Thank you for choosing a Chord effect pedal to give your instrument a new sound dimension. Please
read below for an explanation of the controls and to get the best results from your new effect.
Each Chord -series effect pedal is supplied with a 9V battery, which needs to be connected to the 50
battery clip inside the underside battery compartment. Carefully remove the plastic cover by squeezing
its clip and levering outwards. Clip back into place once the battery is fitted.
Controls and connections are described below.
The OD-50 provides an overdrive effect when switched on, which emulates an over-driven amplifier to
give an aggressive, thrashy and distorted character to the guitar tone. The resulting sound is hard-
edged and compressed, ideal for many genres of rock music.
Increase Gain for more distortion and counteract the resulting increase in volume by backing off the
Level control. Use the Tone control to tame the edgy sound or help it cut through the mix for solos.
Unplug the guitar input jack to preserve the battery when not in use. If the pedal is not being used for
long periods, it is advised to remove the 9V battery. Optional external power can be from a 9Vdc
adaptor, centre- gative polarity w a rating of 100mA or higher recommended. ne ith
Disposal: that the product is classed as Electrical The “Crossed Wheelie Bin” symbol on the product means
or Electronic equipment and should not be disposed with other household or commercial waste
Errors and omissions excepted. Copyright© 2023. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Par New Mallow Road, Cork, Irelandk,