as a garage door opener,
gate operator, or commercial door operator and has
a SMART/ LEARN button. Each button on the remote
control works independently of the other and must
be programmed separately. The images throughout
this manual are for reference only and your product
may look different.
STOP
Read instructions thoroughly
BEFORE beginning. If you are using
this product with residential door
openers, this product must be used
only with door openers manufactured
starting January 1, 1993 that use photoelectric
sensors located near the bottom of the door track.
IMPORTANT: The remote will activate your door or
gate during programming. Be sure the door is clear
of ALL obstructions. Start with the garage door
closed. Make sure the garage door opener has a
working light because it is a programming indicator.
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
CONNECT TO THE MYQ®APP
1. Close the garage door.
IMPORTANT: The remote activates the garage
door during programming. Ensure the door is
clear of all obstructions.
2. Look for a Wi-Fi or a Powered by myQ®logo
to determine if your garage door opener is
myQ®compatible. If not, proceed to
programming.
Or
®
3. To start on monitoring the garage door
movements, scan the QR code to download
the myQ®app .
4. To add your remote and name, follow the in-
app instructions in order .
5. After completing setup in the app, you can
control the garage door opener and to receive
notices ever time your garage door opens and
closes.
GETTING STARTED
Determine if the product you are programming the
remote control to has a SMART/LEARN button or
DIP Switches. The SMART/ LEARN button or DIP
Switches are located either on the product or in an
external receiver on or near the product. The
following instructions are for a garage door opener
with a SMART/LEARN Button. For DIP Switch
programming instructions or additional help, see
support.chamberlaingroup.com.
SMART/
LEARN Button
OR

Produkt Specifikationer

Mærke: Chamberlain
Kategori: Fjernbetjening
Model: KLIK3C-SS

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain KLIK3C-SS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Chamberlain Manualer

Chamberlain

Chamberlain CH382C Manual

12 August 2025
Chamberlain

Chamberlain CHU62C Manual

12 August 2025
Chamberlain

Chamberlain KLIK5C-SS Manual

5 August 2024
Chamberlain

Chamberlain KLIK5C-BK2 Manual

2 August 2024
Chamberlain

Chamberlain KLIK3C-SS Manual

1 August 2024
Chamberlain

Chamberlain 956EVC-P2 Manual

8 Februar 2024
Chamberlain

Chamberlain 940EVC-P2 Manual

13 December 2023
Chamberlain

Chamberlain 953EVC-P2 Manual

4 December 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Absima

Absima CR7P Manual

29 September 2025
Insignia

Insignia NS-RMTSNY21 Manual

29 September 2025
Insignia

Insignia NS-RMT8D21 Manual

29 September 2025
ProMaster

ProMaster PRO5439 Manual

29 September 2025
Insignia

Insignia NS-RMTVIZ21 Manual

29 September 2025
ProMaster

ProMaster PRO7599 Manual

29 September 2025
ProMaster

ProMaster PRO1782 Manual

29 September 2025
ProMaster

ProMaster PRO7337 Manual

29 September 2025
ProMaster

ProMaster PRO7606 Manual

29 September 2025
Neets

Neets 310-0350 Manual

29 September 2025