Chicco KeyFit 35 ClearTex Canopy Manual

Chicco Ikke kategoriseret KeyFit 35 ClearTex Canopy

Læs nedenfor 📖 manual på dansk for Chicco KeyFit 35 ClearTex Canopy (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 27 personer og blev bedømt med 4.3 stjerner i gennemsnit af 14 brugere

Side 1/2
WARNING: Avoid serious injury or death to your child. You
must read and understand the Canopy Features instructions and
the instructions in the User Guide. If you do not understand these
instructions, STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
KeyFit® 35 Zip ClearTex Canopy Features
IMPORTANT: Please also refer to the instructions that came with your product.
Open Canopy fully and locate the zipper on the Back Panel, as shown. Unzip the zipper slider and remove the
zipper pin from the retainer box to separate both sections of the zipper.
1
1
SS0027E_02
Canopy Mesh Panel:
Pull the Back Panel Fabric forward to lay flat over top
of the middle Canopy section.
2 To close the Mesh Panel, pull the Back Panel Fabric
back over the Mesh Panel. Secure both sides of the Zipper
together and pull the zipper slider up and over the Canopy
to close off the Mesh Panel.
3
2
With the Canopy fully open, locate the zipper on the Front Panel, as shown. Unzip the zipper and fold back the
front panel.
4
Canopy Privacy Shield:
Remove the Privacy Shield from the Front Panel section. Pull the Privacy Shield forward, and drape the shield
over the car seat. Secure the Privacy Shield using 4 snap buttons. Locate 2 snap buttons (a) on the front corners of the
car seat, as shown. Next locate and secure 2 snap buttons (b) below the seat belt guide on each side of the car seat, as
shown. Make sure the snaps are always secured. DO NOT let unsecured privacy shield hang loose.
5
a.
b.


Produkt Specifikationer

Mærke: Chicco
Kategori: Ikke kategoriseret
Model: KeyFit 35 ClearTex Canopy

Har du brug for hjælp?

Hvis du har brug for hjælp til Chicco KeyFit 35 ClearTex Canopy stil et spørgsmål nedenfor, og andre brugere vil svare dig