Chauvet COLORstrip Pix ILS Manual

Chauvet lampe COLORstrip Pix ILS

Læs gratis den danske manual til Chauvet COLORstrip Pix ILS (8 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Chauvet COLORstrip Pix ILS, eller vil du spørge andre brugere om produktet?

Side 1/8
Quick Reference Guide
English EN
Español ES
Français FR
Deutsch DE
Italiano IT
Nederlands NL
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
COLORstrip Pix ILS QRG Rev. 2
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the COLORstrip Pix ILS.
What is Included
Control Panel Description
ILS Connection
The COLORstrip Pix ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated
Lighting System (ILS) ecosystem (patent pending). For more information about configuring the COLORstrip Pix ILS into
ILS mode, please refer to the User Manual available at www.chauvetdj.com.
ALWAYS:
Connect to a grounded circuit.
Connect to operating voltages as specified on the product's spec sticker.
Disconnect from power before replacing the fuse.
Disconnect from its power source during periods of inactivity.
Use a safety cable when suspending overhead.
Heed all restrictions and warnings on the spec sticker.
Mount in a location with at least 20 in (50 cm) of ventilation.
Replace the fuse with the same type and rating.
Use a clamp with a captive bolt when a single hanging bracket is used.
In the event of a serious operating problem, stop using immediately.
DO NOT:
Open this product or attempt any repairs. It contains no user-serviceable parts.
Look at the light source when the product is on.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Touch the housing when it is on.
Block any ventilation holes/slots in the housing.
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Submerge.
Leave outdoors for extended periods of time.
Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation,
or shock.
Set this product on a flammable surface.
COLORstrip Pix ILS
Power cable
Quick Reference Guide
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function


Produkt Specifikationer

Mærke: Chauvet
Kategori: lampe
Model: COLORstrip Pix ILS

Har du brug for hjælp?

Hvis du har brug for hjælp til Chauvet COLORstrip Pix ILS stil et spørgsmål nedenfor, og andre brugere vil svare dig