Chamberlain KLIK5C-SS Manual

Chamberlain Fjernbetjening KLIK5C-SS

Læs gratis den danske manual til Chamberlain KLIK5C-SS (16 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Chamberlain KLIK5C-SS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

®®

MODEL KLIK3C-BK2

MODEL KLIK3C-SS

MODEL KLIK5C-BK2

MODEL KLIK5C-SS

UNIVERSAL REMOTE CONTROL

Your remote control can be programmed to operate

up to two devices, such as a garage door opener,

gate operator, or commercial door operator and has

a SMART/ LEARN button. Each button on the remote

control works independently of the other and must

be programmed separately. The images throughout

this manual are for reference only and your product

may look different.

STOP

Read instructions thoroughly

BEFORE beginning. If you are using

this product with residential door

openers, this product must be used

only with door openers manufactured

starting January 1, 1993 that use photoelectric

sensors located near the bottom of the door track.

IMPORTANT: The remote will activate your door or

gate during programming. Be sure the door is clear

of ALL obstructions. Start with the garage door

closed. Make sure the garage door opener has a

working light because it is a programming indicator.

WARNING: This product can expose you

to chemicals including lead, which are

known to the State of California to cause

cancer or birth defects or other reproductive harm.

For more information go to

www.P65Warnings.ca.gov

CONNECT TO THE MYQ®APP

1. Close the garage door.

IMPORTANT: The remote activates the garage

door during programming. Ensure the door is

clear of all obstructions.

2. Look for a Wi-Fi or a Powered by myQ®logo

to determine if your garage door opener is

myQ®compatible. If not, proceed to

programming.

3. To start on monitoring the garage door

movements, scan the QR code to download

the myQ®app .

4. To add your remote and name, follow the in-

app instructions in order .

5. After completing setup in the app, you can

control the garage door opener and to receive

notices ever time your garage door opens and

closes.

GETTING STARTED

Determine if the product you are programming the

remote control to has a SMART/LEARN button or

DIP Switches. The SMART/ LEARN button or DIP

Switches are located either on the product or in an

external receiver on or near the product. The

following instructions are for a garage door opener

with a SMART/LEARN Button. For DIP Switch

programming instructions or additional help, see

support.chamberlaingroup.com.

SMART/

LEARN Button

Produkt Specifikationer

Mærke:	Chamberlain
Kategori:	Fjernbetjening
Model:	KLIK5C-SS

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain KLIK5C-SS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fjernbetjening Chamberlain Manualer

Chamberlain CH382C Manual

12 August 2025

Chamberlain CHU62C Manual

12 August 2025

Chamberlain KLIK5C-SS Manual

5 August 2024

Chamberlain KLIK5C-BK2 Manual

2 August 2024

Chamberlain KLIK3C-SS Manual

1 August 2024

Chamberlain 956EVC-P2 Manual

8 Februar 2024

Chamberlain 940EVC-P2 Manual

13 December 2023

Chamberlain 953EVC-P2 Manual

4 December 2022

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

GYS RC-HD4 Manual

2 Oktober 2025

Insignia NS-RMTLG21 Manual

2 Oktober 2025

Insignia NS-RMTSAM21 Manual

1 Oktober 2025

Hama Universal Remote 00221064 Manual

1 Oktober 2025

WiiM Remote Manual

1 Oktober 2025

WiiM Remote 2 Manual

1 Oktober 2025

Absima CR7P Manual

29 September 2025

Insignia NS-RMTSNY21 Manual

29 September 2025

Insignia NS-RMT8D21 Manual

29 September 2025

ProMaster PRO5439 Manual

29 September 2025