Wash FX™ QRG EN
2
The Wash FX Quick Reference Guide (QRG) has basic product
information such as
mounting, menu options, and DMX values. For more
information, download the User Manual from the Chauvet
http://www.chauvetlighting.com.
The information and specifications contained in this QRG are subject to change
without notice.
The following Safety Notes include important information about installation, use,
and maintenance.
• Always connect the product to a grounded circuit.
• Make sure the power cord is not crimped or damaged.
• Always disconnect the product from the power source before cleaning it or
replacing the fuse.
• Never disconnect the product from the power source by pulling or tugging on
the cord.
• If mounting the product overhead, make sure there is adequate support for the
product’s weight and always secure the product using a safety cable.
• Make sure there are no flammable materials close to the product when it is
operating.
• Avoid direct eye exposure to the light source while the product is on.
• Do not touch the product’s housing when the product is operating because the
housing can be very hot.
• The product is not intended for permanent installation.
• The product is for indoor use only. It is rated at IP20.
• Do not expose the product to rain or moisture.
• Always connect the product to a power source that is within the voltage range
stated on the label or rear panel of the product.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Always install the product in a location with adequate ventilation.
• Always leave at least 20 in (50 cm) between the product and adjacent
surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Do not operate the product at an ambient temperature higher than
104 °F (40 °C).
• Never carry the product by the power cord or any moving part.
• Always use the mounting/hanging bracket to lift the product.
• If there is a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by untrained people can
lead to damage or malfunction.
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
• From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the
distributor of record to request support or return a product.
• From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information
in Contact Us at the end of this QRG.
